journal article·2022-08Open access

Influence of particle content on the ductility of extruded non-recrystallized aluminium alloys subjected to shear loading

Asle Joachim Tomstad, Bjørn Håkon Frodal, Tore Børvik, Odd Sture Hopperstad

Abstract

In-plane shear tests were conducted on two extruded 6000-series aluminium alloys to investigate the influence of constituent particles on ductile fracture. The two alloys have previously been characterized and found to have different area fraction of constituent particles while having similar grain structure, crystallographic texture, strength, and work hardening. Specimens of both alloys were machined from flat profiles with their gauge section oriented along either the extrusion direction or the transverse direction. The specimens were loaded in shear until fracture and an experimental-numerical approach was employed to analyse the stress and strain fields, which involved digital image correlation and crystal plasticity finite element analysis. The fracture mode was determined by examining digital images captured during the experiment, while the fracture surface of representative specimens was examined in a scanning electron microscope. The shear strain across the gauge section at failure was substantially lower for the alloy with higher fraction of constituent particles, and the negative effect of the particle content on the ductility was found to be more pronounced for the tests in the transverse direction. The crystal plasticity finite element analyses showed an extensive texture development within the gauge region and that the local shear strain at failure was somewhat different in the two loading directions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Ductile fracture by void growth to coalescence10.1016/S0065-2156(10)44003-X ↗
2. Failure of metals I: Brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
3. On the ductile enlargement of voids in triaxial stress fields10.1016/0022-5096(69)90033-7 ↗
4. Void growth in 6061-aluminum alloy under triaxial stress state10.1016/S0921-5093(02)00073-4 ↗
5. Cavity formation from inclusions in ductile fracture of A508 steel10.1007/BF02648336 ↗
6. Experimental characterization and numerical modeling of micromechanical damage under different stress states10.1016/j.matdes.2013.02.075 ↗
7. Anisotropic ductile fracture: Part I: experiments10.1016/j.actamat.2004.06.020 ↗
8. Damage assessment in metallic structural materials using high resolution synchrotron X-ray tomography10.1016/S0168-583X(02)01692-0 ↗
9. Visualization by X-ray tomography of void growth and coalescence leading to fracture in model materials10.1016/j.actamat.2008.02.027 ↗
10. Experimental investigation of void coalescence in metallic sheets containing laser drilled holes10.1016/j.actamat.2007.12.035 ↗
11. Rupture mechanisms in combined tension and shear – Experiments10.1016/j.ijsolstr.2006.09.031 ↗
12. Tension–torsion fracture experiments—Part I: experiments and a procedure to evaluate the equivalent plastic strain10.1016/j.ijsolstr.2013.08.029 ↗
13. Determination of the effect of stress state on the onset of ductile fracture through tension-torsion experiments10.1007/s11340-013-9788-4 ↗
14. Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao–Wierzbicki results revisited10.1016/j.ijsolstr.2015.05.006 ↗
15. Tomstad · 2022
16. Ductile failure behavior of polycrystalline Al 6061-T6 under shear dominant loading10.1007/s10704-012-9793-0 ↗
17. Evaluation of constitutive models for textured aluminium alloys using plane-strain tension and shear tests10.1007/s12289-011-1033-z ↗
18. Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading – Part II: ductile fracture10.1016/j.ijplas.2011.11.001 ↗
19. Anisotropic failure modes of high-strength aluminium alloy under various stress states10.1016/j.ijplas.2013.02.004 ↗
20. Anisotropic behavior in plasticity and ductile fracture of an aluminum alloy10.4028/www.scientific.net/KEM.651-653.163 ↗
21. Anisotropic ductile fracture criterion based on linear transformation10.1016/j.ijplas.2017.04.008 ↗
22. Alternative approach to model ductile fracture by incorporating anisotropic yield function10.1016/j.ijsolstr.2019.01.011 ↗
23. Ductile damage mechanism under shear-dominated loading: in-situ tomography experiments on dual phase steel and localization analysis10.1016/j.ijplas.2018.06.003 ↗
24. Ductile damage of AA2024-T3 under shear loading: mechanism analysis through in-situ laminography10.1016/j.actamat.2020.116556 ↗
25. Quantitative assessment of the impact of second phase particle arrangement on damage and fracture anisotropy10.1016/j.actamat.2018.02.003 ↗
26. Ductilization of aluminium alloy 6056 by friction stir processing10.1016/j.actamat.2017.01.047 ↗
27. Void growth and coalescence in a magnesium alloy studied by synchrotron radiation laminography10.1016/j.actamat.2018.05.026 ↗
28. Effects of constituent particle content on ductile fracture in isotropic and anisotropic 6000-series aluminium alloys10.1016/j.msea.2021.141420 ↗
29. A study of large plastic deformations in dual phase steel using digital image correlation and FE analysis10.1007/s11340-007-9066-4 ↗
30. Numerical simulation of ductile fracture in modified Arcan test10.1016/j.mspro.2014.06.109 ↗
31. Thomesen · 2019
32. Anisotropic plasticity and fracture of three 6000-series aluminium alloys10.3390/met11040557 ↗
33. Engler · 2010
34. Influence of pre-compression on the ductility of AA6xxx aluminium alloys10.1007/s10704-017-0204-4 ↗
35. Simplified temperature-dependent elasto-viscoplastic deformation and fracture modeling of a talcum-filled PP/PE co-polymer10.1016/j.ijplas.2019.04.003 ↗
36. Abaqus · 2019
37. Modelling and simulation of ductile failure in textured aluminium alloys subjected to compression-tension loading10.1016/j.ijplas.2019.01.008 ↗
38. On the coupling of damage and single crystal plasticity for ductile polycrystalline materials
39. Determining the strain to fracture for simple shear for a wide range of sheet metals10.1016/j.ijmecsci.2018.10.007 ↗