journal article·2002-05

Dislocation glide and grain boundary decohesion in polycrystalline molybdenum disilicide during plastic deformation

L. Junker, M. Bartsch, U. Messerschmidt

Materials Science and Engineering: A· Volume 328· Issue 1-2
Publisher page

Abstract

Molybdenum disilicide polycrystals were deformed in constant strain rate tests in compression followed by analyses of the deformed specimens by means of optical microscopy and scanning and transmission electron microscopy. The strain rate sensitivity was measured by stress relaxation tests. Using a low strain rate of 2.5 × 10 − 7 s − 1 , it was possible for the first time to achieve plastic flow at low-temperatures down to 495 °C and thus in the temperature range of the flow stress anomalies of different slip systems in single crystals. In addition, in situ straining experiments in a high-voltage electron microscope were performed to observe the deformation processes directly. The deformation is controlled by dislocation glide on the {0 1 1} 100 and {1 10 } 111 slip systems below 1000 °C, however, by visco-elastic grain boundary glide and decohesion above this temperature. © 2002 Elsevier Science B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Vasudévan · Mat. Sci. Eng. · 1992 · A155 · 110.1016/0921-5093(92)90308-N ↗
2. Ito · Intermetallics · 1996 · 4 · 11910.1016/0966-9795(96)00030-1 ↗
3. Maloy · Acta Metall. Mater. · 1995 · 43 · 65710.1016/0956-7151(94)00260-O ↗
4. Ghosh · Mat. Res. Soc. Symp. Proc. · 1994 · 322 · 21510.1557/PROC-322-215 ↗
5. Chang · Mat. Res. Soc. Symp. Proc. · 1994 · 322 · 22310.1557/PROC-322-223 ↗
6. Hardwick · Mat. Res. Soc. Symp. Proc. · 1994 · 322 · 20910.1557/PROC-322-209 ↗
7. Junker · Mat. Res. Soc. Symp. Proc. · 1999 · 552 · KK5.23.110.1557/PROC-552-KK5.23.1 ↗
8. Messerschmidt · Ultramicroscopy · 1994 · 56 · 16310.1016/0304-3991(94)90155-4 ↗
9. Sharif · Scripta Mater. · 2001 · 44 · 87910.1016/S1359-6462(00)00698-9 ↗
10. Inui · Intermetallics · 2000 · 8 · 113110.1016/S0966-9795(00)00049-2 ↗
11. Guder · Mater. Sci. Eng. · 1999 · A261 · 13910.1016/S0921-5093(98)01059-4 ↗
12. Groves · Phil. Mag. · 1963 · 8 · 87710.1080/14786436308213843 ↗
13. S. Guder, Doctoral Thesis, Martin-Luther-Universität Halle/Wittenberg, 2000.
14. Messerschmidt · Mater. Sci. Eng. A · 2001 · 319–321 · 34210.1016/S0921-5093(01)01101-7 ↗
15. Messerschmidt · Intermetallics · 1998 · 6 · 72910.1016/S0966-9795(98)00051-X ↗
16. Messerschmidt · Mat. Res. Soc. Symp. Proc. · 1999 · 552 · KK10.9.110.1557/PROC-552-KK10.9.1 ↗
17. Messerschmidt · Mat. Res. Soc. Symp. Proc. · 2001 · 646 · Y11.6.1
18. Sadananda · Ceram. Eng. Sci. Proc. · 1991 · 12 · 167110.1002/9780470313848.ch5 ↗
19. Feng · Mat. Res. Symp. Proc. · 1995 · 364 · 105310.1557/PROC-364-1053 ↗
20. Bose · Mater. Sci. Eng. · 1992 · A155 · 21710.1016/0921-5093(92)90328-X ↗
21. Matsuda · Intermetallics · 1998 · 6 · 39510.1016/S0966-9795(97)00082-4 ↗
22. Baskes · Mater. Sci. Eng. · 1999 · A261 · 16510.1016/S0921-5093(98)01062-4 ↗
23. Hutchinson · Acta Metall. · 1983 · 31 · 107910.1016/0001-6160(83)90204-3 ↗
24. Riedel · 1987
25. H. Riedel, Fracture Mechanics, Habilitationsschrift, Scientific Report W 3/92, Fraunhofer Institut für Werkstoffmechanik, Freiburg 1992.