journal article·2017-09

Strengthening behaviors of V and W modified Cr19 series duplex stainless steels with transformation induced plasticity

Huawei Zhang, Yulai Xu, Pengfei Hu, Wanjian Xu, Jun Li, Kunfang Li, Xueshan Xiao

Publisher page

Abstract

Abstract The V and W modified Cr19 series duplex stainless steels with transformation induced plasticity (TRIP) have been newly developed and the effects of microstructures on room temperature mechanical properties have been investigated. The addition of ferrite forming elements V and W slightly increases the volume fraction of ferrite phase from about 55% to 57–60%, however, the cold rolling process hardly influence the fraction. When the duplex phases exhibit a coarse banding morphology before cold rolling, the ultimate tensile strength and elongation are improved significantly with the addition of V and W elements mainly due to the occurrence of TRIP effect. The ultimate tensile strength and yield strength of Cr19+V increase very slightly, but the elongation increases to about 61% after cold rolling. Both the ultimate tensile strength and elongation of Cr19+W significantly increase to about 800 MPa and 67%, respectively. The improvement is attributed to TRIP effect and refinement of banded ferrite and austenite phases. After aging heat treatment, the precipitate of VN and Cr23C6 particles contributes to the further increase of ultimate tensile strength to about 1000 and 920 MPa of Cr19+V and Cr19+W DSSs, respectively. Strain induced αʹ-martensite is transformed from austenite directly with an orientation relationship. The strengthening behaviors have been discussed based on the microstructural evolutions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Investigation on microstructure evolution and properties of duplex stainless steel joint multi-pass welded by using different methods10.1016/j.matdes.2016.07.110 ↗
2. Deformation induced austenite formation in as-cast 2101 duplex stainless steel and its effect on hot-ductility10.1016/j.msea.2016.02.067 ↗
3. Effects of ferrite content on the mechanical properties of thermal aged duplex stainless steels10.1016/j.msea.2014.11.065 ↗
4. Microstructural evolution and mechanical properties of duplex TRIP steel produced by strip casting10.1016/j.msea.2017.03.064 ↗
5. Evolution of microstructure and mechanical properties in a cold deformed nitrogen bearing TRIP-assisted duplex stainless steel after reversion annealing10.1016/j.msea.2016.10.105 ↗
6. Effect of heat treatment on transformation-induced plasticity of economical Cr19 duplex stainless steel10.1016/j.matdes.2013.12.019 ↗
7. Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability10.1016/j.actamat.2011.04.011 ↗
8. Effect of austenitic texture on tensile behavior of lean duplex stainless steel with transformation induced plasticity (TRIP)10.1016/j.msea.2016.11.001 ↗
9. Effect of different Mn contents on tensile and corrosion behavior of CD4MCU cast duplex stainless steels10.1016/j.msea.2005.01.046 ↗
10. Investigation on the solution treated behavior of economical 19Cr duplex stainless steels by Mn addition10.1016/j.matdes.2015.05.052 ↗
11. Effects of nitrogen content on TRIP of Fe-20Cr-5Mn-xN duplex stainless steel10.1016/j.msea.2011.12.025 ↗
12. A new series of Mo-free 21.5Cr-3.5Ni-xW-0.2N economical duplex stainless steels10.1016/S1006-706X(14)60011-X ↗
13. Effect of volume fraction of phases and precipitates on the mechanical behavior of UNS S31803 duplex stainless steel10.1016/j.ijfatigue.2014.12.015 ↗
14. Effect of solidification mode and morphology of microstructure on the hydrogen content of duplex stainless steel weld metal10.1016/S0261-3069(03)00169-9 ↗
15. Microstructural evolution and mechanical properties of the stir zone in friction stir processed AISI201 stainless steel10.1016/j.matdes.2016.05.106 ↗
16. Effect of solution treatment on the transformation behaviour of cold-rolled duplex stainless steels10.1016/0921-5093(95)09863-1 ↗
17. Simulation of rolling textures of b.c.c metals considering grain interactions and crystallographic slip on {110}, {112} and {123} planes10.1016/0921-5093(94)09770-4 ↗
18. On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels10.1016/S1359-6454(03)00117-4 ↗
19. On the transitions of deformation modes of fully austenitic steels at room temperature10.1007/s12540-010-0001-3 ↗
20. GB/T 229-2007 · 2007
21. GB/T 228.1-2010 · 2010
22. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
23. Effects of aging at 475°C on corrosion properties of tungsten-containing duplex stainless steels10.1016/S0010-938X(02)00079-3 ↗
24. Influence of annealing temperature on deformation behavior of 329LA lean duplex stainless steel10.1016/j.msea.2016.10.062 ↗
25. Effect of annealing temperature on transformation induced plasticity effect of a lean duplex stainless steel10.1016/j.matchar.2013.02.003 ↗
26. The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe-9Mn-0.05C steel10.1016/j.actamat.2014.07.005 ↗
27. The effects of the heating rate on the reverse transformation mechanism and the phase stability of reverted austenite in medium Mn steels10.1016/j.actamat.2013.12.038 ↗
28. The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel10.1016/j.actamat.2016.04.038 ↗
29. Transformation kinetics and density models of quenching and partitioning (Q&P) steels10.1016/j.actamat.2015.11.051 ↗
30. Carbon partitioning into austenite after martensite transformation10.1016/S1359-6454(03)00059-4 ↗
31. Strain induced martensitic transformation of Fe-20Cr-5Mn-0.2Ni duplex stainless steel during cold rolling: effects of nitrogen addition10.1016/j.msea.2011.04.038 ↗
32. TRIP aided deformation of a near-Ni-free, Mn-N bearing duplex stainless steel10.1016/j.msea.2011.12.037 ↗
33. In situ microscopic observations of low-cycle fatigue-crack propagation in high-Mn austenitic alloys with deformation-induced ε-martensitic transformation10.1016/j.actamat.2016.04.042 ↗
34. Precipitation behavior of V-N Microalloyed steels during normalizing10.1016/S1006-706X(15)30109-6 ↗
35. Effects of quenching-partitioning-tempering treatment on microstructure and mechanical performance of Nb-V-Ti microalloyed ultra-high strength steel10.1016/j.msea.2017.03.020 ↗
36. Creep and microstructural processes in a low-alloy 2.25%Cr1.6%W steel (ASTM Grade 23)10.1016/j.matchar.2015.08.008 ↗
37. Effect of W and Ta on creep-fatigue interaction behavior of reduced activation ferritic-martensitic (RAFM) steels10.1016/j.fusengdes.2015.06.191 ↗
38. A new resource-saving, low chromium and low nickel duplex stainless steel 15Cr-xAl-2Ni-yMn10.1016/j.matdes.2013.06.043 ↗
39. Pecker · 1977