Mechanisms of void formation during uniaxial tensile testing in a low-temperature-aged U-Nb alloy
Source abstract
Abstract
Abstract The microstructure and damage accumulation of a U-5.5Nb alloy aged at a low temperature were analysed as a function of strain. Four tensile tests were performed and interrupted at different strain levels to investigate the mechanisms of void nucleation, growth and coalescence via optical microscopy, scanning electron microscopy with energy dispersive X-ray spectroscopy, X-ray diffraction and nanoindentation measurements. The results show that voids first nucleate at U(N,C) inclusions at a low strain because they crack due to their low strength. Meanwhile, the higher strength of the Nb2C inclusion than that of matrix does not lead to the fracturing of Nb2C inclusions. However, with the further increasing strain, voids nucleate via the decohesion of the Nb2C-matrix interface because of the mismatch between the strengths of the Nb2C inclusion and matrix. In clusters comprising both Nb2C and U(N,C) inclusions, void formation mechanisms are determined by the Nb2C and U(N,C) inclusions. In addition, in clusters, the weak adhesion between Nb2C and U(N,C) inclusions causes separation. Based on experimental observations, an illustration of failure mechanisms is presented for a low-temperature-aged U-5.5Nb alloy with a single α′′ phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Effect of niobium element on the electrochemical corrosion behavior of depleted uranium10.1016/j.jnucmat.2016.05.035 ↗
2. The effects of microstr ucture on the hydriding for 500 ℃/2 h aged U-13 at%Nb alloy10.1016/j.jnucmat.2017.03.014 ↗
3. Effects of natural aging on the tensile properties of water-quenched U-6%Nb alloy10.1016/j.jnucmat.2004.01.014 ↗
4. The effect of quench rate on the microstructure, mechanical properties, and corrosion behavior of U-6 wt pct Nb10.1007/BF02648560 ↗
5. Hackenberg · 2007
6. Low temperature age hardening in U-13 at% Nb: an assessment of chemical redistribution mechanisms10.1016/j.jnucmat.2009.06.025 ↗
7. X-ray diffraction analyses of aged U-Nb alloys10.1016/j.jallcom.2006.11.089 ↗
8. Phases metastables dans les alliages uranium-niobium10.1016/0022-3115(64)90122-9 ↗
9. Sun · 2005
10. Texture development and deformation mechanisms during uniaxial straining of U-Nb shape-memory alloys10.1080/14786430500036314 ↗
11. EBSD and FIB/TEM examination of shape memory effect deformation structures in U-14 at% Nb10.1016/j.actamat.2008.02.008 ↗
12. Neutron diffraction study of the deformation mechanisms of the uranium-7 wt% niobium shape memory alloy10.1016/j.msea.2005.10.001 ↗
13. Martensitic structures and deformation twinning in the U-Nb shape-memory alloys10.1080/01418610010010971 ↗
14. Large Strain Deformation in Uranium 6 Wt Pct Niobium10.1007/s11661-011-0931-5 ↗
15. A phenomenological study of the shape memory effect in polycrystalline uranium-niobium alloys10.1007/BF02648337 ↗
16. Uniaxial tensile deformation of uranium 6 wt pct niobium: a neutron diffraction study of deformation twinning10.1007/s11661-001-0197-4 ↗
17. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
18. Micromechanics of room and high temperature fracture in 6xxx Al alloys10.1016/j.pmatsci.2006.06.001 ↗
19. Void nucleation by inclusion cracking10.1007/s11661-004-0083-y ↗
20. Martensite-ferrite interface strength in a low-carbon bainitic steel10.1016/j.scriptamat.2005.09.012 ↗
21. Chen · Mater. Sci. Technol. · 2018 · 34 · 1210.1080/02670836.2017.1319117 ↗
22. Metallographic preparation techniques for U-6 wt%Nb10.1016/j.jnucmat.2012.05.013 ↗
23. Role of TiN inclusion on corrosion fatigue behavior of Alloy 690 steam generator tubes in borated and lithiated high temperature water10.1016/j.corsci.2014.07.059 ↗
24. The effect of strain rate on the tensile flow and fracture of α-Uranium10.1016/0022-3115(80)90063-X ↗
25. Influence of carbon on the tensile properties of U-0.1 wt%Cr10.1023/A:1015461022009 ↗
26. Strum · 1993
27. Determination of the mechanical properties of inclusions and matrices in α-U and aged U-5.5Nb alloy by nanoindentation measurements10.1088/2053-1591/aa9864 ↗
28. Experimental characterization and numerical modeling of micromechanical damage under different stress states10.1016/j.matdes.2013.02.075 ↗
29. Characterization of fracture in medium Mn steel10.1016/j.msea.2017.01.055 ↗
30. Mechanisms of void formation during tensile testing in a commercial, dual-phase steel10.1016/j.actamat.2010.12.039 ↗
31. Poruks · 2004
32. Effect of martensite distribution on damage behaviour in DP600 dual phase steels10.1016/j.msea.2009.03.055 ↗
33. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
34. The effect of low-temperature aging on the microstructure and deformation of uranium- 6 wt% niobium: an in-situ neutron diffraction study10.1016/j.jnucmat.2016.09.004 ↗
35. Thermodynamic modeling of the U-Mn and U-Nb systems10.1016/j.jnucmat.2008.07.008 ↗
36. The influence of the carbon addition on the microstructure of a U-Nb alloy and the features of Nb2C inclusions10.1051/metal/2017098 ↗
37. Void nucleation and growth in dual-phase steel 600 during uniaxial tensile testing10.1007/s11661-009-0030-z ↗
38. Effects of non-metallic inclusions on machinability of free-cutting steels investigated by nano-indentation measurements10.1007/s11661-014-2596-3 ↗
39. Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measurements10.1016/j.actamat.2004.08.002 ↗
40. Cavity formation from inclusions in ductile fracture10.1007/BF02672306 ↗
41. The nucleation of cavities by plastic deformation10.1016/0001-6160(79)90051-8 ↗
42. The work-hardening of copper-silica V. Equilibrium plastic relaxation by secondary dislocations10.1080/14786437608222028 ↗
43. A model of ductile fracture based on the nucleation and growth of voids10.1016/0001-6160(81)90185-1 ↗
44. Ductile fracture of mechanically alloyed iron-yttria alloys10.1007/BF02656636 ↗
45. Development of a three-dimensional model for ductile fracture in materials containing two types of microvoids10.2355/isijinternational.39.352 ↗
46. Interfacial decohesion around spheroidal carbide particles10.1016/S0036-9748(88)80123-6 ↗
47. On the ductile enlargement of voids in triaxial stress fields10.1016/0022-5096(69)90033-7 ↗
48. L.M. Brown, J.D. Embury, Proceedings of the 3rd International Conference on the Strength of Metals and Alloys, Institute of Metals, London, 1973.