journal article·2020-09

Comparison of high-temperature deformation behaviors for Ti–Al–Nb–V alloy with different initial microstructures at the strain of 0.7

Xuzhen Liu, Yanjun Hao, Jinxu Liu, Shukui Li, Qi Cai, Yanwei Lv

Publisher page

Abstract

Abstract The Ti–Al–Nb–V alloy with the Widmanstatten B2+α2 structure was prepared by induction skull melting, and it became single-B2-phase alloy with the equiaxed structure by further solution treatment and quenching. The compression properties and the deformation behaviors of the Ti–Al–Nb–V alloy with the two types of microstructures were investigated in the temperature range of 500–900 °C. When the alloy was loaded at 500–800 °C, the yield strength of the specimen with the equiaxed structure was higher than that of the one with the Widmanstatten structure, whereas the opposite trend was exhibited at 900 °C. For the specimen with the Widmanstatten structure, the flow softening occurred at 600–900 °C upon compression, and the initiating strain of the flow softening stage decreased with the increasing deformation temperature. For the specimen with the equiaxed structure, the flow softening occurred at 500–900 °C. By comparing the undeformed and deformed microstructures of the specimens at the strain of 0.7, it was concluded the deformation mechanism of the specimen with the Widmanstatten structure was dislocation glide below 600 °C, and above this temperature, dynamic recrystallization in the B2 phase became dominant. For the specimen with the equiaxed structure, the deformation mechanism was the dislocation glide that formed the slip bands at 500 °C, while recrystallization occurred in the slip bands at 600–900 °C, leading to the flow softening. When the deformation temperatures were 800 °C and 900 °C, the deformation mechanism also referred to the phase transformation of B2→α2. According to the detailed microstructure observations, the deformation mechanisms were schematically illustrated for the Ti–Al–Nb–V alloy with different initial structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Selective Laser Melting of Ti2AlNb-based intermetallic alloy using elemental powders: effect of process parameters and post-treatment on microstructure, composition, and properties10.1016/j.intermet.2019.106554 ↗
2. Effect of composition on the mechanical properties of newly developed Ti2AlNb-based titanium aluminide10.1016/j.intermet.2004.12.003 ↗
3. Microstructure and deformation of two-phase γ-titanium aluminides10.1016/S0927-796X(97)00018-1 ↗
4. Low cycle fatigue behaviour of Ti alloy Timetal 834 at 873K10.1016/j.ijfatigue.2006.09.006 ↗
5. Deformation behavior and microstructural evolution of directionally solidified TiAlNb-based alloy during thermo-compression at 1373–1573 K10.1016/j.matdes.2015.06.117 ↗
6. Precipitation behavior of Widmanstätten O phase associated with interface in aged Ti2AlNb-based alloys10.1016/j.matchar.2018.09.009 ↗
7. Formation of fine B2/β + O structure and enhancement of hardness in the aged Ti2AlNb-based alloys prepared by spark plasma sintering10.1007/s11661-017-4193-8 ↗
8. Part I. The microstructural evolution in Ti-Al-Nb O+ Bcc orthorhombic alloys10.1007/s11661-999-0240-4 ↗
9. Part II. The creep behavior of Ti-Al-Nb O+ Bcc orthorhombic alloys10.1007/s11661-999-0244-0 ↗
10. Part III. The tensile behavior of Ti-Al-Nb O+ Bcc orthorhombic alloys10.1007/s11661-001-0010-4 ↗
11. Tensile properties and high temperature creep behavior of microalloyed Ti–Ti3Al–Nb alloys by directional solidification10.1016/j.msea.2010.03.096 ↗
12. Microstructure and tensile properties of orthorhombic Ti-Al-Nb-Ta alloys10.1016/S0966-9795(99)00151-X ↗
