journal article·2020-06

Investigation of the microstructures and mechanical properties of the Al–xSi–yAlNp composite by a diffusion method

Kaiqi Hu, Tong Gao, Qingfei Xu, Huabing Yang, Xia Ma, Jinfeng Nie, Xiangfa Liu

Publisher page

Abstract

Abstract In this work, a diffusion method was adopted to explore the microstructures and mechanical properties in response to the compositions of Al–xSi–yAlNp composite system. A gradient composite was prepared by an Al–8AlN master alloy and Al–12Si melt via diffusion reaction process. It was found that the obtained composite presents varying compositions of Si (from 12 wt% to zero) and AlN (from zero to 8 wt%) from edge to center. The whole material exhibits gradient grain sizes ranging from 34.6 to 14.3 μm and preferred orientations of α-Al grains, varying from Al to Al. It is verified that the diffusion rate of Si atoms and growth of α-Al grains were restricted by nano-AlNp, based on which different solidification modes were established to clarify the formation of the gradient composite. Compared with the Al–12Si alloy, the obtained Al–xSi–yAlNp composites with various Si and AlN contents exhibit improved microhardness, tensile strength and elongation. It is deduced that the nano-AlN particles play an important role in resisting deformation of α-Al grains and absorbing fracture energy. This work may provide references for in-situ designing gradient particulate reinforced Al composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Microstructure and mechanical behavior of AA2024/B4C composites with a network reinforcement architecture10.1016/j.jallcom.2017.01.133 ↗
2. Processing and mechanical properties of lamellar–structured Al–7Si–5Cu/TiC composites10.1016/j.matdes.2016.06.008 ↗
3. Preferred orientation and interfacial structure in extruded nano-Al3BC/6061 Al10.1016/j.matdes.2017.05.088 ↗
4. Molten salt assisted solidification nanoprocessing of Al–TiC nanocomposites10.1016/j.matlet.2016.09.023 ↗
5. Effects of solution treatment on tensile properties and strengthening mechanisms of SiCp/6061Al composites fabricated by powder thixoforming10.1016/j.matdes.2016.03.068 ↗
6. Microstructure and mechanical behavior of metallic glass fiber–reinforced Al alloy matrix composites10.1038/srep24384 ↗
7. Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles10.1016/j.msea.2014.02.003 ↗
8. Mechanically alloyed nanocomposites10.1016/j.pmatsci.2012.10.001 ↗
9. Novel nanoparticle–reinforced metal matrix composites with enhanced mechanical properties10.1002/adem.200700106 ↗
10. Simulations of deformation and damage processes of SiCp/Al composites during tension10.1016/j.jmst.2017.09.005 ↗
11. Microstructures and tensile properties of nano-sized SiCp/Al–Cu composites fabricated by semisolid stirring assisted with hot extrusion10.1016/j.matchar.2017.07.013 ↗
12. Developing high toughness and strength Al/TiC composites using ice-templating and pressure infiltration10.1016/j.ceramint.2016.12.038 ↗
13. The nano-sized TiC particle reinforced Al–Cu matrix composite with superior tensile ductility10.1016/j.msea.2014.11.006 ↗
14. Influence of flake thickness on the shape and distribution of Al2O3 particles in Al matrix composites fabricated by flake powder metallurgy10.1016/j.scriptamat.2013.12.019 ↗
15. Strengthening and toughening mechanisms in graphene–Al nanolaminated composite micro–pillars10.1016/j.actamat.2016.11.043 ↗
16. Thermal properties of pressureless melt infiltrated AlN–Si–Al composites10.1016/S1003-6326(13)62598-4 ↗
17. Synthesis and characterization of in situ Al–AlN composite by nitrogen gas bubbling method, J. Alloy10.1016/j.jallcom.2010.11.065 ↗
18. In-situ synthesis of AlN/Mg–Al composites with high strength and high plasticity10.1016/j.jallcom.2017.01.005 ↗
19. Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy10.1016/j.msea.2017.10.035 ↗
20. Three–dimensional rigid multiphase networks providing high–temperature strength to cast AlSi10Cu5Ni1–2 piston alloys10.1016/j.actamat.2011.07.006 ↗
21. A comparative study of thermal conductivity and tribological behavior of squeeze cast A359/AlN and A359/SiC composites10.1007/s11665-017-2734-3 ↗
22. Promoting effect of silicon particles on gas–diffusion–reaction system: in-situ synthesis of AlN in Al–Si materials10.1016/j.jallcom.2017.11.108 ↗
23. Development and characterization of A359/AlN composites for automotive applications10.1016/j.jallcom.2017.08.154 ↗
24. Mechanically alloyed AlN particle-reinforced Al-6061 matrix composites: powder processing, consolidation and mechanical strength and hardness of the as-extruded materials10.1016/j.msea.2006.03.074 ↗
25. Powder injection moulding of an Al–AlN metal matrix composite10.1016/j.msea.2009.02.001 ↗
26. New Al–AlN composites fabricated by squeeze casting: interfacial phenomena10.1016/S1359-835X(02)00159-8 ↗
27. High-strength aluminum-based composites reinforced with BN, AlB2 and AlN particles fabricated via reactive spark plasma sintering of Al–BN powder mixtures10.1016/j.msea.2016.11.011 ↗
