Microstructure and mechanical properties of AlTiCrFe and AlTiCrCu alloys processed by Laser Powder Bed Fusion
Source abstract
Abstract
Additive manufacturing (AM) of aluminium alloys urges new alloy compositions to meet the requirements for high-strength and processability of the engineering products. This research focuses on the development of two Al alloys, AlTiCrFe and AlTiCrCu, with the goal to exploit the potential of transition element additions for grain refinement and increasing strength. Robust processability and build rates are reached for the two alloys, with no cracks and high density up to 99.8%. AlTiCrFe shows a bimodal microstructure, with the presence of ultrafine and fine grained zones, that can be attributed to a dual precipitation stage. Al3Ti precipitates are present in the ultrafine grained zone, confirming the effectivity of Ti as grain refiner. In addition, Al6Fe precipitates are present in the fine grained region, as a consequence of the later precipitation stage. AlTiCrCu, on the contrary, shows an homogeneous ultrafine grain microstructure, with Cu segregating at the grain boundaries. SAED analyses confirm the phase identification with the presence of high volume density cubic precipitates of Al3Ti_L12. AlTiCrFe and AlTiCrCu exhibit a yield strength value of 363 ± 1 MPa and 340 ± 1 MPa, respectively. These findings indicate that the two alloys open up new possibilities for a novel class of aluminium alloys for AM, leveraging the incorporation of transition elements, which aids in achieving strength during the as-built state, eliminating the requirement for supplementary heat treatment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. R.S. Mishra, S. Thapliyal, Design approaches for printability-performance synergy in Al alloys for laser-powder bed additive manufacturing, Mater. Des. 204, http://dx.doi.org/10.1016/j.matdes.2021.109640.10.1016/j.matdes.2021.109640 ↗
2. Additive manufacturing of metallic components – Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
3. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
4. Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion10.1016/j.matdes.2022.110779 ↗
5. Aversa · 2019
6. Alloy design and adaptation for additive manufacture10.1016/j.jmatprotec.2021.117358 ↗
7. On the selective laser melting (SLM) of the AlSi10Mg alloy: Process, microstructure, and mechanical properties10.3390/ma10010076 ↗
8. Design high-strength al-mg-si alloy fabricated by laser powder bed fusion: Cracking suppression and strengthening mechanism10.1016/j.msea.2023.144591 ↗
9. Tot · 2003
10. Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting10.1016/j.cirp.2016.04.057 ↗
11. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
12. Influence of SLM scan-speed on microstructure, precipitation of al3sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys10.1016/j.matdes.2017.11.053 ↗
13. Microstructure characterization and mechanical performance of laser powder bed fusion processed almgsczr alloy: Effect of heat treatment10.1016/j.msea.2022.144501 ↗
14. Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting10.1016/j.actamat.2018.04.053 ↗
15. Precipitation in a 2xxx series Al-Cu-Mg-Zr alloy fabricated by laser powder bed fusion10.1016/j.matdes.2021.110131 ↗
16. Microstructure and mechanical properties of zr-modified aluminum alloy 5083 manufactured by laser powder bed fusion
17. L. Deillon, F. Jensch, F. Palm, M. Bambach, A new high strength Al–Mg–Sc alloy for laser powder bed fusion with calcium addition to effectively prevent magnesium evaporation, J. Mater Process. Technol. 300, http://dx.doi.org/10.1016/j.jmatprotec.2021.117416.10.1016/j.jmatprotec.2021.117416 ↗
18. An Al-5Fe-6Cr alloy with outstanding high temperature mechanical behavior by laser powder bed fusion
19. T. Kimura, T. Nakamoto, T. Ozaki, T. Miki, Microstructures and mechanical properties of aluminum-transition metal binary alloys (Al-Fe, Al-Mn, and Al-Cr) processed by laser powder bed fusion, J. Alloys Compd. 872, http://dx.doi.org/10.1016/J.JALLCOM.2021.159680.10.1016/j.jallcom.2021.159680 ↗
