Dispersing nano–AlN particles cluster by designing Al–Si–AlN/Mg diffusion couples and the preparation of AlN/Mg–Al composite
Source abstract
Abstract
Abstract In this paper, an Al–Si–AlN/Mg diffusion couple has been designed by inserting the master alloy rod into nearly solidified Mg melt, followed by re–heating procedure. It was found that the outward diffusion of Al and inward diffusion of Mg result in the generation of several typical areas among the couple. The formation of Mg17Al12 eutectic phase was detected and the size of nano–sized AlN particle clusters was obviously reduced. When the diffused couple was introduced into Mg melt to produce 0.8AlN/Mg–8Al–0.4Si composite, relatively uniform distribution of AlN particles has been achieved. The tensile strength of the as–cast composite was found to be 221 MPa tested at 25 °C and 148 MPa at 200 °C. This paper may provide suggestions for microstructural control of composite preparation by introducing the master alloys with one matrix into another melt.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Simultaneously increasing strength and ductility of nanoparticles reinforced Al composites via accumulative orthogonal extrusion process10.1080/21663831.2018.1471421 ↗
2. In–situ synthesis of graphene decorated with nickel nanoparticles for fabricating reinforced 6061Al matrix composites10.1016/j.msea.2017.05.084 ↗
3. Effects of ultrasonic vibration treatment on particles distribution of TiB2 particles reinforced aluminum composites10.1016/j.msea.2016.10.103 ↗
4. The origins of high hardening and low ductility in magnesium10.1038/nature15364 ↗
5. Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications10.1016/j.actamat.2012.10.044 ↗
6. On the strength and strain to failure in particle–reinforced magnesium metal–matrix nanocomposites (Mg MMNCs)10.1016/j.msea.2012.07.111 ↗
7. Reaction mechanism in self–propagating high temperature synthesis of TiC–TiB2/Al composites from an Al–Ti–B4C system10.1016/j.msea.2006.11.055 ↗
8. In situ synthesizing SiC particles and its strengthening effect on an Al–Si–Cu–Ni–Mg piston alloy10.1016/j.jallcom.2016.10.170 ↗
9. Synthesis and characterization of high performance low volume fraction TiC reinforced Mg nanocomposites targeting biocompatible/structural applications10.1016/j.msea.2015.01.007 ↗
10. Reactive infiltration synthesis of TiB2–TiC particulates reinforced steel matrix composites10.1016/j.jallcom.2004.08.045 ↗
11. A novel Al matrix composite reinforced by nano–AlNp network10.1038/srep34919 ↗
12. Synthesis of a (ZrAl3+AlN)/Al composite and the influence of particles content and element Cu on the microstructure and mechanical properties10.1016/j.jallcom.2019.03.416 ↗
13. Influence mechanisms of Cu or Fe on the microstructures and tensile properties at 350°C of network AlNp reinforced Al composites10.1016/j.jallcom.2017.12.125 ↗
14. Grain refinement by AlN particles in Mg―Al based alloys10.1016/j.jallcom.2008.12.029 ↗
15. In situ synthesis of AlN particles in Mg–Al alloy by Mg3N2 addition10.1016/j.matlet.2004.02.028 ↗
16. Study on tensile properties and microstructure of cast AZ91D/AlN nanocomposites10.1016/j.msea.2008.04.070 ↗
17. Synthesis and characterization of Mg–AZ91/AlN composites10.1016/j.matdes.2012.02.001 ↗
18. Microstructure and lattice parameters of AlN particle–reinforced magnesium matrix composites fabricated by powder metallurgy10.1007/s40195-015-0333-6 ↗
19. Mechanical properties and fracture behavior of Mg–Al/AlN composite with different particle contents
20. Distribution control of AlN particles in Mg–Al/AlN composites10.1016/j.jallcom.2016.10.190 ↗
21. Indirect improvement of high temperature mechanical properties of a Mg based alloy Elektron21 by addition of AlN nanoparticles10.1016/j.msea.2017.01.103 ↗
22. In situ synthesis of AlN in Mg–Al alloys by liquid nitridation10.1016/j.jmatprotec.2004.06.033 ↗
23. In situ synthesis and formation mechanism of AlN in Mg–Al alloys10.1016/S1875-5372(16)30038-8 ↗
24. Microstructure and mechanical properties of AlN particles in situ reinforced Mg matrix composites10.1016/j.msea.2016.07.056 ↗
25. In–situ synthesis of AlN/Mg–Al composites with high strength and high plasticity10.1016/j.jallcom.2017.01.005 ↗
26. Synthesis and characterization of in situ Al–AlN composite by nitrogen gas bubbling method10.1016/j.jallcom.2010.11.065 ↗
27. Size control of in situ formed reinforcement in metal melts–theoretical treatment and application to in situ (AlN + Mg2Si)/Mg composites10.1016/j.compscitech.2009.08.011 ↗
28. Synthesizing (ZrAl3+AlN)/Mg–Al composites by a ‘matrix exchange’ method10.1016/j.rinp.2018.02.037 ↗
29. Simultaneously improving strength and ductility for Al–Cu–Mg alloy via threadiness array of TiC nanoparticles10.1016/j.mtla.2019.100333 ↗
30. Microstructure and mechanical properties of an AlN/Mg–Al composite synthesized by Al–AlN master alloy10.1007/s40962-018-0261-0 ↗
31. Evolution of Fe–rich phases in Mg melt and a novel method for separating Al and Fe from Al–Si–Fe alloys10.1016/j.matdes.2017.08.029 ↗
32. Diffusion of Al implanted into α–Hf studied by means of the nuclear resonance technique10.1007/s00339-004-2972-8 ↗
33. Heat–resistant magnesium alloys and their development