journal article·2021-01Open access

Fatigue limit and microstructure in lamellar graphite iron

Vasilios Fourlakidis, Pål Schmidt, Anders E.W. Jarfors, Peter Svidro, Attila Dioszegi

Abstract

Demanding environmental legislation and improve performance specifications requires increasing fatigue strength for the engine components that are made of lamellar graphite iron (LGI). Components design, metallurgy and casting conditions define the microstructure formation and mechanical properties. The graphite inclusions embedded in the metallic matrix acting as defects and have a detrimental effect on the fatigue strength of LGI. The cooling conditions determine the coarseness of the microstructure and also have, a great impact on the fatigue resistance. The experimental material was an LGI alloy produced with three different solidification times. A fully reversed fatigue test was performed, and various microstructure features were quantitatively estimated by utilizing the Gumbel's statistics of extremes. The stereological parameter of Hydraulic Diameter of the Inter-dendritic Phase and the graphite Feret size found to be the most suitable microstructure parameters to be correlated with the fatigue limit. The results also indicate the sizeable effect of the solidification time on the fatigue limit. Several other microstructure features that have been reported to influence the tensile strength were also found to be related to the fatigue limit. The obtained endurance ratio ranges from 0.25 to 0.30, a value that is in line with previous investigations.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Graphite, nuclear technology, radiation studies · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Thermo-mechanical fatigue of grey cast iron for cylinder heads - effect of niobium, molybdenum and solidification time10.4028/www.scientific.net/MSF.925.377 ↗
2. A generic model to predict the ultimate tensile strength in pearlitic lamellar graphite iron10.1016/j.msea.2014.08.061 ↗
3. ISO 185:2005 Grey Cast Irons - Classification.
4. A fatigue and fracture study on high strength cast irons10.4028/www.scientific.net/MSF.925.296 ↗
5. Stress/strain behaviour and fatigue limit of grey cast iron10.1016/j.msea.2005.08.200 ↗
6. Fatigue crack initiation and growth in gray cast iron
7. Study on fatigue design method of an engine component produced by flake graphite cast iron for different loading modes and mean stresses10.1007/s40962-017-0206-z ↗
8. Effect of graphite morphology on tensile properties of flake graphite cast iron10.2320/matertrans.42.1428 ↗
9. Application of quantitative image analysis of graphite structures for the fatigue strength estimation of cast iron materials10.1016/j.proeng.2010.03.139 ↗
10. Microstructure and mechanical properties of pearlitic gray cast iron10.1016/j.msea.2007.11.070 ↗
11. Modeling microstructure development in gray cast irons10.1007/BF02652281 ↗
12. The fracture resistance of flake graphite cast iron10.1016/0141-5530(78)90003-1 ↗
13. Prediction of room temperature microstructure and mechanical properties in lamellar iron castings
14. Unambiguous classification of complex microstructures by their three-dimensional parameters applied to graphite in cast iron10.1016/j.actamat.2007.12.033 ↗
15. Austenite dendrite morphology in lamellar cast iron10.1179/1743133615Y.0000000018 ↗
16. Dynamic coarsening of austenite dendrite in lamellar cast iron Part 2 - the influence of carbon composition10.4028/www.scientific.net/MSF.790-791.211 ↗
17. SS-ISO 12107 · 2012
18. Microstructure-sensitive extreme value probabilities for high cycle fatigue of Ni-base superalloy IN10010.1016/j.ijplas.2009.08.001 ↗
19. Effects of small defects and nonmetallic inclusions on the fatigue strength of metals10.1299/jsmea1988.32.2_167 ↗
20. Guesser · 2004
21. Elfsberg J., König M., Skuglund P., Wilberfors F., Properties and Microstructure of Sand Cast Lamellar Graphite Iron – Influence of Alloying, Inoculation and Solidification Rate, Oral presentation by Elfsberg at EuroMat 2019, Stockholm.