Microstructure evolution and room temperature fracture toughness of directionally solidified NiAl–31Cr3Mo–0.2Si near-eutectic alloy at different withdrawal rates
Source abstract
Abstract
Abstract The microstructure evolution and room temperature fracture toughness of directionally solidified NiAl–31Cr3Mo–0.2Si (at%) near-eutectic alloy at different withdrawal rates were investigated. The results showed that NiAl dendrites were eliminated and fully eutectic structure was achieved by applying appropriate withdrawal rates. The microstructure evolved from planar eutectic to primary NiAl dendrites + cellular eutectic and then to dendritic eutectic with the increasing withdrawal rate. Correspondingly, the interlamellar spacing and cell size decreased gradually. The relationship between eutectic interlamellar spacing with withdrawal rate can be summarized as λ = 4.74 V − 0.38 . The fracture toughness of alloys with fully eutectic structure was much higher than that of alloys with NiAl dendrites. It increased up to 2.5 times. The high fracture toughness may be attributed to some toughening mechanisms, such as crack bridging, crack deflection, interface debonding and microcrack linkage. The existence of primary dendrites would seriously deteriorate the fracture toughness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Solidification and crystal growth phenomena · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Physical and mechanical properties of the B2 compound NiAl10.1179/imr.1993.38.4.193 ↗
2. The physical and mechanical properties of NiAl10.1016/0956-7151(93)90001-9 ↗
3. NiAl alloys for high-temperature structural applications10.1007/BF03220163 ↗
4. Microstructure and mechanical behavior of in-situ directional solidified NiAl/Cr(Mo) eutectic composite10.1016/S1359-6454(96)00124-3 ↗
5. Brittle fracture and grain boundary chemistry of microalloyed NiAl10.1557/JMR.1990.0754 ↗
6. Effect of alloying on physical properties of NiAl
7. Effect of alloying additions on β′ precipitation in NiAl-Ti base alloys10.1016/S1359-6454(01)00183-5 ↗
8. Investigation of NiAl-TiB2 in situ composites10.1557/JMR.1997.0151 ↗
9. Synthesis of NiAl-TiC nanocomposite by mechanical alloying elemental powders10.1016/S0921-5093(98)00576-0 ↗
10. The effect of alloy additions on the rod-plate transition in the eutectic NiAl–Cr10.1007/BF03037830 ↗
11. Structures, faults, and the rod-plate transition in eutectics10.1007/BF02662656 ↗
12. Processing and mechanical properties of in-situ composites from the NiAl-Cr and the NiAl-(Cr,Mo) eutectic systems10.1016/0966-9795(95)92674-O ↗
13. Phase-specific deformation behavior of a relatively tough NiAl-Cr(Mo) lamellar composite10.1016/j.scriptamat.2014.04.025 ↗
14. Microstructures and mechanical properties of a directionally solidified NiAl-Mo eutectic alloy10.1016/j.actamat.2004.09.003 ↗
15. NiAl alloys for turbine airfoils
16. Microstructure and phase stability of single crystal NiAl alloyed with Hf and Zr10.1557/JMR.1996.0384 ↗
17. Ductility and fracture toughness issues related to implementation of NiAl for gas turbine applications10.1016/S0966-9795(00)00081-9 ↗
18. Effects of minor alloying additions on the microstructure, toughness, and creep strength of directionally solidified NiAl-31Cr-3Mo
19. Microstructure, creep and fracture toughness of directionally solidified NiAl/(Cr,Mo) alloys modified with Hf, Si, Ta, Ti additions
20. Microstructure of a eutectic NiAl-Mo alloy directionally solidified using an industrial scale and a laboratory scale Bridgman furnace10.3139/146.110632 ↗
21. Stefanescu · 2015
22. Effect of withdrawal rate on the microstructure of directionally solidified NiAl-Cr(Mo) hypereutectic alloy10.1016/j.intermet.2011.10.018 ↗
23. Effect of microstructures on the room temperature fracture toughness of NiAl-32Cr-6Mo hypereutectic alloy directionally solidified at different withdrawal rates10.1016/j.msea.2014.05.090 ↗
24. Effect of a high magnetic field on microstructures of Ni-based superalloy during directional solidification10.1016/j.jallcom.2014.09.114 ↗
25. Lamellar and rod eutectic growth, Trans
26. Kurz · 1998
27. The dendrite-eutectic transition in Sn-Pb alloys
28. The extent of the eutectic range10.1016/0022-0248(74)90178-X ↗
29. Directional solidification of eutectic and off-eutectic Au-Co composites with and without magnetic field10.1007/BF02403273 ↗
30. Fracture toughness of NiAl and NiAl-based composites10.1016/0956-7151(92)90419-F ↗
31. Effect of Ho on the microstructure and compressive properties of NiAl-based eutectic alloy10.1016/j.matlet.2008.05.038 ↗
32. Effect of directionally solidified microstructures on the fracture-toughness properties of NiAl-33Cr-1Mo and NiAl-31Cr-3Mo grown at different solidification rates10.1007/s11661-002-0122-5 ↗
33. Phase-specific deformation behavior of a NiAl-Cr (Mo) lamellar composite under thermal and mechanical loads10.1016/j.jallcom.2015.09.265 ↗
34. The fracture resistance of directionally solidified dual-phase NiAl reinforced with refractory metals10.1016/0956-7151(93)90079-8 ↗
35. Plasticity in multiphase intermetallics10.1016/S0966-9795(00)00079-0 ↗
36. Deformation and fracture of a directionally solidified NiAl-28Cr-6Mo eutectic alloy10.1557/JMR.1995.1159 ↗
37. The mechanics of crack growth in layered materials, Acta Metal
38. Microstructure, interface and mechanical property of the DS NiAl-Cr(Mo, Hf) composite10.1016/S0966-9795(01)00009-7 ↗
39. High temperature compressive properties and room temperature fracture toughness of directionally solidified NiAl-based eutectic alloy10.1016/j.matdes.2008.08.023 ↗