Recrystallization and structure-property correlation in V–Ti–Ta alloys
Source abstract
Abstract
Abstract The deformation and recrystallization behaviour with associated microstructural and textural evolutions, precipitation formation and dissolution behaviour, and structure-property correlations have been investigated in V–Ti–Ta alloy system. Recrystallization temperature in this system was found to be in the range of 1250–1300 °C, 200 °C higher than reference V–4Ti–4Cr alloy. Substitutional solid solution strengthening by Ta was found to be the dominant strengthening mechanism. In addition, Ta was also found to influence the precipitation behaviour of V–Ti–Ta alloys. Synchrotron XRD and TEM-EDS results indicated the composition of precipitate to be (Ti,Ta)CON in contrast to V–Ti–Cr system where no Cr is found in the precipitates. Theoretical calculations based on thermodynamics and experimental evidence are presented which indicate desirable enhanced precipitate stability in this system due to presence of Ta. Deformation texture of the alloy was found to exhibit prominent θ-fibre, whereas the recrystallized texture had shown predominant γ-fibre texture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Low activation structural materials for fusion10.1016/0920-3796(89)90021-5 ↗
2. Nuclear data needs for “low-activation” fusion materials development10.1016/0920-3796(90)90103-D ↗
3. R.L. Klueh, A.C.E.-o.N technology applications A.S.f.T. Materials, Reduced Activation Materials for Fusion Reactors, ASTM1990.10.1520/STP1047-EB ↗
4. Experimental investigation of radioactivities induced in fusion reactor structural materials by 14-MeV neutrons10.1016/S0920-3796(00)00195-2 ↗
5. Smith · 2000 · 1209
6. Atomically resolved chemical ordering at the nm-thick TiO precipitate/matrix interface in V-4Ti-4Cr alloy10.1016/j.scriptamat.2016.08.016 ↗
7. Development and testing of vanadium alloys for fusion applications10.1016/S0022-3115(96)00676-9 ↗
8. Mechanical properties of vanadium based alloys for fusion reactor10.1016/S0022-3115(96)00467-9 ↗
9. Research and development on vanadium alloys for fusion applications10.1016/S0022-3115(98)00269-4 ↗
10. Overview of the vanadium alloy researches for fusion reactors10.1016/j.jnucmat.2011.02.015 ↗
11. Void swelling behavior in ion-irradiated vanadium alloys10.1016/S0022-3115(96)00419-9 ↗
12. Irradiation hardening of V–4Cr–4Ti1This work was carried out in the framework of the European Fusion Technology Programme with financial support from the European Commission and The Netherlands Ministry of Economic Affairs.110.1016/S0022-3115(98)00704-1 ↗
13. Swelling of pure vanadium and V-5Cr at ~430 °C in response to variations in neutron flux-spectra in FFTF10.1016/j.jnucmat.2010.12.072 ↗
14. Liquid metal compatibility issues for test blanket modules10.1016/j.fusengdes.2005.07.010 ↗
15. Borovitskaya · Inorg. Mat. Appl. Res. · 2015 · 6 · 13310.1134/S2075113315020148 ↗
16. Agency · 2012
17. Development of structural and steam generator materials for sodium cooled fast reactors10.1016/j.egypro.2011.06.032 ↗
18. Making vanadium-based radiation-resistant alloys for fast-neutron reactor pin sheaths10.1007/s11041-009-9149-1 ↗
19. L Mannan · 2003
20. Vanadium alloys vs stainless steel for sodium-cooled fast reactor cladding
21. Mechanical properties of vanadium and vanadium-base alloys10.1179/095066080790136244 ↗
22. Present status of vanadium alloys for fusion applications10.1016/j.jnucmat.2014.06.025 ↗
23. Modelling materials for fusion power10.1179/1743280410Y.0000000006 ↗
24. Materials to deliver the promise of fusion power – progress and challenges10.1016/j.jnucmat.2004.04.141 ↗
25. Vanadium-base alloys for fusion first-wall/blanket applications10.1016/S0263-4368(00)00037-8 ↗
26. Effect of precipitates on high-temperature strength and irradiation behavior of vanadium-based alloys10.1007/s42243-018-0167-3 ↗