28. SAP–like ultrafine–grained Al composites dispersion strengthened with nanometric AlN10.1016/j.msea.2013.09.027 ↗
29. Nanoscaled Al–AlN composites consolidated by equal channel angular pressing (ECAP) of partially in situ nitrided Al powder10.1016/j.msea.2012.11.040 ↗
30. Influence mechanisms of Cu or Fe on the microstructures and tensile properties at 350 °C of network AlNp reinforced Al composites10.1016/j.jallcom.2017.12.125 ↗
31. A novel (AlN + Si3N4)/Al composite with well–balanced strength and ductility10.1016/j.msea.2018.04.053 ↗
32. Dispersing nano–AlN particles cluster by designing Al–Si–AlN/Mg diffusion couples and the preparation of AlN/Mg–Al composite10.1016/j.msea.2019.138347 ↗
33. Microstructure evolution and high temperature tensile properties of AlNp/Al–Fe composites induced by microalloying10.1016/j.jallcom.2019.02.069 ↗
34. Efficient microstructure refinement of Al–Si–Mg alloy manipulated by nanocrystals formed by in-situ crystallization in melt10.1016/j.msea.2019.02.072 ↗
35. Fabrication, microstructure refinement and strengthening mechanisms of nanosized SiCP/Al composites assisted ultrasonic vibration10.1016/j.msea.2018.08.060 ↗
36. Tuning the microstructure features of in–situ nano TiB2/Al–Cu–Mg composites to enhance mechanical properties10.1016/j.jallcom.2018.10.078 ↗
37. A novel heat–resistant Al–Si–Cu–Ni–Mg base material synergistically strengthened by Ni–rich intermetallics and nano-AlNp microskeletons10.1016/j.jmst.2018.09.051 ↗
38. Synchronous improvement of electrical and mechanical performance of A356 alloy reinforced by boron coupling nano-AlNp10.1016/j.jallcom.2019.152217 ↗
39. High–temperature mechanical properties of 2024 Al matrix nanocomposite reinforced by TiC network architecture10.1016/j.msea.2019.138121 ↗
40. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles10.1038/nature16445 ↗
41. Theoretical study and pathways for nanoparticle capture during solidification of metal melt10.1088/0953-8984/24/25/255304 ↗
42. Segregation of particles and its influence on the morphology of the eutectic silicon phase in Al–7wt.% Si alloys10.1016/j.scriptamat.2005.10.016 ↗
43. Inferring the size distribution of 3D particle clusters in metal matrix nanocomposites10.1115/1.4023268 ↗
44. Size Distribution estimation of three–dimensional particle clusters in metal–matrix nanocomposites considering sampling bias10.1115/1.4036642 ↗
45. The diffusion couple technique in phase diagram determination, J. Alloy10.1016/S0925-8388(00)01487-0 ↗
46. Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation10.1016/S0921-5093(03)00624-5 ↗
47. Morphological transformation mechanism of eutectic Si phases in Al–Si alloys by nano-AlNp10.1016/j.jallcom.2018.06.223 ↗
48. Combined centrifugal-slip casting method used for preparation the Al2O3–Ni functionally graded composites10.1016/j.compositesb.2017.12.056 ↗
49. Preparation and characterization of stir cast-aluminium nitride reinforced aluminum metal matrix composites
50. Effect of aluminum nitride (AlN) addition on wear and mechanical properties of Al–Si alloy composites fabricated by stir casting process10.4028/www.scientific.net/KEM.462-463.307 ↗
51. Modeling of metastable phase formation for sputtered Ti1–xAlxN thin films10.1016/j.actamat.2018.12.004 ↗
52. 2016
53. Diffusivity and solubility of Si in the Al metallization of integrated circuits10.1063/1.1653799 ↗
54. Further observations on dendritic growth in metals10.1139/p52-047 ↗
55. Warmuzek · 2004 · vol. 124
56. Rapid control of phase growth by nanoparticles10.1038/ncomms4879 ↗
57. Nanoparticle–induced nucleation of eutectic silicon in hypoeutectic Al–Si alloy10.1016/j.matchar.2016.04.016 ↗
58. Consideration of Orowan strengthening effect in particulate–reinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
59. Microstructure and strengthening mechanism of bimodal size particle reinforced magnesium matrix composite10.1016/j.compositesa.2012.03.007 ↗
60. Strengthening mechanisms in particulate Al/B4C composites produced by repeated roll bonding process10.1016/j.jallcom.2010.11.004 ↗
61. Microstructure evolution and strength degradation mechanisms of high-strength Al–Fe wire10.1007/s10853-018-3060-3 ↗
62. The effect of texture and grain size on improving the mechanical properties of Mg–Al–Zn alloys by friction stir processing10.1038/s41598-018-22344-3 ↗
63. The response of room temperature and high temperature tensile properties to the microstructure variation of an AlN + Si3N4/Al composite by heat treatment10.1016/j.msea.2018.07.035 ↗
64. Strong and tough metal/ceramic micro–laminates10.1016/j.actamat.2017.10.059 ↗
65. Anisotropy, size, and aspect ratio effects on micropillar compression of Al–SiC nanolaminate composites10.1016/j.actamat.2016.05.018 ↗
66. Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles10.1016/j.actamat.2015.09.057 ↗
67. Simultaneously improving strength and ductility for Al–Cu–Mg alloy via threadiness array of TiC nanoparticles
68. Enhancing ductility of titanium matrix composites by multimodal α-grains10.1016/j.scriptamat.2019.06.009 ↗