journal article·2024-08Open access

Tempering of Dual Phase steels: Microstructural evolutions and mechanical properties

Alexandre Mathevon, Véronique Massardier, Damien Fabrègue, Thierry Douillard, Philippe Rocabois, Arnaud Ollagnier, Michel Perez

Abstract

Modelling the microstructural evolutions and mechanical properties during the tempering of Dual Phase steels is a key objective for industrials as this phenomenon has a strong impact on the final properties. After having determined the tempering kinetics of fully martensitic steels between 100 °C and 550 °C using thermoelectric Power and hardness measurements, time–temperature equivalences were applied to determine the activation energies of the mechanisms controlling martensite tempering. Two tempering stages were clearly identified and thanks to the use of TEM, SEM and tomography techniques, they could be attributed to cementite precipitation, its spheroidization and recovery phenomena. The second stage was found to be retarded with increasing the manganese content of the steel contrary to the first stage. From these studies, a JMAK model was developed to predict the microstructurals evolutions during tempering. Then, an extension of the Hybrid-mean Field Composite model developed in a previous paper to predict the tensile curves of fresh martensite was proposed to take into account the microstructural evolutions of martensite during tempering. The model was tested for a wide range of physical parameters of the microstructure (phase fraction and chemical composition) and for different tempering heat treatments and gave good agreement with experimental tensile curves.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Tempering of ferrous martensites
2. The tempering of Fe-C lath martensite10.1007/BF02647041 ↗
3. Packet microstructure in Fe-0.2 pct C martensite10.1007/BF02644654 ↗
4. Crystallographic study of the tempering of martensitic carbon steel by electron microscopy and diffraction10.1007/BF02659851 ↗
5. Tempering of low-carbon martensite
6. Tempering of steel. , 1972, vol. 3, no 5, pp. 1043–1054.
7. Evolution of microstructure and strength during the ultra-fast tempering of Fe-Mn-C martensitic steels10.1007/s10853-014-8489-4 ↗
8. Delaying effect of cementite on recrystallization kinetics of a Ti-Nb microalloyed high-formability steel10.1007/s11661-020-05859-1 ↗
9. Hardness of tempered martensite in carbon and low-alloy steels10.1007/BF02646882 ↗
10. Effect of partitioning of Mn and Si on the growth kinetics of cementite in tempered Fe-0.6 mass% C martensite10.1016/j.actamat.2007.05.023 ↗
11. The precipitation of carbides during tempering of high carbon martensite10.2320/matertrans1960.12.170 ↗
12. Tempering of steel
13. Correlation between internal friction background and the concentration of carbon in solid solution in a martensitic steel10.1016/j.msea.2006.03.115 ↗
14. The tempering of iron-carbon martensite; dilatometric and calorimetric analysis
15. Microstructural evolution of martensitic 100Cr6 bearing steel during tempering: From thermoelectric power measurements to the prediction of dimensional changes10.1016/j.actamat.2009.03.024 ↗
16. Tempering of martensite in dual-phase steels and its effects on softening behavior10.1007/s11661-011-0739-3 ↗
17. Bull. acad. sci. urss
18. Kinetics of phase change. I general theory10.1063/1.1750380 ↗
19. American institute of mining and metallurgical engineers
20. Time-temperature relations in tempering steel. Trans. AIME, 1945, vol. 162, pp. 223–249.
21. Hardness of tempered martensite in carbon and low-alloy steels10.1007/BF02646882 ↗
22. Mechanical behavior of tempered martensite: Characterization and modeling10.1016/j.msea.2017.08.089 ↗
23. Investigation and mean-field modelling of microstructural mechanisms driving the tensile properties of dual-phase steels10.1016/j.msea.2021.141532 ↗
24. Martensite Reactions in Alloy Steels
25. The temperature range of martensite formation
26. A model for predicting the Ms temperatures of steels
27. Empirical formulae for the calculation of some transformation temperatures
28. A critical review of data sources for isothermal transformation and continuous cooling transformation diagrams
29. The Effects of Alloying Elements on the Heat Treatment of Steel
30. Determination of martensite start temperature in engineering steels. Part I Empirical relations describing the effect of steel chemistry10.2320/matertrans1989.41.761 ↗
31. Determination of martensite-start temperature in steels: Bayesian neural network model10.2355/isijinternational.42.894 ↗
32. Bainite and martensite start temperature calculated with exponential carbon dependence10.1179/1743284711Y.0000000097 ↗
33. Extension of the martensite transformation temperature relation to larger alloying elements and contents10.1002/adem.201300116 ↗
34. Otsu method and K-means
35. A review on Otsu image segmentation algorithm
36. Bemerkungen über thermokraft und widerstand10.1016/S0031-8914(35)90101-X ↗
37. Microstructures and hardness of as-quenched martensites (0.1-0.5%C)10.1016/j.actamat.2011.05.061 ↗
38. Toward a new interpretation of the mechanical behaviour of As- quenched low alloyed martensitic steels10.2355/isijinternational.52.717 ↗
39. Towards the microstructure design of DP steels: a generic size-sensitive mean-field mechanical model10.1016/j.msea.2015.04.017 ↗