journal article·2022-01Open access

Large-strain Lüders-type deformation of B19' martensite in Ni47Ti49Nb2Fe2 alloy

Yuxuan Chen, Yinong Liu, Ang Li, Zhiyuan Ma, Hui Zhang, Daqiang Jiang, Yang Ren, Lishan Cui

Abstract

Abstract In this study, a Luders-type deformation with ∼40% strain of B19' martensite phase was observed in a Ni47Ti49Nb2Fe2 alloy at −50 °C. Such phenomenon was attributed to the nearly equal critical stresses of both dislocation slip and twinning, which result in the two deformation mechanisms co-operate concurrently. The large-strain Luders-type deformation disappeared when the deformation temperature was away from −50 °C. This was probably due to the different temperature dependence of the critical stresses of dislocation slip and twinning. Owing to the huge Luders-type deformation, the alloy exhibited a combination of high yield strength of 1105 MPa and large elongation of 55%, which was superb than those deformed at other temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Microscopic strain partitioning in Lüders band of an ultrafine-grained medium Mn steel10.1016/j.msea.2019.138050 ↗
2. Experimental measurement of the variables of Lüders deformation in hot-rolled steel via digital image correlation10.1016/j.msea.2020.139756 ↗
3. Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel10.1016/j.scriptamat.2018.09.007 ↗
4. Transition of tensile deformation behaviors in ultrafine-grained aluminum10.1016/j.actamat.2005.05.005 ↗
5. Lüders bands propagation of 1045 steel under multiaxial stress state10.1016/j.ijplas.2004.05.001 ↗
6. Yield point elongation due to twinning in a magnesium alloy10.1016/j.actamat.2011.11.022 ↗
7. Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes10.1016/j.scriptamat.2017.08.034 ↗
8. Grain-resolved analysis of localized deformation in nickel-titanium wire under tensile load10.1126/science.aad6700 ↗
9. Lüders-like deformation associated with martensite reorientation in NiTi10.1016/S1359-6462(98)00241-3 ↗
10. The deformation and ageing of mild steel: II Characteristics of the Lüders deformation10.1088/0370-1301/64/9/302 ↗
11. Underlying material response for Lüders-like instabilities10.1016/j.ijplas.2012.12.002 ↗
12. Ultrafine also can be ductile: on the essence of Lüders band elongation in ultrafine-grained medium manganese steel10.1016/j.msea.2018.07.052 ↗
13. High dislocation density-induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
14. Recoverability of large strains and deformation twinning in martensite during tensile deformation of NiTi shape memory alloy polycrystals10.1016/j.actamat.2019.09.012 ↗
15. Beyond the strain recoverability of martensitic transformation in NiTi10.1016/j.ijplas.2019.01.007 ↗
16. On the origin of Lüders-like deformation of NiTi shape memory alloys10.1016/j.jmps.2005.03.005 ↗
17. Physical metallurgy of Ti-Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
18. Deformation mechanism of martensite in Ti-rich Ti-Ni shape memory alloy thin films10.1016/j.actamat.2005.10.046 ↗
19. Deformation twinning in martensite affecting functional behavior of NiTi shape memory alloys10.1016/j.mtla.2019.100506 ↗
20. Plastic deformation of B2-NiTi–is it slip or twinning?10.1080/09500839.2017.1316019 ↗
21. Transformation twinning and deformation twinning of NiTi shape memory alloy10.1016/j.msea.2016.02.066 ↗
22. Micromechanical quantification of elastic, twinning, and slip strain partitioning exhibited by polycrystalline, monoclinic nickel-titanium during large uniaxial deformations measured via in-situ neutron diffraction10.1016/j.jmps.2013.05.008 ↗
23. Energetics of twinning in martensitic NiTi10.1016/j.actamat.2011.05.063 ↗
24. Higher order twin modes in martensitic NiTi-The (201̄) case10.1016/j.msea.2012.08.022 ↗
25. New deformation twinning mode of B19′ martensite in Ti-Ni shape memory alloy10.1016/S1359-6462(98)00366-2 ↗
26. Effects of Nb addition on the microsctruture of Ti-Ni alloys10.2320/matertrans1989.33.337 ↗
27. A transforming metal nanocomposite with large elastic strain, low modulus, and high strength10.1126/science.1228602 ↗
28. The microstructure and linear superelasticity of cold-drawn TiNi alloy10.1016/S0921-5093(99)00632-2 ↗
29. Lüders-like deformation associated with stress-induced martensitic transformation in NiTi10.1016/j.scriptamat.2003.09.018 ↗
30. Energetics of twinning in martensitic NiTi10.1016/j.actamat.2011.05.063 ↗
31. Independent slip systems in crystals10.1080/14786436308213843 ↗
32. The crystallography of the martensitic transformation in equiatomic nickel-titanium10.1016/0001-6160(81)90091-2 ↗
33. Dislocation-twin interaction mechanisms for ultrahigh strength and ductility in nanotwinned metals10.1016/j.actamat.2009.06.015 ↗
34. Atomistic energetics and critical twinning stress prediction in face and body centered cubic metals: recent progress10.1115/1.4038673 ↗
35. Twinning stress prediction in bcc metals and alloys10.1080/09500839.2014.955547 ↗
36. Twinning stress in shape memory alloys: theory and experiments10.1016/j.actamat.2013.07.053 ↗
37. Predicting twinning stress in fcc metals: linking twin-energy pathways to twin nucleation10.1016/j.actamat.2007.08.042 ↗
38. On the nature of the yield point phenomenon10.1016/j.actamat.2012.12.003 ↗
39. Nucleation and growth of deformation twins: a perspective based on the double-cross-slip mechanism of deformation twinning
40. Dislocation networks and the microstructural origin of strain hardening10.1103/PhysRevLett.121.085501 ↗
41. Dislocation mean free paths and strain hardening of crystals10.1126/science.1156101 ↗
42. Microstructural evolution and strain-hardening in TWIP Ti alloys10.1016/j.actamat.2019.11.009 ↗
43. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
44. Understanding the complete loss of uniform plastic deformation of some ultrafine-grained metallic materials in tensile straining10.1016/j.ijplas.2018.10.002 ↗