journal article·2021-01

Step-by-step texture modification through strain path change toward improvement of the hardening capacity in a twinning-induced-plasticity steel

SH. Akbarian, A. Zarei-Hanzaki, A.S. Anoushe, H.R. Abedi, R. Unnikrishnan, G. Cios

Publisher page

Abstract

Abstract A novel texture analysis approach is aimed to elucidate the role of strain path change in extending the superior strain hardening capacity of a twinning-induced-plasticity steel up to the large compressive imposed strains at room temperature, in lights of step-by-step texture modification. In this context, activation of different deformation mechanisms during multi-axial forging (MAF) process is fully studied using macrotexture and microtexture analyses by means of calculating Schmid factors of slip and twinning. Synergetic development of deformation twin and dislocation substructure throughout the 1st MAF pass leads to exponential strain hardening rate. This is correlated with the formation of texture components with twin-favoring (near to ) and slip-favoring (near to and ) orientations in each compression of one MAF pass. Such cooperation can also be reached for larger imposed strains during the 2nd MAF pass at ∑Ԑ = 2.4. However, it results in a steady-state flow behavior through continuous dynamic recrystallization stemming from turning dislocation cells of slip-favoring grains into the new ultrafine grains. This is phenomenal as can be understandable by recognizing the orientation dependency of dislocation substructures including Taylor lattice and dislocation cells as representatives for deformation twins and cross-slip, respectively. Having grains with dislocation cell and Taylor lattice respectively is the origin of facilitating restoration-based process and twinning activation, which modifies the texture by developing a twofold configuration in the course of imposing strain path change. As the second phase of this study, a detailed analyzation of subsequent mechanical responses of MAFed materials is focused through the room-temperature tensile and compression testing methods with the emphasis on the effect of pre-test microtexture on asymmetrical behavior. The shear-punch test is also used to prove the positive effect of recrystallized grains to enhance the mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Role of grain size on deformation microstructures and stretch-flangeability of TWIP steel10.1016/j.msea.2019.138861 ↗
2. Low formability and reduction of area in twinning-induced plasticity steels despite their excellent tensile elongation10.1016/j.msea.2020.139123 ↗
3. Deformation behaviors of various Fe–Mn–C twinning-induced plasticity steels: effect of stacking fault energy and chemical composition10.1007/s10853-019-04018-1 ↗
4. Fracture behavior of twinning-induced plasticity steel during wire drawing10.1016/j.jmrt.2020.02.080 ↗
5. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
6. Deformation behavior of a high-plasticity nano/ultrafine-grained N-bearing duplex stainless steel: twin/twin-like induced plasticity effect10.1016/j.msea.2017.06.040 ↗
7. Microstructure evolution and strengthening mechanisms of Fe-23Mn-0.3C-1.5Al TWIP steel during cold rolling10.1016/j.msea.2014.08.051 ↗
8. Microstructure and texture evolution of a high manganese TWIP steel during cryo-rolling10.1016/j.matchar.2017.07.043 ↗
9. Outstanding tensile properties and their origins in twinning-induced plasticity (TWIP) steels with gradient substructures10.3390/ma13051184 ↗
10. Crystal plasticity finite element analysis of gradient nanostructured TWIP steel10.1016/j.ijplas.2020.102703 ↗
11. Influence of nanotwins on hydrogen embrittlement of TWIP (twinning-induced plasticity) steel processed by high-pressure torsion10.1016/j.msea.2020.139273 ↗
12. Softening behavior of a cold rolled high-Mn twinning-induced plasticity steel10.1007/s11665-015-1658-z ↗
13. Structural and phase transformation in a TWIP steel subjected to high pressure torsion10.1016/j.matlet.2015.12.095 ↗
