A unique combination of in-situ and multi-scale methodologies to analyze damage mechanisms of temper rolled zinc coating
Source abstract
Abstract
Abstract Coated sheets for car body are assembled by spot-welding and, more and more, by adhesive bonding. Thus, during life time, the coating endures stresses which can lead to the failure of the whole bonded assembly. The behavior of the zinc coating has then to be primarily studied during tension of flat samples. Several investigation techniques, including in-situ characterizations and 3D observations, are combined to observe and understand the damage mechanisms of the zinc coating during plastic deformation. A specific attention is paid to the influence of temper rolling which is usually applied on low-carbon steel sheets after annealing and hot-dip coating. Damage is mainly observed at the boundary of large zinc grains lying on the surface plateaus, non-deformed by rolling, and often nucleates at the defects due to dendritic zinc solidification.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Corrosion Behavior and Inhibition · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Legendre · 2017
2. Deformation and damage mechanisms of zinc coatings on hot-dip galvanized steel sheets: Part I. Deformation modes10.1007/s11661-004-0007-x ↗
3. Deformation and damage mechanisms of zinc coatings on hot-dip galvanized steel sheets: Part II. Damage modes10.1007/s11661-004-0008-9 ↗
4. Interface fracture behavior of zinc coatings on steel: experiments and finite element calculations10.1016/j.surfcoat.2006.08.046 ↗
5. Characterization of the failure behavior of zinc coating on dual phase steel under tensile deformation10.1016/j.msea.2011.04.058 ↗
6. Relation between microstructure and adhesion of hot dip galvanized zinc coatings on dual phase steel10.1016/j.actamat.2012.02.003 ↗
7. Damage micromechanisms in a hot dip galvanized steel
8. Fracture properties of zinc coating layers in a galvannealed steel and an electrolytically galvanized steel10.1016/j.msea.2018.05.084 ↗
9. Cold rolling of galvanized strips: a new approach to the evaluation of zinc fines formation10.1016/j.jmatprotec.2006.03.196 ↗
10. Morphology and kinetics of interfacial layer formation during continuous hot-dip galvanizing and galvannealing10.1007/s11661-008-9552-z ↗
11. Surface chemistry and reactivity of skin-passed hot dip galvanized coating10.1051/metal/2009013 ↗
12. Experimental and simulation textures in an asymmetrically skin-passed zinc galvanized sheet10.1016/j.scriptamat.2005.04.054 ↗
13. Multi-scale investigation of highly anisotropic zinc alloys using crystal plasticity and inverse analysis10.1016/j.msea.2018.05.038 ↗
14. Dependence of elastic properties of argillaceous rocks on moisture content investigated with optical full-field strain measurement techniques10.1016/j.ijrmms.2012.04.004 ↗
15. Multiscale experimental investigation of crystal plasticity and grain boundary sliding in synthetic halite using digital image correlation10.1002/jgrb.50065 ↗
16. Multiscale strain measurements of plastically deforming polycrystalline titanium: role of deformation heterogeneities10.1016/j.ijplas.2009.04.006 ↗
17. Experimental characterization of the local strain field in a heterogeneous elastoplastic material10.1016/0956-7151(94)90452-9 ↗
18. Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials10.1016/j.ijplas.2007.01.009 ↗
19. – Évolution récente du skin-pass des tôles minces [Recent developments in the temper rolling of thin sheets]10.1051/metal/199895070939 ↗
20. Pawelski · J. Mater. Process. Technol. · 1994 · 45 · 21510.1016/0924-0136(94)90343-3 ↗
21. Microscale plastic strain heterogeneity in slip dominated deformation of magnesium alloy containing rare earth10.1016/j.msea.2014.01.102 ↗
22. Plastic strain heterogeneities in an Mg-1Zn-0.5Nd alloy10.1016/j.scriptamat.2013.01.017 ↗