journal article·2020-10

The existence and strengthening mechanism of phosphorus in Ni17Cr15Fe-based alloys

Chaochao Xue, Fang Liu, Xiaoyu Yao, Dongyan Liu, Xin Xin, Wenru Sun, Anwen Zhang, Sha Zhang

Publisher page

Abstract

Abstract In this paper, the existing form of phosphorus (P) and its strengthening mechanism in the simplified alloys Ni-17%Cr-15%Fe were investigated. Two different post heat treatments were applied on the as solutionized alloys in order to investigate the precipitates and their effects on the mechanical properties. For the water quenched alloys, no precipitated compounds were observed either at grain boundary or within grain, the rupture strength was enhanced, and the tensile fracture mode transformed from mixture of intergranular and transgranular fracture to single transgranular fracture, which indicated the segregation of P atoms along grain boundary strengthened grain boundary. For the water quenched alloys with additional further aging at 800 °C for 8 h and subsequent water quenching, P facilitated the precipitation of intragranular M23C6 carbide and thus the intragranular strength was effectively improved. The results of quantitative chemical element analysis and qualitative TEM/EDS analysis indicated that P enriched in intragranular M23C6 carbide. At the same time, the amount of intergranular M23C6 carbide increased with an increase in P content and its morphology transformed from short rod to granular particle gradually, resulting in the grain boundary precipitation strengthening. The findings of existing state and strengthening mechanism of phosphorus in Ni-17%Cr-15%Fe alloys are of critical importance, which will provide useful information for further interpreting the beneficial effect of P in Ni-based superalloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Segregation to interfaces10.1179/imr.1977.22.1.262 ↗
2. Temper embrittlement10.1179/095066078790136661 ↗
3. Effects of phosphorus impurity on the microstructure and impact toughness of weld joint for the 12Cr2Mo1R heat resistant steel10.1016/j.jmapro.2019.01.026 ↗
4. Sun · 1993 · 8
5. Effects of trace elements P, S and Si on the solidification process, element segregation, microstructure and mechanical properties of IN718 and GH761 alloys
6. Effect of phosphorus on the microstructure and stress rupture properties in a Fe-Ni-Cr base superalloy10.1007/s11661-997-0050-5 ↗
7. W. D. Cao, R. L. Kennedy. The effect of phosphorus on mechanical properties of alloy 718. Superalloys 718, 625, 706 and Various Derivatives 1994. TMS, Warrendale, PA, 1994, 463-477.10.7449/1994/Superalloys_1994_463_477 ↗
8. The effect of phosphorus on the microstructure and mechanical properties of ATI 718Plus alloy10.1016/j.msea.2014.12.094 ↗
9. Interfacial segregation and co-segregation behavior in a nickel-base alloy 71810.1016/S0921-5093(01)01491-5 ↗
10. Grain boundary segregation in a Ni-Fe-based (Alloy 718) superalloy10.1016/j.msea.2007.01.090 ↗
11. Effect of trace P on Fe-Ni based brought superalloy
12. A new method for strengthening wrought superalloys:micro-alloying with phosphorus and boron
13. Structural stability and mechanical properties of phosphorus modified Ni–Fe based superalloy GH984
14. Segregation of phosphorus and precipitation of MNP-type phosphide at the grain boundary of IN706 superalloy10.1016/j.jmst.2016.09.010 ↗
15. Effect of phosphorus on the stress rupture properties of IN706 superalloy
16. The role of phosphorus in a newly developed Ni-Fe-Cr-based wrought superalloy10.1016/j.msea.2016.03.069 ↗
17. Grain boundary decohesion by impurity segregation in a nickel-sulfur system10.1126/science.1104624 ↗
18. First-principles study of the effect of phosphorus on nickel grain boundary10.1063/1.4863181 ↗
19. Effects of phosphorus on the δ-Ni3Nb phase precipitation and the stress rupture properties in alloy 71810.1016/S0921-5093(97)00753-3 ↗
20. Effect of phosphorus on the grain boundary cohesion and γ′ precipitation in IN706 alloy10.1007/s11661-016-3495-6 ↗
21. Effect of cooling rate on phosphorus segregation behavior and the corresponding precipitation of γ′′and γ′ phases in IN718 alloy10.1016/j.jmst.2019.02.006 ↗
22. Re-recognition of the effects of phosphorus and boron on the γ′′and γ′ phases in IN718 alloy10.1007/s40195-018-0786-5 ↗
23. Distribution of phosphorus and its effects on precipitation behaviors and tensile properties of IN718C cast superalloy10.1007/s40195-018-0834-1 ↗
24. Effect of phosphorus content and grain size on the long-term phase stability of Ni-base superalloys10.1016/j.jallcom.2020.154352 ↗
25. Effect of the precipitation of the η-Ni3Al0.5Nb0.5 phase on the microstructure and mechanical properties of ATI 718Plus10.1016/j.jallcom.2017.01.145 ↗
26. Investigation of the abnormal effects of phosphorus on mechanical properties of INCONEL 718 superalloy10.1016/S0921-5093(99)00153-7 ↗
27. Effect of initial γ/γ′ microstructure on creep of single crystal nickel-based superalloys: a phase-field simulation incorporating dislocation dynamics10.1016/j.jallcom.2018.11.166 ↗
28. The coarsening behavior of γ′-Ni3(Ti, Al) phase in a precipitation strengthened Fe-based alloy10.1016/j.matchar.2019.03.036 ↗
29. Elements segregation and phase precipitation behavior at grain boundary in a Ni-Cr-W based superalloy10.1016/j.matchar.2016.11.002 ↗
30. First-principles study of grain boundary embrittlement in Fe–Ni–S alloy10.1016/j.commatsci.2011.11.023 ↗
31. Intermediate temperature embrittlement in high-purity Ni and binary Ni(Bi) alloy10.1016/j.scriptamat.2011.05.024 ↗
32. The effects of boron addition on the microstructure stability and mechanical properties of a Ni-Cr based superalloy10.1016/j.msea.2017.12.082 ↗
33. Adsorption-induced interface decohesion10.1016/0001-6160(80)90112-1 ↗
34. Correlating the five parameter grain boundary character distribution and the intergranular corrosion behaviour of a stainless steel using 3D orientation microscopy based on mechanical polishing serial sectioning10.1016/j.actamat.2018.06.044 ↗
35. Methods for making alloy 600 resistant to sensitization and intergranular corrosion10.1016/j.corsci.2012.12.021 ↗
36. A coupled dislocation dynamics-continuum barrier field model with application to irradiated materials10.1016/j.ijplas.2018.01.015 ↗
37. Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content10.1016/j.actamat.2017.10.040 ↗
38. Room temperature tensile behaviour of K640S Co-based superalloy10.1080/02670836.2019.1572298 ↗
39. Melting of primary carbides in a cobalt-base superalloy10.1016/j.jallcom.2019.02.041 ↗
40. Effect of temperature on tensile behavior of Ni–Cr–W based superalloy10.1016/j.msea.2010.11.053 ↗
41. Formation of M23C6-type precipitates and chromium-depleted zones in austenite stainless steel10.1016/j.scriptamat.2011.06.010 ↗
42. Harnessing atomistic simulations to quantify activation parameters for dislocation nucleation from a grain boundary in Nickel10.1016/j.physleta.2020.126501 ↗