journal article·2023-06Open access

Use of miniaturized tensile specimens to evaluate the ductility and formability of dual phased steels for Rapid Alloy Prototyping

Lintao Zhang, Will Harrison, Mazher A. Yar, Shahin Mehraban, Stephen G.R. Brown, Nicholas P. Lavery

Abstract

This work aims to investigate feasibility of using non-standard miniaturized tensile specimens (MTS) to characterize total elongation and formability behaviour of dual phase steels: to establish the scaling rules for MTS to predict a range of mechanical properties of steels obtained through rapid alloy prototyping (RAP) in the laboratory. Accurate measurement of these properties using miniature specimens allows the formability behaviour of materials produced using RAP, a process which can produce lab scale samples of < 100 grams. This allows the effects of multiple compositions and thermomechanical processing parameters on formability to be evaluated. For this study, the ability of miniature tensile specimens to characterize ductility, forming limits and r-values has been compared to properties measured using standard sized tensile specimens for the dual phase steels, DP600 and DP800. 5 different tensile specimens were investigated, with gauge lengths varying from 80 mm to 5 mm and samples were taken at different orientations to the rolling direction. Total elongation was evaluated against slimness ratio for each tensile sample using the Bertelle–Oliver method and good correlations were obtained, despite specimen thicknesses being below the critical value, and the tensile strength of DP800 exceeding the limit stated for the method. Forming limit curves (FLC) were predicted using the Keeler–Brazier method, based on tensile data obtained using the standard and non-standard tensile specimens These curves compared favourably to experimentally obtained FLCs, however the curve predicted using the miniaturized tensile specimen over-predicted the major strain. The anisotropy of the rolled sheet steels was characterized from r-values obtained from tensile tests performed at different orientations to the rolling direction. Values obtained from the miniature tensile test were comparable to those obtained from standard tests within the range of scatter. The results obtained through this study provide confidence in using the miniature tensile specimens to predict the formability of heterogeneous alloys such as DP steels, manufactured using the RAP process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Granbom · 2010
2. Yu · 2005
3. Advanced high strength steels (AHSS) for automotive applications tailored properties by smart microstructural adjustment10.1002/srin.201700210 ↗
4. Rapid alloy prototyping for a range of strip related advanced steel grades
5. Rapid alloy prototyping for strip steel development: DP800 steel case study10.1080/03019233.2021.1880036 ↗
6. Laser additively manufactured intensive dual-phase steels and their microstructures, properties and corrosion resistance10.1016/j.matdes.2020.108710 ↗
7. The development of miniature tensile specimens with non-standard aspect and slimness ratios for rapid alloy prototyping processes10.1016/j.jmrt.2021.09.029 ↗
8. Davis · 2004
9. Tensile plasticity of miniature specimens for a low alloy steel investigated by digital image correlation technique10.1002/srin.202000685 ↗
10. Study and analysis on the tensile test elongation variation law for high-strength pipeline steel10.1007/s11665-020-04665-5 ↗
11. Effects of specimen thickness in tensile tests on elongation and deformation energy for industrially pure iron10.2355/isijinternational.ISIJINT-2016-555 ↗
12. Critical assessment 10: tensile elongation of strong automotive steels as function of testpiece geometry10.1179/1743284714Y.0000000707 ↗
13. On the total elongation of advanced high-strength steels
14. International Organization for Standardization, Steel-Conversion of Elongation Values-Part 1: Carbon and Low Alloy Steels, ISO 2566-1, 1984.
15. BSI British Standards · 2009
16. Proposed new criteria of ductility from a new law connecting the percentage elongation with size of test-piece10.1243/PIME_PROC_1928_115_019_02 ↗
17. Relationship between laboratory material characterization and press-shop formability
18. Tensile deformation
19. 2013
20. 2019
21. Microstructure-based multiscale and heterogeneous elasto-plastic properties of 2205 duplex stainless steel welded joints: Experimental and modeling10.1016/j.ijplas.2022.103474 ↗
22. Forming limit analysis of DP600-800 steels
23. An in-plane bending test to characterize edge ductility in high-strength steels
24. Metallographic analysis of failure mechanisms during Nakajima tests for the evaluation of forming limits on a dual phase steel10.1088/1757-899X/418/1/012047 ↗
25. H. Schmida, P. Hetza, M. Merklein, Failure behavior of different sheet metals after passing a drawbead, in: 47th SME North American Manufacturing Research Conference, Penn State Behrend Erie, Pennsylvania, 2019.10.1016/j.promfg.2019.06.129 ↗
26. Prediction of forming limit diagrams from tensile tests of automotive grade steels by a machine learning approach10.1088/1757-899X/1157/1/012080 ↗
27. Size effect on the post-necking behaviour of Dual-phase 800 Steel: modelling and experiment10.3390/ma16041458 ↗
28. Scaling effects in miniaturised tensile testing on mechanical properties and plastic anisotropy r-values in Interstitial Free Steel