Ni-Cr-Ta-Al-C complex phase alloy – Design, microstructure and properties
Source abstract
Abstract
Abstract In this paper, the concept, microstructure and properties of the Ni-Cr-Ta-Al-C complex phase alloy are presented. The alloy was designed to work at elevated temperatures, in a chemically aggressive environment and under harsh wear conditions. The alloy was examined in an as-cast state and after heat treatment using a number of complementary techniques such as: scanning electron microscopy, 3D reconstruction by means of focused ion beam-scanning electron microscopy, transmission electron microscopy, X-ray diffraction, nanoindentation, dilatometry, hardness measurements and in-situ tensile tests at elevated temperatures. The microstructure of the alloy is comprised of a dendritic chromium-rich nickel-based matrix, which is strengthened by spheroidal precipitations of the γ’ Ni3(AlTa) phase as well as Chinese script-like TaC and Cr7C3 carbides. Analysing hardness and microstructural changes of the alloy after solution treatment and after aging in different conditions allows to optimise the alloy's heat treatment procedure. It was found that the alloy achieved the highest hardness values after aging at 800 °C, which is related with the evolution of the γ’ phase. Additionally, it was discovered that primary carbides are stable up to at least 1150 °C, which is promising from the viewpoint of working at elevated temperatures and under harsh wear conditions. The herein reported results show that the combination of eutectic carbides and ordered γ’ phase for strengthening and, possibly, improving wear resistance of the alloy is effective up to at least 850 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High Temperature Alloys and Creep · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Davies · 1997
2. Roberts · 1998
3. S i n ha · 2003
4. The microstructure changes in high-speed steels during continuous heating from the as-quenched state
5. Reed · 2006
6. Donachie M.J · 2008
7. Alloys-by-design: application to nickel-based single crystal superalloys10.1016/j.actamat.2009.08.018 ↗
8. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
9. Thermal fatigue testing of Inconel 617 and Stellite 6 alloys as potential tooling materials for thixoforming of steels10.1016/j.msea.2009.11.021 ↗
10. M. Koori, M. Morishita, K. Yoshikawa, O. Tsuda, Nickel-based Heat-resistant Alloy for Dies, EP0460678, 1991.
11. Effect of precipitated carbides on the fretting wear behavior of Inconel 600 alloy10.1016/j.wear.2014.03.012 ↗
12. Blau · 1997
13. Carbon additions and grain defect formation in high refractory nickel-base single crystal superalloys
14. Influence of Cr23C6 carbides on dynamic recrystallization in hot deformed Nimonic 80a alloys10.1016/S0921-5093(03)00329-0 ↗
15. The effects of carbon content on the microstructure and elevated temperature tensile strength of a nickel-base superalloy10.1016/j.msea.2010.03.053 ↗
16. Creep and oxidation kinetics at 1100°C of nickel-base alloys reinforced by hafnium carbides10.1016/j.matdes.2016.04.079 ↗
17. Effect of carbon additions on the microstructure in a Ni-base single crystal superalloy10.1016/j.matlet.2004.01.038 ↗
18. Durand-Charre · 1997
19. Effects of tantalum on the temporal evolution of a model Ni–Al–Cr superalloy during phase decomposition10.1016/j.actamat.2008.10.029 ↗
20. The role of hafnium in the formation of misoriented defects in Ni-based superalloys: an atom-probe tomographic study10.1016/j.actamat.2011.02.006 ↗
21. Effect of solidi fi cation condition and carbon content on the morphology of MC carbide in directionally solidified nickel-base superalloys10.1016/j.jmst.2014.06.010 ↗
22. Effect of solidification rate on MC-type carbide morphology in single crystal Ni-base superalloy AM310.1016/S1003-6326(09)60382-4 ↗
23. Microstructural and mechanical characterization of injection molded 718 superalloy powders10.1016/j.jallcom.2013.04.042 ↗
24. Effect of cooling rate on MC carbide in directionally solidified nickel-based superalloy under high thermal gradient
25. Effect of alloying chemistry on MC carbide morphology in modified RR2072 and RR2086 SX superalloys10.1016/S1359-6462(02)00266-X ↗
26. Effect of minor alloying additions on the solidification of single-crystal Ni-base superalloys10.1016/j.jcrysgro.2009.05.002 ↗
27. Roles of Zr and Y in cast microstructure of M951 nickel-based superalloy10.1016/S1003-6326(11)61361-7 ↗
28. Effects of melt treatment on the cast structure of M963 superalloy10.1016/S1359-6462(02)00446-3 ↗
29. Injection molding of nickel based 625 superalloy: sintering, heat treatment, microstructure and mechanical properties10.1016/j.jallcom.2012.08.069 ↗
30. Effect of melt treatment on carbides formation in a cast nickel-base superalloy M96310.1016/j.jmatprotec.2006.11.002 ↗
31. Effect of long time service exposure on microstructure and mechanical properties of gas turbine vanes made of IN939 alloy10.1016/j.matdes.2014.08.035 ↗
32. Effects of carbides and its evolution on creep properties of a directionally solidified nickel-based superalloy10.1016/j.msea.2015.02.056 ↗
33. Experimental and thermodynamic study of the high temperature microstructure of tantalum containing nickel-based alloys10.1016/j.calphad.2004.07.005 ↗
34. Causes of failure and repairing options for dies and molds: a review10.1016/j.engfailanal.2013.09.006 ↗
35. Temperature profiles and conditions for thermal fatigue cracking in brass die casting dies10.1016/j.jmatprotec.2004.04.241 ↗
36. Thermal fatigue testing of chromium martensitic hot-work tool steel after different austenitizing treatments10.1016/j.jmatprotec.2004.04.158 ↗
37. A review on remanufacture of dies and moulds10.1016/j.jclepro.2013.09.014 ↗
38. Improved diffusion-resistant ability of multicomponent nitrides: from unitary TiN to senary high-entropy (TiTaCrZrAlRu)N10.1007/s11837-013-0676-2 ↗
39. Formation and progression of die soldering during high pressure die casting10.1016/j.msea.2005.02.057 ↗
40. Surface & coatings technology microstructural and microchemical characterization of Ni-Ta-Al-Cr-C coating layer on austenitic stainless steel AISI 31010.1016/j.surfcoat.2015.08.060 ↗
41. The γ ′ -Ni 3 (Al, Ta) phase triggered strengthening of the Ni-Ta-Al-Cr-C coating layer, deposited on austenitic stainless steel10.1016/j.matchar.2017.05.028 ↗
42. The effect of temperature on the evolution of eutectic carbides and M7C3/ M23C6 carbides reaction in the rapidly solidified Fe-Cr-C alloy10.1016/j.jallcom.2016.12.252 ↗
43. Formation of eutectic carbides in Fe – Cr – Mo – C alloy during non-equilibrium crystallization10.1016/j.matdes.2016.01.028 ↗
44. Magnetic detection of chromium depleted regions in metastable Fe-Cr-C alloy10.1016/j.matchar.2017.08.030 ↗
45. Simulation of the solidification of CMSX-410.1016/j.msea.2005.02.056 ↗
46. Partitioning and diffusion of transition metal solutes in ternary model Ni- based single crystal superalloys10.1016/j.matdes.2017.05.032 ↗
47. Insight into γ-Ni/γ’-Ni3Al interfacial energy affected by alloying elements10.1016/j.matdes.2017.07.028 ↗
48. Temperature dependence of MC decomposition behavior in Ni-base superalloy GTD 11110.1016/j.msea.2007.06.010 ↗
49. Okamoto · 2016