journal article·2021-06

Microstructure and mechanical properties of two Al alloys welded by linear friction weld

Shuang Xie, Zhangwen Xia, Rengen Ding, Hangyue Li, Paul Bowen

Publisher page

Abstract

Abstract Two high strength Al alloys AA2050 and AA7010 have been joined using linear friction welding (LFW) in this study. Microstructural evolution across the weld line developed during linear friction welding has been examined. Their effects on mechanical properties have also been evaluated. A clean weld region where there is free of microcracking, microporosity, and oxides, was obtained. Dynamic recrystallization (nearly full and partial) took place on the weldment. Dissolution of ‘parent’ precipitates in centre weld zone (CWZ) and thermomechanical affected zone (TMAZ) was observed, thus leading to lower hardness and strength compared with the parent materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Aluminum-Copper-Lithium alloy 2050 developed for medium to thick plate10.1007/s11665-009-9554-z ↗
2. The variation of the unstrained lattice parameter in an AA7010 friction stir weld10.1016/j.actamat.2007.01.024 ↗
3. The effect of plastic deformation on T1 precipitation
4. Berg · Acta Mater. · 2001 · 49 · 344310.1016/S1359-6454(01)00251-8 ↗
5. Polmear · 1995
6. Friction stir welding for the transportation industries10.1016/S0261-3069(97)00062-9 ↗
7. Precipitation sequence in friction stir weld of 6063 aluminium during ageing10.1007/s11661-999-0223-5 ↗
8. Microstructure distribution in an AA2050 T34 friction stir weld and its evolution during post-welding heat treatment10.1016/j.actamat.2015.08.068 ↗
9. Effect of the ageing on precipitation spatial distribution in stationary shoulder friction stir welded AA2050 alloys10.1016/j.matchar.2019.06.006 ↗
10. Heterogeneity of the nugget microstructure in a thick 2050 Al friction stir weld10.1007/s11661-014-2638-x ↗
11. Linear friction welding of dissimilar alloys: microstructural characterization and design guidelines10.1007/s12289-015-1279-y ↗
12. On the linear friction welding process of Al alloys: experimental insights through process monitoring10.1016/j.cirp.2013.03.056 ↗
13. High-frequency linear friction welding of Al alloys10.1016/j.matdes.2017.11.043 ↗
14. Mechanical and microstructural characterization of 2124A/25vol.%SiCp joints obtained by linear friction welding10.1016/j.compositesa.2010.03.009 ↗
15. Hardening and softening effects in aluminium alloys during high-frequency linear friction welding10.1016/j.jmatprotec.2018.01.002 ↗
16. The role of plastic deformation on the competitive microstructural evolution and mechanical properties of a novel Al–Li–Cu–X alloy10.1016/S1471-5317(00)00002-X ↗
17. T1 (Al2CuLi) precipitation in aluminium–copper–lithium alloys10.1179/030634572790445975 ↗
18. Crystal structure and stability of T1, precipitates in aged Al–Li–Cu alloys
19. HREM study and structure modeling of the η′ phase, the hardening precipitates in commercial Al–Zn–Mg alloys10.1016/S1359-6454(99)00138-X ↗
20. The microstructure determination of the dispersoid phases in 2024 aluminum alloys
21. Sidhar · J. Alloys Compd. · 2017 · 722 · 33010.1016/j.jallcom.2017.06.141 ↗
22. De Geuser · Phil. Mag. · 2014 · 94 · 145110.1080/14786435.2014.887862 ↗
23. Avettand-Fènoël · Mater. Char. · 2019 · 154 · 19310.1016/j.matchar.2019.06.006 ↗
24. Microstructure distribution in an AA2050 T34 friction stir weld and its evolution during post-welding heat treatment10.1016/j.actamat.2015.08.068 ↗
25. Lin · Mater. Char. · 2018 · 141 · 7410.1016/j.matchar.2018.04.029 ↗
26. The strength mechanism of spray forming Al-Zn-Mg-Cu alloy by underwater friction stir welding10.1016/j.matdes.2016.04.036 ↗
27. Zhang · Mater. Sci. & Eng. A · 2018 · 717 · 8510.1016/j.msea.2018.01.067 ↗
28. Grong · 1997
29. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
30. Mishra · 2007
31. On the formation of faceted Al3Zr (β′) precipitates in Al-Li-Cu-Mg-Zr alloys10.1016/S1359-6454(99)00102-0 ↗
32. Phase composition and mechanical properties of Al-1.5%Cu-1.5% Mn-0.35%Zr(Fe,Si) wire alloy10.1016/j.jallcom.2018.12.240 ↗
33. An intermediate phase appearing in Li2-Al3Zr to Do23-Al3Zr phase transformation of rapidly solidified Al-Zr alloy10.1016/0167-577X(96)00002-X ↗
34. Microstructural properties of friction stir welded and post-weld heat-treated 7449 aluminium alloy thick plate10.1016/j.msea.2007.06.025 ↗
35. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
36. The cleavage strength of polycrystals
37. The effect of grain size and strain on the tensile flow stress of aluminium at room temperature10.1016/0001-6160(77)90171-7 ↗
38. Brown · 1971
39. Enhancement of high temperature strength of 2219 alloys through small additions of Nb and Zr and a novel heat treatment10.1007/s11661-018-4614-3 ↗
40. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys10.1016/S1359-6462(02)00497-9 ↗
41. Nie · 1996 · vols. 217–222 · 1257
42. Gilmore · Met. & Mat. Trans. A · 1997 · 28 · 139910.1007/s11661-997-0203-6 ↗
43. Dixit · Mater. Sci. Eng. A · 2008 · 478 · 16310.1016/j.msea.2007.05.116 ↗