Microstructural response to compression deformation of ultrafine-grained aluminum with various microstructures
Source abstract
Abstract
Abstract Ultrafine-grained aluminum having a variety of microstructural features such as fibrous grain morphology, strong or random texture and a dominance of low- or high-angle grain boundaries was compressed to 4% of true strain. This made it possible to measure yield strength and begin a microstructure evolution to accommodate an external load. The level of deformation was high enough to provide changes in the microstructure, but relatively low in order to make it possible to determine the deformation mode in grain types recognized in the pre-compressed condition, before they become unrecognizable. As a next step, a detailed EBSD examination of these samples before and after compression was performed to track those changes. These observations revealed that, in the samples with a fibrous microstructure, the role of particular fibers changes when the grain refinement is more pronounced within them. In the sample with a relatively uniform microstructure and a grain size of below 800 nm, the post-deformation observations indicated there had been significant grain rotations with a blurring of the initial texture. Based on our observations, we can state that the heterogeneity of plastic deformation mechanisms in ultrafine-grained aluminum is dependent on local variations in microstructure – the arrangement of defects and the crystallographic orientation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Producing bulk ultrafine-grained materials by severe plastic deformation10.1007/s11837-006-0213-7 ↗
2. Producing bulk ultrafine-grained materials by severe plastic Deformation : ten years later10.1007/s11837-016-1820-6 ↗
3. Microstructure and mechanical properties of nanostructured 1050/6061 aluminum alloy fabricated by four-layer stack accumulative roll-bonding10.1166/jnn.2015.10383 ↗
4. Enhanced grain refinement and microhardness by hybrid processing using hydrostatic extrusion and high-pressure torsion10.1016/j.msea.2017.12.007 ↗
5. The process of grain refinement in equal-channel angular pressing10.1016/S1359-6454(97)00494-1 ↗
6. Microstructural evolution in high purity aluminum processed by ECAP10.1016/j.msea.2009.06.032 ↗
7. Effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE10.1016/S1359-6454(99)00388-2 ↗
8. Grain refinement in technically pure aluminium plates using incremental ECAP processing10.1016/j.msea.2015.03.098 ↗
9. Mechanism of grain refinement in aluminium in the process of hydrostatic extrusion10.4028/www.scientific.net/SSP.114.109 ↗
10. The influence of boundary structure on the mechanical properties of ultrafine grained AA105010.1016/j.msea.2005.08.068 ↗
11. Microstructure and flow stress of polycrystals and single crystals
12. Hall – petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
13. Dislocation structures. Part I. Grain orientation dependence10.1080/14786430701652851 ↗
14. Orientation dependence of the deformation microstructure in compressed aluminum10.1016/j.scriptamat.2011.11.034 ↗
15. Influence of grain size in the near-micrometre regime on the deformation microstructure in aluminium10.1016/j.actamat.2013.07.046 ↗
16. Inter- and intragranular plasticity mechanisms in ultrafine-grained Al thin films : an in situ TEM study10.1016/j.actamat.2012.09.051 ↗
17. Grain rotations in ultrafine-grained aluminum films studied using in situ TEM straining with automated crystal orientation mapping10.1016/j.matdes.2016.10.015 ↗
18. Mechanisms of plastic deformation in ultrafine-grained aluminium – in-situ and ex-post studies10.1016/j.msea.2017.12.083 ↗
19. Specimen- and grain-size dependence of compression deformation behavior in nanocrystalline copper10.1016/j.ijplas.2013.12.003 ↗
20. Effect of grain size and specimen dimensions on micro-forming of high purity aluminum10.1016/j.msea.2015.08.060 ↗
21. Incremental ECAP as a method to produce ultrafine grained aluminium plates10.4028/www.scientific.net/KEM.710.59 ↗
22. Effects of temperature, strain rate and specimen size on the deformation behaviors at micro/meso-scale in ultrafine-grained pure Al10.1016/j.matchar.2015.10.003 ↗
23. A deformation mechanism based crystal plasticity model of ultrafine-grained/nanocrystalline FCC polycrystals10.1016/j.ijplas.2016.08.001 ↗
24. Grain boundary rotations in solids10.1103/PhysRevLett.109.175501 ↗
25. LEDS: Properties and effects of low energy dislocation structures10.1016/0025-5416(87)90442-3 ↗
26. Texture of metals
27. Microtexture and microstructure evolution during processing of pure aluminum by repetitive ECAP
28. Zhilyaev · 2006 · vol 441 · 245