14. Equal channel angular pressing of a TWIP steel: microstructure and mechanical response
15. Processing a twinning-induced plasticity steel by high-pressure torsion10.1016/j.scriptamat.2012.07.019 ↗
16. On the capability of severe plastic deformation of twining induced plasticity (TWIP) steel10.1016/j.matdes.2011.11.055 ↗
17. Deformation characteristics of nanocrystalline TWIP steel under uniaxial tension and compression10.1016/j.mechmat.2019.103147 ↗
18. Dependence of deformation twinning on grain orientation in a high manganese steel10.1016/j.scriptamat.2006.06.004 ↗
19. Cold rolling behaviour of an austenitic Fe-30Mn-3Al-3Si TWIP-steel: the importance of deformation twinning10.1016/j.actamat.2003.12.040 ↗
20. Influence of cold rolling on microstructure, texture and mechanical properties of low carbon high Mn TWIP steel10.1016/j.msea.2014.07.088 ↗
21. Applying the texture analysis for optimizing thermomechanical treatment of high manganese twinning-induced plasticity steel10.1016/j.actamat.2014.07.068 ↗
22. On the microstructure evolution during isothermal low cycle fatigue of β-annealed Ti-6242S titanium alloy: internal damage mechanism, substructure development and early globularization10.1016/j.ijfatigue.2018.07.014 ↗
23. Substructure development and deformation twinning stimulation through regulating the processing path during multi-axial forging of twinning induced plasticity steel10.1002/adem.201800453 ↗
24. Effect of stress states on twinning behavior in twinning-induced plasticity steel10.1007/s11665-019-04254-1 ↗
25. Deformation of single crystal hadfield steel by twinning and slip10.1016/S1359-6454(99)00383-3 ↗
26. The effect of grain size and grain orientation on deformation twinning in a Fe-22wt.% Mn-0.6wt.% C TWIP steel10.1016/j.msea.2010.02.041 ↗
27. Study of deformation twinning and planar slip in a TWIP steel by electron channeling contrast imaging in a SEM10.4028/www.scientific.net/MSF.702-703.523 ↗
28. Substructure induced twinning in low density steel, Scripta
29. Dependence of deformation twinning on grain orientation in compressed high manganese steels10.1016/j.scriptamat.2007.02.028 ↗
30. Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe-Mn-Al-C steel10.1016/j.actamat.2012.07.018 ↗
31. Intragranular brittle precipitates improve strain hardening capability of Fe–30Mn–11Al–1.2C low-density steel10.1016/j.msea.2020.138984 ↗
32. Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in twinning induced plasticity (TWIP) steel10.1016/j.msea.2016.12.037 ↗
33. Stress-relaxation viewpoint to study the room-temperature cyclic deformation behavior of a low-density steel10.1016/j.ijfatigue.2020.105673 ↗
34. Reversible dislocation movement, martensitic transformation and nano-twinning during elastic cyclic loading of a metastable high entropy alloy10.1016/j.actamat.2019.12.040 ↗
35. On the molecular dynamics simulation of fatigue behavior of pre-cracked aluminum chip for NEMS application: effect of cyclic loading mode and surface roughness geometry10.1016/j.ijfatigue.2020.105570 ↗
36. High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - application10.1016/S0749-6419(00)00015-2 ↗
37. On machining of hardened AISI D2 steel with PCBN tools10.1016/j.jmatprotec.2005.06.079 ↗
38. Micro and macro texture evolution during multiaxial forging of a WE43 magnesium alloy10.1016/j.jallcom.2017.12.181 ↗
39. Orientation imaging microscopy: emerging and future applications10.1016/S0304-3991(96)00103-9 ↗
40. Orientation imaging: the emergence of a new microscopy10.1007/BF02656503 ↗
41. Texture analysis with MTEX- Free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
42. Discretization techniques for orientation distribution functions10.1155/TSM.19.229 ↗
43. Shear punching of a Ti-based bulk metallic glass10.1016/j.msea.2012.11.022 ↗
44. Ringer · 2016
45. Effect of initial grain size on the microstructure and mechanical properties of high-pressure torsion processed twinning-induced plasticity steels10.1016/j.msea.2016.11.050 ↗
