Surface composite fabrication using Fe-based alloying powder through infiltration casting technique on copper substrate
Source abstract
Abstract
A process of vacuum infiltration casting technique for production of surface composite on copper substrate is presented. The surface infiltrated layer was fabricated on the copper substrate using Fe-based powder as surface alloying particles. The microstructure and several properties of the infiltrated layer have been studied. With an appropriate choice of processing conditions, a compact infiltrated layer is achievable through the SEM observation. The adhesion strength was evaluated through three-point bending test and thermal cycles. The macro-hardness of the infiltrated layer is about HRC 55 and the distribution of micro-hardness presents gradient change. The average micro-hardness of layer is about HV500. The thermal fatigue properties and oxidation resistance of infiltrated layer were tested at 800 °C. The number of thermal cycles reaches to 110 and 85 for infiltrated layer with a thickness of 1.5 and 2.6 mm, respectively. The infiltrated layer oxidized more rapidly than the substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Ziyuan · J. Mater. Sci. Lett. · 1998 · 17 · 47710.1023/A:1006528410802 ↗
2. Bhat · J. Mater. Sci. · 1991 · 26 · 456710.1007/BF00612391 ↗
3. Feldslein · Plat. Surf. Finish. · 1998 · 85 · 248
4. Himbeault · Metall. Trans. A · 1988 · 19A · 210910.1007/BF02645213 ↗
5. Das · Metall. Mater. Trans. A · 2003 · 34A · 190910.1007/s11661-003-0156-3 ↗
6. Lapin · Intermetallics · 2000 · 8 · 142910.1016/S0966-9795(00)00102-3 ↗
7. Abraham · J. Mater. Sci. · 1990 · 25 · 283910.1007/BF00584890 ↗
8. Kazimierzak · Mater. Des. · 1992 · 13 · 6710.1016/0261-3069(92)90109-U ↗
9. Fromont · Mater. Process. Rep. · 1992 · 7 · 210.1080/08871949.1992.11752483 ↗
10. Dunand · Metall. Trans. A · 1993 · 24A · 216110.1007/BF02648590 ↗
11. Dunand · Mater. Manuf. Process. · 1995 · 10 · 37310.1080/10426919508935033 ↗
12. Nakae · Mater. Sci. Eng. · 1997 · A223 · 2110.1016/S0921-5093(96)10488-3 ↗
13. San Marchi · Metall. Mater. Trans. A · 1998 · 29A · 281910.1007/s11661-998-0322-8 ↗
14. Chen · J. Mater. Sci. · 1996 · 31 · 211710.1007/BF00356634 ↗
15. Um · J. Jpn. Inst. Met. · 1994 · 58 · 55910.2320/jinstmet1952.58.5_559 ↗
16. Suganuma · Mater. Lett. · 1993 · 16 · 2210.1016/0167-577X(93)90176-X ↗
17. Chen · Materials · 1992 · 13 · 180
18. Joslin · Mater. Sci. Eng. A · 1995 · 192–193 · 54410.1016/0921-5093(94)03272-6 ↗
19. Joslin · Intermetallics · 1995 · 3 · 46710.1016/0966-9795(95)00006-K ↗
20. Zhuang · Scripta Metall. Mater. · 1994 · 30 · 90910.1016/0956-716X(94)90414-6 ↗
21. Stecura · Thin Solid Films · 1987 · 150 · 1510.1016/0040-6090(87)90305-1 ↗
22. P.P. Bandyopadhyay, PhD Thesis, IIT Kharagpur, India, 2000.
23. Sims · 1987
24. Kofstad · 1988
25. Wagner · Z. Elektrochem. · 1959 · 63 · 772
26. Gesmundo · Oxid. Met. · 1998 · 49 · 11510.1023/A:1018861804007 ↗
27. Li · Corros. Sci. · 2002 · 44 · 145710.1016/S0010-938X(01)00153-6 ↗