journal article·2020-08Open access

Macro and micro mechanical in-situ characterization using synchrotron diffraction of architectured micro-composite duplex stainless steels

Hasan Naser, Frédéric De Geuser, Marc Mantel, Muriel Véron, Alexis Deschamps

Abstract

Abstract The mechanical behavior of micro-composites Duplex Stainless steels (DSS) produced by Accumulative re-Bundling and Drawing (ABD) has been investigated. We evidenced a systematic increase in the yield strength, as a function of the manufacturing step, independently from the phases' volume fraction. A simple rule of mixture (ROM) successfully predicted the first generation of composites presenting a simple microstructure. However, a modified ROM taking into account the contribution of each component and its grain size could not predict the mechanical response of the composites of higher generation. An in-depth analysis is conducted to investigate the microstructure-mechanical behavior relationship and to rationalize the resultant mechanical behavior from that of each constitutive phase. For this purpose, in-situ synchrotron High Energy X-ray Diffraction measurements during uniaxial tensile experiments have been carried out to calculate the strain partitioning within each phase of the composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. « Stainless steel in construction: a review of research, applications, challenges and opportunities »10.1016/j.jcsr.2008.07.011 ↗
2. « the physical metallurgy of duplex stainless steels »
3. « Plastic deformation of duplex stainless steels with different amounts of ferrite »
4. « the law of mixtures applied to the plastic deformation of two-phase Alloys of coarse microstructures »
5. « Stress and strain partition in elastic and plastic deformation of two phase alloys »10.1007/BF01184992 ↗
6. « Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model »10.1016/j.ijplas.2016.01.018 ↗
7. « Evolution of the residual stress state in a duplex stainless steel during loading »10.1016/S1359-6454(99)00149-4 ↗
8. « Effect of residual stresses on individual phase mechanical properties of austeno-ferritic duplex stainless steel »10.1016/j.actamat.2006.06.035 ↗
9. « Micromechanical behavior and texture evolution of duplex stainless steel studied by neutron diffraction and self-consistent modeling »10.1016/j.actamat.2007.10.040 ↗
10. « Interactions between the phase stress and the grain-orientation-dependent stress in duplex stainless steel during deformation »10.1016/j.actamat.2006.04.019 ↗
11. « Role of deformation twinning and second phase on the texture evolution in a duplex stainless steel during cold rolling: experimental and modelling study »10.1016/j.msea.2020.139155 ↗
12. « Micromechanics and microstructure evolution during in situ uniaxial tensile loading of TRIP-assisted duplex stainless steels »10.1016/j.msea.2018.07.040 ↗
13. « Deformation behavior of lean duplex stainless steels with strain induced martensitic transformation: role of deformation mechanisms, alloy chemistry and predeformation »10.1016/j.mtla.2018.100190 ↗
14. « effect of microstructural characteristics on mechanical properties of austenitic, ferritic, and γ-α duplex stainless steels »10.1007/s11661-018-5083-4 ↗
15. « A study on the micromechanical behaviors of duplex stainless steel under uniaxial tension using ex-situ experimentation and the crystal plasticity finite element method »10.1016/j.ijplas.2015.07.005 ↗
16. « Load partitioning between single bulk grains in a two-phase duplex stainless steel during tensile loading »10.1016/j.actamat.2009.09.053 ↗
17. « Load sharing of the phases in 1080 steel during low-cycle fatigue »10.1007/BF02660876 ↗
18. « In-situ measurement of local strain partitioning in a commercial dual-phase steel »10.3139/146.101526 ↗
19. « Phase analysis of steels by grain-averaged EBSD functions »10.2355/isijinternational.51.130 ↗
20. The effect of crystallographic orientation on the micromechanical deformation and failure behaviors of DP980 steel during uniaxial tension »10.1016/j.ijplas.2012.11.013 ↗
21. « the micromechanical deformation behaviors of hot-rolled 590FB steel during hole-expansion test »10.1016/j.ijplas.2013.11.010 ↗
22. « Damage and crack initiation behavior of duplex stainless steel during cyclic loading »10.4028/www.scientific.net/KEM.324-325.1117 ↗
23. « Design of a novel Mn-based 1GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability »10.1016/j.actamat.2011.04.011 ↗
24. « Architectured duplex stainless steels micro-composite: elaboration and microstructure characterization »10.1016/j.matdes.2018.02.069 ↗
25. « Synchrotron X-ray study of bulk lattice strains in externally loaded Cu-Mo composites »10.1007/BF02830344 ↗
26. « Mechanical properties of phases in austeno-ferritic duplex stainless steel—surface stresses studied by X-ray diffraction »10.1016/j.msea.2006.06.074 ↗
27. « Stress distribution correlated with damage in duplex stainless steel studied by synchrotron diffraction during plastic necking »10.1016/j.matdes.2016.10.014 ↗
28. « static tensile deformation behavior of a lean duplex stainless steel studied by in situ neutron diffraction and synchrotron radiation white X-rays »10.2355/isijinternational.53.1260 ↗
29. « Lattice strain measurements using synchrotron diffraction to calibrate a micromechanical modeling in a ferrite–cementite steel »10.1016/j.msea.2012.10.086 ↗
30. « Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel »10.1016/j.actamat.2006.11.004 ↗
31. « Recent developments in stainless steels »10.1016/j.mser.2009.03.001 ↗
32. « the deformation and ageing of mild steel: III discussion of results »10.1088/0370-1301/64/9/303 ↗
33. « the cleavage strength of polycrystals »
34. « the determination of a continuum mechanics equivalent elastic strain from the analysis of multiple diffraction peaks »10.1063/1.1794896 ↗
35. « Interphase and intergranular stress generation in composites exhibiting plasticity in both phases »10.1016/j.actamat.2005.02.041 ↗
36. « Self-consistent modelling of the plastic deformation of f.c.c. polycrystals and its implications for diffraction measurements of internal stresses »10.1016/S1359-6454(98)00014-7 ↗
37. « Elastoplastic deformation of ferritic steel and cementite studied by neutron diffraction and self-consistent modelling »10.1016/S1359-6454(02)00026-5 ↗
38. Noyan · 2013
39. « Micromechanical characterisation of TRIP-assisted multiphase steels by in situ neutron diffraction »10.1080/14786430500529359 ↗