journal article·2014-07

Effect of hydrogen treatment on properties and structure development in Zr–2.5Nb alloy

M.A. Murzinova, M.R. Shagiev, D. Srivastava, K.V. Manikrishna, S. Neogy, G.K. Dey

Publisher page

Abstract

Abstract Flow stresses at 600 °C of the annealed and quenched Zr–2.5Nb alloy with hydrogen content varying from 0.2 to 20 at%, and microstructure development of the alloy after deformation and subsequent vacuum annealing at 580 °C were studied. It was found that increase in the volume fraction of the βZr-phase due to hydrogen alloying resulted in substantial decrease in the flow stresses and led to αZr-grain/subgrain refinement to submicron level during the deformation at 600 °C. Vacuum annealing resulted in decrease of the hydrogen content and was accompanied by αZr-grain growth.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Valiev · Adv. Eng. Mater. · 2010 · 12 · 67710.1002/adem.201000019 ↗
2. Humphreys · 2004
3. Portnoi · Tsvetnaya Metall. · 1985 · 1 · 93
4. Murzinova · Mater. Sci. Forum · 2008 · 584–586 · 8610.4028/www.scientific.net/MSF.584-586.86 ↗
5. Progress in Hydrogen Treatment of Materials
6. Progress in Hydrogen Treatment of Materials
7. Senkov · Met. Mater. Trans A · 1996 · 27 · 186910.1007/BF02651936 ↗
8. A.A. Ilyin, I.S. Polkin, A.M. Mamonov, V.K. Nosov, in: P.A. Blenkinsop, H.M. Flower, (Eds.), Titanium ’95 – Science and Technology: Proceedings of the Eighth World Conference on Titanium Held at the International Convention Centre, vol. 2, Birmingham, UK, 22–26 October 1995, The Institute of Materials, 1996, pp. 2462–2469.
9. R Terrence Webster, Teledyne Wah Chang Albany, in: ASM Handbook, vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, E-Publishing, ASM International, 1995, pp.1947–1965.
10. Douglass · 1971
11. Zaimovsky · 1994
12. Lütjering · 2007
13. McQueen · J. Mater. Shap. Technol. · 1988 · 5 · 16310.1007/BF02834830 ↗
14. McQueen · J. Miner. Met. Mater. Soc. · 1987 · 39 · 2810.1007/BF03257647 ↗
15. ASM Handbook of Fundamentals of Modeling for Metals Processing
16. Abson · Met. Technol. · 1977 · 4 · 46210.1179/030716977803292402 ↗
17. Weiss · Mater. Sci. Eng. A · 1999 · 263 · 24310.1016/S0921-5093(98)01155-1 ↗
18. Bourell · J. Mater. Shap. Technol. · 1987 · 5 · 5310.1007/BF02833686 ↗
19. ASM Handbook
20. Zuzek · 1992 · 992
21. Sinha · J. Nucl. Mater. · 1970 · 36 · 21110.1016/0022-3115(70)90145-5 ↗
22. Khatamian · J. Alloys Compd. · 2003 · 356–357 · 2210.1016/S0925-8388(03)00094-X ↗
23. Ito · J. Alloys Compd. · 2007 · 446–447 · 45110.1016/j.jallcom.2007.01.084 ↗
24. Singh · J. Alloys Compd. · 2005 · 389 · 10210.1016/j.jallcom.2004.07.048 ↗
25. Srivastava · Mater. Sci. Eng. A · 2000 · 288 · 10110.1016/S0921-5093(00)00818-2 ↗
26. Srivastava · Metall. Mater. Trans. A · 1995 · 26 · 270710.1007/BF02669427 ↗
27. Stukalov · Probl. At. Sci. Technol. · 2000 · 4 · 105
28. Sakai · Acta Metal · 1984 · 32 · 18910.1016/0001-6160(84)90049-X ↗
29. Miller · Scr. Mater. · 1999 · 40 · 138710.1016/S1359-6462(99)00061-5 ↗
30. Zherebtsov · Defect Diffus. Forum · 2002 · 208–209 · 23710.4028/www.scientific.net/DDF.208-209.237 ↗
31. Salishchev · 2002 · 113