Mechanical property and serration behavior of Ti-based metallic glassy composites reinforced by an in-situ dendritic phase
Source abstract
Abstract
Abstract In-situ Ti-based metallic glassy composites (MGCs) were fabricated by the addition of minor amount of Nb element. Compared to their monolithic glassy counterparts, the composites exhibited high yielding strength and plasticity at 300 K, and were characterized by not only a work-hardening behavior but also serration flows on stress-strain curves. Detailed statistical analysis revealed a power-law distribution in compression causing the serration of the Ti-based MGCs. Moreover, the exponent of the power-law function (β) and the cut-off elastic energy density (∆δ) increased with the increase of the volume fraction of the dendrite, increasing the stability of the plastic flow. As a result, the composite accommodates large deformation by accommodating the applied energy and thus increases the plasticity. Multiply shear bands formed on the surface and numerous shear terraces on the fracture surface of the specimens, evidencing macroscopic plasticity. The composite displayed a combination of increased strength and plasticity at a cryogenic temperature due to the increased nucleation sites of shear-bands.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Metallic glasses from “alchemy” to pure science: present and future of design, processing and applications of glassy metals10.1016/j.matdes.2011.09.028 ↗
2. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
3. Mechanical properties of bulk metallic glasses and composites10.1557/jmr.2007.0050 ↗
4. The elastic properties, elastic models and elastic perspectives of metallic glasses10.1016/j.pmatsci.2011.07.001 ↗
5. Size effect on stability of shear-band propagation in bulk metallic glasses: an overview10.1007/s10853-011-5915-8 ↗
6. Effect of size and base-element on the jerky flow dynamics in metallic glass10.1016/j.actamat.2013.10.023 ↗
7. Designing metallic glass matrix composites with high toughness and tensile ductility10.1038/nature06598 ↗
8. Development of tough, low-density titanium-based bulk metallic glass matrix composites with tensile ductility10.1073/pnas.0809000106 ↗
9. Internal structural evolution and enhanced tensile plasticity of Ti-based bulk metallic glass and composite via cold rolling10.1016/j.jallcom.2014.01.075 ↗
10. Chaotic state to self-organized critical state transition of serrated flow dynamics during brittle-to-ductile transition in metallic glass10.1063/1.4941320 ↗
11. Effect of aspect ratio on the compressive deformation and fracture behavior of Zr-based bulk metallic glass10.1080/09500830500395237 ↗
12. Super plastic bulk metallic glasses at room temperature10.1126/science.1136726 ↗
13. Serration behavior of a Zr-based metallic glass under different constrained loading conditions10.1007/s11661-016-3685-2 ↗
14. Chaotic and power law turbulent states in jerky flow10.1238/Physica.Topical.106a00082 ↗
15. Breakdown of avalanche critical behavior in polycrystalline plasticity10.1038/nmat1393 ↗
16. Comparative study of the Portevin-Le Chatelier effect in interstitial and substitutional alloy10.1016/j.msea.2007.01.006 ↗
17. Composition mediated serration dynamics in Zrbased bulk metallic glasses10.1063/1.4935834 ↗
18. Multi-step shear banding for bulk metallic glasses at ambient and cryogenic temperatures10.1016/j.matchemphys.2012.06.033 ↗
19. Effects of cryogenic temperatures on mechanical behavior of a Zr60Ni25Al15 bulk metallic glass10.1016/j.msea.2013.06.063 ↗
20. Cryogenic temperature plasticity of a bulk amorphous alloy10.1016/j.actamat.2010.06.002 ↗
21. Stability of shear banding process in bulk metallic glasses and composites10.1557/jmr.2017.243 ↗
22. Consolidation behavior of Cu- and Ni-based bulk metallic glass composites10.1016/j.jallcom.2006.08.304 ↗
23. In-situ synthesis and mechanical properties of Zr-based bulk metallic glass matrix composites manipulated by nitrogen additions10.1016/j.intermet.2017.08.005 ↗
24. Fabrication and mechanical characterization of a series of plastic Zr-based bulk metallic glass matrix composites10.1016/j.matdes.2009.05.036 ↗
25. Novel Ti-based bulk metallic glasses with superior plastic yielding strength and corrosion resistance10.1016/j.msea.2015.05.060 ↗
26. Tuning plasticity of in-situ dendrite metallic glass composites via the dendrite-volume-fraction-dependent shear banding10.1016/j.msea.2016.10.085 ↗
27. Distribution of Be in a Ti-Based bulk metallic glass composite containing B-Ti10.1016/j.jmst.2016.03.025 ↗
28. Beryllium-distribution in metallic glass matrix composite containing beryllium10.1016/S1003-6326(17)60012-8 ↗
29. Calculations of Mixing Enthalpy and Mismatch Entropy for Ternary Amorphous Alloys10.2320/matertrans1989.41.1372 ↗
30. Plasticity of Ductile metallic glasses: a self-organized critical state10.1103/PhysRevLett.105.035501 ↗
31. Serrated flow kinetics in a Zr-based bulk metallic glass10.1016/j.intermet.2010.06.013 ↗
32. Serrated flow and stick-slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass10.1016/j.actamat.2012.04.013 ↗
33. Stick-slip dynamics and recent insights into shear banding in metallic glasses10.1557/jmr.2011.178 ↗
34. Quasi phase transition model of shear bands in metallic glasses10.1016/j.actamat.2011.08.002 ↗
35. Localized heating and fracture criterion for bulk metallic glasses10.1557/jmr.2006.0124 ↗
36. Temperature rise at shear bands in metallic glasses10.1038/nmat1536 ↗
37. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
38. Mean stress effects on flow localization and failure in a bulk metallic glass10.1016/S1359-6454(01)00125-2 ↗