Microstructure impact on the machining of two gear steels. Part 1: Derivation of effective flow curves
Source abstract
Abstract
A multiscale approach is presented here to investigate the effect of the ferrite-pearlite microstructure after annealing on the subsequent machining process of steel gears. The case-hardening steel 18CrNiMo7-6 and a cost efficient alternative with reduced Cr and Ni content have been studied. After detailed microstructure characterization, three different scales are defined: the nano-scale with pearlite, built of ferrite-cementite bi-lamellas, the micro-scale, which corresponds to a RVE of the ferrite/pearlite microstructure and the macro-scale. In order to derive the effective flow behaviour of pearlite, virtual uniaxial tensile and shear tests of the ferrite/cementite bi-lamella are performed at the nanoscale. The flow behaviour of the ferrite phase is described there by an extension of the Kocks-Mecking law suitable for large machining strains. Moreover, at the nanoscale, the effective flow curve of the ferrite matrix having either small MnS or NbC inclusions is determined. At the microscale, effective flow curves for both steel grades are derived from virtual tests on 3D RVE's of both steel microstructures and compared with experimental measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Tailoring the Microstructure for Micro-alloyed Carburizing Steels by an ICME Approach” in “Fundamentals and Applications of Mo and Nb Alloying in High Performance Steels
2. AixViPMaP® - an operational platform for microstructure modelling workflows10.1007/s40192-019-00138-3 ↗
3. Schmitz · 2012
4. Derivation of anisotropic flow curves of ferrite-pearlite pipeline steel via a two-level homogenization scheme10.1016/j.msea.2012.12.064 ↗
5. Cutting simulations of two gear steels with microstructure dependent material laws10.1016/j.procir.2017.03.332 ↗
6. Work hardening of ferrite and microstructure based modelling of its mechanical behaviour under tension10.1016/j.actamat.2008.05.023 ↗
7. Physics and phenomelogy of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
8. A unified phenomelogical description of work hardening and creep based one-parameter models10.1016/0001-6160(84)90202-5 ↗
9. A model for the grain size dependent work hardening of copper10.1016/j.scriptamat.2006.05.018 ↗
10. Microstructure-based model for static mechanical behaviour of multiphase steels10.1016/j.actamat.2005.10.059 ↗
11. Structure-property optimization of ultrafine-graided dual-phase steels using a microstructure-based strain hardening model10.1016/j.actamat.2006.11.029 ↗
12. Modified Kocks-Mecking-Estrin model to account nonlinear strain hardening10.1007/s11661-018-5001-9 ↗
13. Revisited storage sand dynamic recovery of dislocation density evolution law: toward a generalized Kock-Mecking model of strain hardening10.1002/adem.201200083 ↗
14. A simple model for dislocation behaviour, strain and strain rate hardening evolution in deforming aluminium alloys10.1016/S0749-6419(01)00015-8 ↗
15. Multiscale modelling of failure initiation in a ferritic-pearlitic steel10.1016/j.actamat.2015.08.035 ↗
16. DAMASK – the Düsseldorf Advanced Material Simulation Kit for modelling multi-physics crystal plasticity, thermal and damage phenomena from the single crystal up to the component scale10.1016/j.commatsci.2018.04.030 ↗
17. Microstructure based modelling for the mechanical behaviour of ferrite-pearlite steels suitable to capture isotropic and kinematic hardening10.1016/j.msea.2008.06.009 ↗
18. The mechanism of plastic deformation of crystals: Part I theory
19. The cleavage strength of polycrystals
20. Study of large strain deformation of dilute solid solutions of Al-Cu using channel die compression10.1016/0921-5093(95)09992-1 ↗
21. The isotropic shear modulus of multicomponent Fe-base solid solutions10.1016/S1359-6454(02)00096-4 ↗
22. Chen · 2013
23. Phonons and elasticity of cementite through the Curie temperature10.1103/PhysRevB.95.024308 ↗
24. Experimental measurement of Young's modulus from single crystalline cementite10.1016/j.scriptamat.2014.03.013 ↗
25. Assessment of elastic anisotropy and incipient plasticity in Fe3C by nano-indentation10.1557/jmr.2011.284 ↗
26. Structural, elastic and electronic properties of Fe3C from first principles
27. Isaichev · Zh. Tekh. Fiz. · 1947 · 17 · 835
28. A molecular dynamics of strength of cementite F3C
29. Hill · Proc. Roy. Soc. Lond. · 1948 · 193 · 281
30. High temperature deformation behaviour of bulk cementite produced by mechanical alloying and spark plasma sintering10.1016/j.msea.2003.10.285 ↗
31. Deformation behaviour of cementite in deformed high carbon steel observed by X-ray diffraction with synchrotron radiation10.1007/s11661-017-4229-0 ↗
32. First principles study of structural stability, elastic and dynamical properties of MnS10.1016/j.commatsci.2014.07.022 ↗
33. Mechanical properties of Manganese sulphides in the temperature range between room temperature and 1000°C10.2355/isijinternational1966.25.989 ↗
34. 2019
35. First principles study the stability and mechanical properties of MC (M=Ti, V, Zr, Nb, Hf and Ta) compounds10.1016/j.jallcom.2013.08.045 ↗
36. The tribological and mechanical properties of Niobium carbides (NbC) bonded with Cobalt or Fe3Al10.1016/j.wear.2014.09.007 ↗
37. Optimal polyhedral description of 3D polycrystals: method and application to statistical and synchrotron X-ray diffraction data10.1016/j.cma.2017.10.029 ↗
38. First-principles study of structural, elastic and high-pressure properties of cerium chalcogenides10.1016/j.physb.2005.03.029 ↗
39. 2019
40. 2019
41. Elastic properties of reinforced solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