Quantifying the effect of macrozones on the cold-dwell fatigue response of UD-rolled Ti-6Al-4V using high-energy X-ray diffraction
Source abstract
Abstract
High-energy X-ray diffraction is used to investigate the evolution of elastic lattice strains in rolled Ti-6Al-4V specimens during cyclic loading in-situ with and without the inclusion of a 120 s dwell period. A 1 mm segment of the gauge section is monitored throughout the first 100 cycles for specimens extracted along the rolling direction (RD), the transverse direction (TD) and 45° between the two, to explore the effects of texture on the evolution of the micromechanical response. Five families of lattice planes from the hexagonal phase are analysed with emphasis on lattice strain measured at the peak of each cycle, while macroscopic strain accumulation is simultaneously monitored via Digital Image Correlation. In cyclic loading conditions including a dwell period at load, a prominent increase in elastic strains is observed in prismatic and basal lattice planes with the specimen loaded from the rolling direction. In the absence of dwell, both RD and TD specimen orientations exhibited subtle cyclic hardening in all families of lattice planes probed despite negligible evolution in accumulated macroscopic plastic strain. Estimations of lattice orientation-dependent stresses are also presented using directional moduli to examine redistribution of load across sets of grains with the increasing cycle count.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Lutjering · 2007
2. Dwell sensitive fatigue in a near alpha titanium alloy at ambient temperature10.1016/S0142-1123(97)00020-0 ↗
3. Dwell-sensitive fatigue under biaxial loads in the near-alpha titanium alloy IMI68510.1016/0142-1123(94)90194-5 ↗
4. The effect of hold time on the fatigue properties of a β-processed titanium alloy10.1007/BF02811727 ↗
5. Effect of microstructure on dwell fatigue behavior of Ti-6242
6. Discrete dislocation and crystal plasticity analyses of load shedding in polycrystalline titanium alloys10.1016/j.ijplas.2016.08.009 ↗
7. Microtexture analysis and modeling of ambient fatigue and creep-fatigue damages in Ti-6Al-4V alloy
8. A review of dwell sensitive fatigue in titanium alloys: The role of microstructure, texture and operating conditions10.1016/S0142-1123(03)00145-2 ↗
9. Mechanical and texture evaluations of Ti 6246 as a dwell fatigue tolerant alloy
10. On the mechanisms of fatigue facet nucleation in titanium alloys10.1111/j.1460-2695.2008.01284.x ↗
11. Dwell and normal cyclic fatigue behaviours of Ti60 alloy10.1016/j.jmst.2013.10.010 ↗
12. On cold dwell facet fatigue in titanium alloy aero-engine components10.1016/j.ijfatigue.2016.11.034 ↗
13. Crystal plasticity, fatigue crack initiation and fatigue performance of advanced titanium alloys10.1016/j.ijfatigue.2006.12.011 ↗
14. On the formation of adiabatic shear bands in textured HCP polycrystals10.1016/j.ijplas.2015.12.004 ↗
15. The role of microtexture on the faceted fracture morphology in Ti-6Al-4V subjected to high-cycle fatigue10.1016/j.actamat.2010.03.036 ↗
16. Local texture and fatigue crack initiation in a Ti-6Al-4V titanium alloy10.1046/j.1460-2695.2002.00480.x ↗
17. Influence of microtexture on early plastic slip activity in Ti-6Al-4V polycrystals10.1007/s11661-018-4569-4 ↗
18. Fatigue crack initiation in as forged Ti-6Al-4V bars with macrozones present10.1016/j.ijfatigue.2015.05.020 ↗
19. A simple model to account for the role of microtexture on fatigue and dwell fatigue lifetimes of titanium alloys10.1016/j.scriptamat.2013.10.024 ↗
20. Impact of texture on mechanical properties in an advanced titanium alloy10.1016/S0921-5093(00)02034-7 ↗
21. Effect of microtexture on fatigue cracking in Ti-6Al-4V10.1016/j.actamat.2007.06.034 ↗
22. Evolution of lattice strain in Ti-6Al-4V during tensile loading at room temperature10.1016/j.actamat.2008.08.030 ↗
23. Measuring stress distributions in Ti-6Al-4V using synchrotron X-ray diffraction10.1007/s11661-008-9639-6 ↗
24. Direct measurement of critical resolved shear stress of prismatic and basal slip in polycrystalline Ti using high energy X-ray diffraction microscopy10.1016/j.actamat.2017.05.015 ↗
25. Cold creep of titanium: Analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations
26. Study of residual stresses in Ti-7Al using theory and experiments10.1016/j.jmps.2017.08.008 ↗
27. Determining the strengths of HCP slip systems using harmonic analyses of lattice strain distributions10.1016/j.actamat.2017.10.032 ↗
28. A methodology to determine the elastic moduli of crystals by matching experimental and simulated lattice strain pole figures using discrete harmonics10.1016/j.actamat.2016.12.026 ↗
29. 2021
30. Texture analysis with MTEX – free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
31. The effect of grain orientation on fracture morphology during the high cycle fatigue of Ti-6Al-4V10.1016/j.actamat.2009.04.018 ↗
32. 2021
33. Far-field high-energy diffraction microscopy: A tool for intergranular orientation and strain analysis10.1177/0309324711405761 ↗
34. A semi-quantitative explanation of the cold dwell effect in titanium alloys10.1016/j.matdes.2020.108909 ↗
35. Determination of residual stress in a microtextured α titanium component using high-energy synchrotron X-rays10.1177/0309324716640419 ↗
36. Accident to the AIRBUS A380-861 equipped with engine alliance GP7270 engines registered F-HPJE operated by air France on 30 september 2017 in cruise over greenland (Denmark)
37. Microscopic strain localisation in Ti-6Al-4V during uniaxial tensile loading10.1016/j.msea.2016.10.099 ↗
38. On the localization of plastic strain in microtextured regions of Ti-6Al-4V
39. Microstructural effects on strain rate and dwell sensitivity in dual-phase titanium alloys
40. Early stages of microstructure and texture evolution during beta annealing of Ti-6Al-4V10.1007/s11661-017-4444-8 ↗
41. On the role of the beta phase on slip activity in Ti-6Al-4V single colonies
42. A 3D analysis of the onset of slip activity in relation to the degree of micro-texture in Ti–6Al–4V10.1016/j.actamat.2019.09.028 ↗
43. Analysis of deformation mechanisms operating under fatigue and dwell-fatigue loadings in an α/β titanium alloy
44. The mechanistic link between macrozones and dwell fatigue in titanium alloys
45. The influence of the cross-section shape of specimens on strength characteristics under conditions of inhomogeneous flow10.1016/0956-716X(92)90508-C ↗
46. Effect of cross-sectional shape of specimen on fatigue strength under plane bending.10.1299/kikaia.62.607 ↗
47. Low temperature creep of Ti-6 Al-4 V10.1007/BF02644335 ↗
48. Size effect on the fatigue behaviour of IMI 829 titanium alloy under dwell conditions10.1016/0142-1123(89)90002-9 ↗