46. Superior strength and multiple strengthening mechanisms in nanocrystalline TWIP steel
47. Microstructure and texture evolution during cold rolling and annealing of a high Mn TWIP steel10.1016/j.actamat.2008.11.036 ↗
48. Effect of austenite pancaking on texture formation in a plain carbon and A Nb microalloyed steel10.1016/0956-7151(94)90428-6 ↗
49. Analysis of the microstructure evolution during tensile testing at room temperature of high-manganese austenitic steel10.1016/j.matchar.2009.11.013 ↗
50. On Brass-type shear bands and their influence on texture formation Brass-type shear bands and their influence on texture formation10.1007/s11661-004-0283-5 ↗
51. Correlation of defect density with texture evolution during cold rolling of a twinning-induced plasticity (TWIP) steel10.1016/j.msea.2017.11.009 ↗
52. Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure, Scripta
53. Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions10.1016/j.msea.2008.09.031 ↗
54. Shear texture gradient in AA6061 aluminum alloy processed by accumulative roll bonding with high roll roughness10.1016/j.jallcom.2014.01.125 ↗
55. Dislocation and twin substructure evolution during strain hardening of an Fe-22 wt.% Mn-0.6 wt.% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
56. Substructure hardening in duplex low density steel10.1016/j.matdes.2016.12.020 ↗
57. The microstructure evolution and room temperature deformation behavior of ferrite-based lightweight steel10.1016/j.msea.2016.04.017 ↗
58. Dynamic restoration of the ferrite and austenite phases during hot compressive deformation of a lean duplex stainless steel10.1016/j.msea.2020.139400 ↗
59. Microstructural evolution and texture analysis in a thermomechanically processed low SFE super-austenitic steel (alloy-28)10.1002/adem.201700928 ↗
60. Cold rolling behaviour of an austenitic Fe-30Mn-3Al-3Si TWIP-steel : the importance of deformation twinning
61. On the relation of microstructure and texture evolution in an austenitic Fe-28Mn-0.28C TWIP steel during cold rolling10.1007/s11661-012-1543-4 ↗
62. Characterization of twin-like structure in a ferrite-based lightweight steel10.1007/s12540-016-6113-7 ↗
63. Strong cube recrystallization texture in silicon steel by twin-roll casting process10.1016/j.actamat.2014.05.020 ↗
64. Textures of strip cast and hot rolled ferritic and austenitic stainless steel10.1179/mst.1995.11.5.461 ↗
65. Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc Alloys that form deformation twins10.1007/s11661-997-0109-3 ↗
66. Stress-strain response and microstructural evolution of a FeMnCAl TWIP steel during tension-compression tests10.1016/j.msea.2016.01.004 ↗
67. Springback prediction of TWIP automotive sheets10.1007/s12540-009-0637-z ↗
68. Tension-compression asymmetry of additively manufactured maraging steel10.1016/j.jmapro.2018.08.015 ↗
69. Double-hit compression behavior of TWIP steels10.1016/j.msea.2011.09.080 ↗
70. Effects of recrystallization annealing temperature on carbide precipitation, microstructure, and mechanical properties in Fe-18Mn-0.6C-1.5Al TWIP steel10.1016/j.msea.2009.08.048 ↗
71. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
72. Accumulative roll bonding (ARB)-processed high-manganese twinning induced plasticity (TWIP) steel with extraordinary strength and reasonable ductility10.1016/j.msea.2018.10.119 ↗
73. Identification of material parameters of a shear modified GTN damage model by small punch test10.1007/s10704-020-00428-4 ↗
74. The influence of microstructure on the ductile to brittle transition and fracture behaviour of HVOF NiCoCrAlY coatings determined via small punch tensile testing10.1016/j.msea.2019.03.108 ↗
75. Assessment of tensile properties of spot welds using shear punch test10.1016/j.msea.2012.12.068 ↗
76. Effect of anisotropic microstructure of a 12Cr-ODS steel on the fracture behaviour in the small punch test10.1016/j.msea.2015.12.055 ↗