13. In situ tensile deformation and fracture behavior of Ti-24Al-14Nb-3V-0.5Mo alloy with various microstructures10.1016/j.intermet.2003.07.007 ↗
14. Microstructure and mechanical properties of a Ti−22Al−25Nb alloy fabricated from elemental powders by mechanical alloying and spark plasma sintering10.1016/j.jallcom.2017.01.354 ↗
15. Creep behavior of Ti-40Al-10Nb titanium aluminide intermetallic alloy10.1016/j.msea.2006.07.132 ↗
16. Formation of deformation twins in a crept lamellar TiAl alloy10.1016/S1359-6462(98)00256-5 ↗
17. Plastic deformation of single crystals of Ti3Al with D019 structure10.1080/01418619108213939 ↗
18. The influence of temperature and alloying additions on the mechanisms of plastic deformation of Ti3Al10.1080/01418619008235561 ↗
19. Discontinuous yielding and microstructural evolution of Ti-40 at.% Al alloy compressed in single α-hcp phase region10.1016/j.jallcom.2016.10.080 ↗
20. Ordered domains in TiAl coexisting with Ti3Al in the lamellar structure of Ti-rich TiAl compounds10.1080/01418619208201574 ↗
21. Deformation of lamellar structure in TiAl-Ti3Al two-phase alloys10.1080/014186198253660 ↗
22. Microstructural evolution and tensile behavior of Ti2AlNb alloys based α2-phase decomposition10.1016/j.msea.2016.03.058 ↗
23. Microscopic observation of superplastic deformation in α2-phase Ti3Al–Nb alloy10.1016/S0921-5093(99)00141-0 ↗
24. Deformation behavior of Ti2AlNb-based alloy during dynamic compression10.1002/adem.201800281 ↗
25. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
26. Dislocation damping at high temperatures10.1063/1.1722704 ↗
27. Effect of alloying additions on work hardening, dynamic recrystallization, and mechanical properties of Ti–44Al–5Nb–1Mo alloys during direct hot-pack rolling10.1016/j.msea.2019.138838 ↗
28. Meyers · 2008
29. Evolution of deformation mechanisms of Ti–22.4Nb–0.73Ta–2Zr–1.34O alloy during straining10.1016/j.actamat.2010.01.015 ↗
30. Super-elastic titanium alloy with unstable plastic deformation10.1063/1.2037192 ↗
31. The effect of alpha platelet thickness on plastic flow during hot working of TI–6Al–4V with a transformed microstructure10.1016/S1359-6454(01)00236-1 ↗
32. The yielding, deformation and fracture behavior for the Widmanstätten structure of Ti–8Al–1Mo–1V alloy upon high speed impact10.1016/j.jallcom.2019.151952 ↗
33. The phase evolution and microstructural stability of an orthorhombic Ti-23Al-27Nb alloy10.1007/s11669-999-0007-z ↗
34. Dislocation substructure in pure titanium fabricated by powder metallurgy with hot pressing at 1100 °C under a pressure of 20 MPa10.1023/A:1010939804095 ↗
35. Plastic deformation mechanism and interaction of B2, α2, and O phases in Ti-22Al-25Nb alloy at room temperature10.1016/j.ijplas.2018.09.004 ↗
36. TEM and HRTEM study of influence of thermal cycles with stress on dynamic recrystallization in Ti46Al8Nb1B during creep10.1016/j.micron.2007.11.013 ↗
37. Effect of grain size and partial disordering on ductility of Ti3Al in the temperature range of 20-600 °C10.1016/S1359-6454(99)00044-0 ↗
38. Microstructure, tensile, and creep behaviors of Ti-22Al-25Nb (at.%) orthorhombic alloy with equiaxed microstructure10.3390/ma11071244 ↗
39. Formation of slip bands and microstructure evolution of Ti-5Al-5Mo-5V-3Cr-0.5Fe alloy during warm deformation process10.1016/j.jallcom.2018.08.097 ↗
40. Impact of non-Schmid stress components present in the yield criterion for bcc metals on the activity of {110}⟨111⟩ slip systems10.1016/j.commatsci.2018.12.021 ↗
41. A brief history of dislocation theory10.1007/BF02670413 ↗
42. Kinetic dislocation model of microstructure evolution during severe plastic deformation10.1016/j.msea.2007.02.005 ↗
43. Effect of interstitial solutes on the strength and ductility of titanium10.1016/0079-6425(81)90001-3 ↗