20. Challenges for research and development of new aluminum alloys
21. Microstructure-hardness relationship of Al-(L12)Al3Ti nanocomposites prepared by rapid solidification processing10.1016/j.intermet.2009.09.009 ↗
22. A novel rapid alloy development method towards powder bed additive manufacturing, demonstrated for binary Al-Ti, -Zr and -Nb alloys
23. Nucleation and precipitation strengthening in dilute Al-Ti and Al-Zr alloys10.1007/s11661-007-9283-6 ↗
24. A new al-cu alloy for lpbf developed via ultrasonic atomization10.1016/j.matdes.2023.111907 ↗
25. M. Roscher, S. Balachandran, D. Mayweg, E. Jägle, Development of Al-Ti-based alloys for laser powder bed fusion, Addit. Manuf. 47, http://dx.doi.org/10.1016/j.addma.2021.102315.10.1016/j.addma.2021.102315 ↗
26. Toropova · 2017
27. D. Schimbäck, P. Mair, M. Bärtl, F. Palm, G. Leichtfried, S. Mayer, P.J. Uggowitzer, S. Pogatscher, Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing, Scr. Mater. 207, http://dx.doi.org/10.1016/j.scriptamat.2021.114277.10.1016/j.scriptamat.2021.114277 ↗
28. Nanoquasicrystalline al–fe–cr-based alloys, part ii. mechanical properties10.1016/j.actamat.2009.07.009 ↗
29. X. Qi, N. Takata, A. Suzuki, M. Kobashi, M. Kato, Laser powder bed fusion of a near-eutectic Al–Fe binary alloy: Processing and microstructure, Addit. Manuf. 35, http://dx.doi.org/10.1016/j.addma.2020.101308.10.1016/j.addma.2020.101308 ↗
30. Change in microstructural characteristics of laser powder bed fused Al–Fe binary alloy at elevated temperature10.1016/j.jmst.2021.04.038 ↗
31. J.Y. Xu, P.C. Zhang, R. Guo, L.X. Liu, Y.P. Kang, Z. Liu, C. Zhang, L. Liu, Toughening the additively manufactured Al alloys via manipulating microstructural heterogeneity, J. Alloys Compd. 945, http://dx.doi.org/10.1016/j.jallcom.2023.169322.10.1016/j.jallcom.2023.169322 ↗
32. Composition design method of Al-Cu alloy for laser powder bed fusion10.1016/j.jallcom.2022.165298 ↗
33. P. Mair, I. Letofsky-Papst, G. Leichtfried, Microstructural features and mechanical properties of a novel Ti- and Zr-modified Al-Mn alloy processed by laser powder bed fusion, J. Alloys Compd. 897, http://dx.doi.org/10.1016/j.jallcom.2021.163156.10.1016/j.jallcom.2021.163156 ↗
34. Influence of storage conditions and reconditioning of alsi10mg powder on the quality of parts produced by laser powder bed fusion (lpbf)
35. Understanding the laser powder bed fusion of alsi10mg alloy10.1007/s13632-020-00659-w ↗
36. Processability and characterization of a20x aluminum alloy fabricated by laser powder bed fusion
37. Achieving high strength in laser powder-bed fusion processed AlFeCuZr alloy via dual-nanoprecipitations and grain boundary segregation10.1016/j.jmst.2022.07.033 ↗
38. A novel laser powder bed fusion al-fe-zr alloy for superior strength-conductivity trade-off10.1016/j.scriptamat.2022.114878 ↗
39. M.H. Ghoncheh, M. Sanjari, A.S. Zoeram, E. Cyr, B.S. Amirkhiz, A. Lloyd, M. Haghshenas, M. Mohammadi, On the microstructure and solidification behavior of new generation additively manufactured Al-Cu-Mg-Ag-Ti-B alloys, Addit. Manuf. 37, http://dx.doi.org/10.1016/j.addma.2020.101724.10.1016/j.addma.2020.101724 ↗
40. Origin of non-uniform plasticity in a high-strength Al-Mn-Sc based alloy produced by laser powder bed fusion10.1016/j.jmst.2021.06.042 ↗
41. B.J. Brindley, P.J. Worthington, Yield-point phenomena in substitutional alloys, 15 (1) (2013) 101–141 http://dx.doi.org/10.1179/MTLR.1970.15.1.101.10.1179/mtlr.1970.15.1.101 ↗
42. Microstructure and mechanical properties of a TiB2-modified Al–Cu alloy processed by laser powder-bed fusion
43. Meyers · 1984 · 761
44. Kaufman · 1999
45. Modelling of solid solution strengthening in multicomponent alloys10.1016/j.msea.2017.06.001 ↗
46. Substitutional solution hardening10.1016/0001-6160(63)90213-X ↗
47. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
48. Developing a high-strength al-mg-si-sc-zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms10.1016/j.actamat.2020.03.060 ↗
49. Precipitation strengthening at ambient and elevated temperatures of heat-treatable al(sc) alloys10.1016/S1359-6454(02)00201-X ↗