27. Recent progress on development of vanadium alloys for fusion10.1016/j.jnucmat.2004.04.299 ↗
28. R.L. Klueh, M. Okada, N.H. Packan, Reduced Activation Materials for Fusion Reactors, (1047).
29. Structural materials for fusion reactors10.1088/0029-5515/41/8/308 ↗
30. Effect of Ti addition on microstructural evolution of V–Cr–Ti alloys to balance irradiation hardening with swelling suppression10.1016/j.nme.2018.03.008 ↗
31. Monolayer-thick TiO precipitation in V-4Cr-4Ti alloy induced by proton irradiation10.1016/j.scriptamat.2016.12.002 ↗
32. Alloying and impurity effects in vanadium-base alloys10.1016/0022-3115(86)90152-2 ↗
33. Precipitation behavior in V–6W–4Ti, V–4Ti and V–4Cr–4Ti alloys10.1016/j.jnucmat.2004.05.019 ↗
34. The development of advanced vanadium alloys for fusion applications10.1016/j.jnucmat.2004.04.080 ↗
35. The hydrogen-induced ductility loss and strengthening of V-base alloys10.1016/j.jnucmat.2004.05.013 ↗
36. Stability of oxide particles under electron irradiation in a 9Cr ODS steel at 400 °C10.1016/j.jnucmat.2014.09.011 ↗
37. Analysis of flow behaviour of iron and steel using power law models10.1080/02670836.2016.1246697 ↗
38. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
39. The formation of precipitates and its effect on grain structure in V-4Cr-4Ti alloys with yttrium addition10.1016/j.jallcom.2016.10.112 ↗
40. A quasi-in-situ EBSD observation of the transformation from rolling texture to recrystallization texture in V-4Cr-4Ti alloy10.1016/j.matchar.2017.01.037 ↗
41. Examination of fabrication process parameters for improvement of low-activation vanadium alloys10.1016/S0920-3796(02)00258-2 ↗
42. Vanadium alloys – overview and recent results10.1016/S0022-3115(02)01253-9 ↗
43. French investigation of a new V–4Cr–4Ti grade: CEA-J57 – fabrication and microstructure10.1016/j.jnucmat.2012.03.029 ↗
44. Recrystallization and precipitation behavior of low-activation V–Cr–Ti alloys after cold rolling10.1016/j.jnucmat.2003.10.012 ↗
45. Effect of precipitation and solution behavior of impurities on mechanical properties of low activation vanadium alloy10.1016/j.jnucmat.2004.04.072 ↗
46. Improvement of vanadium alloys by precipitate control for structural components of fusion reactors10.4028/www.scientific.net/MSF.475-479.1449 ↗
47. The effect of final heat treatment temperature on radiation response of V–4Cr–4Ti10.1016/j.jnucmat.2010.12.075 ↗
48. Fracture properties of high-purity V–4Cr–4Ti alloy (NIFS-HEAT-2) at room temperature10.1016/S0022-3115(02)01039-5 ↗
49. Toloczko · 2004
50. Texture formation in metal alloys with cubic crystal structures10.1080/02670836.2016.1231746 ↗
51. Rolling and annealing textures of BCC metals10.4028/www.scientific.net/MSF.157-162.597 ↗
52. Effect of skin pass rolling reduction rate on the texture evolution of a non-oriented electrical steel after inclined cold rolling10.1016/j.jmmm.2017.01.020 ↗
53. Influence of the angle between cold rolling direction and hot rolling direction on the texture evolution of non-oriented electrical steels10.1088/1757-899X/82/1/012091 ↗
54. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
55. Thermo-Calc and DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