journal article·2006-08

Experimental validation of FE predicted fracture behaviour in thermally sprayed coatings

P. Bansal, P.H. Shipway, S.B. Leen, L.C. Driver

Materials Science and Engineering: A· Volume 430· Issue 1-2
Publisher page

Abstract

Abstract The fracture behaviour of a brittle coating on a substrate is not only governed by its intrinsic fracture strength, but also by a range of other parameters. In order to be able to understand (and thus predict) the fracture response, it is very important to accurately determine the key coating properties such as elastic modulus, residual stresses and fracture strength. In the present work, the fracture behaviour of three different high velocity oxy-fuel (HVOF) sprayed WC–17% Co coatings on Ti–6Al–4V substrates was studied using four-point bending with the acoustic emission technique. The key coating properties were determined experimentally and finite element (FE) models incorporating these experimentally measured properties were used to predict the cracking behaviour. It was found that the FE model was able to predict the differences in the fracture responses of the three coating types based upon differences in their mechanical properties, which in turn enabled the properties which dominate the fracture response to be identified. Moreover, the ability to predict the fracture behaviour of the coatings provided validation of the physical basis of the FE model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. L.C. Driver, P.H. Shipway, D.G. McCartney, L.A. Donohue, D.S. Rickerby, in: B.R. Marple, C. Moreau (Eds.), Proc. Int. Therm. Spray Conf., (2003) 801–807.
2. Dalmas · Surf. Coat. Technol. · 2003 · 173 · 13010.1016/S0257-8972(03)00464-X ↗
3. Miguel · Mater. Sci. Eng. · 2003 · A352 · 5510.1016/S0921-5093(02)00546-4 ↗
4. Bouaricha · J. Therm. Spray Technol. · 2004 · 13 · 40510.1361/10599630419328 ↗
5. Bansal · Surf. Coat. Technol. · 2006 · 200 · 531810.1016/j.surfcoat.2005.06.015 ↗
6. Berndt · J. Mater. Sci. · 1989 · 24 · 351110.1007/BF02385733 ↗
7. Lin · Surf. Coat. Technol. · 1998 · 102 · 110.1016/S0257-8972(97)00531-8 ↗
8. McGrann · J. Therm. Spray Technol. · 1998 · 7 · 54610.1361/105996398770350774 ↗
9. L.C. Driver, HVOF spraying of WC–Co & MCrAlY coatings for aeroengine components. Ph.D thesis, The University of Nottingham, 2004.
10. Popov · 1976
11. Kucuk · Mater. Sci. Eng. · 2000 · A284 · 2910.1016/S0921-5093(00)00799-1 ↗
12. Culity · 2001
13. Lei · Int. J. Fract. · 2000 · 106 · 19510.1023/A:1026574400858 ↗
14. Tetelman · 1973
15. Pejyrd · J. Therm. Spray · 1995 · 4 · 26810.1007/BF02646970 ↗
16. Stewart · Acta Mater. · 2000 · 48 · 159310.1016/S1359-6454(99)00440-1 ↗
17. Sudaprasert · Wear · 2003 · 255 · 94310.1016/S0043-1648(03)00293-X ↗
18. S. Bouaricha, B.R. Marple, Proc. Int. Therm. Spray Conf., (2004) 516–524.10.31399/asm.cp.itsc2004p0516 ↗
19. Verdon · Mater. Sci. Eng. · 1998 · A246 · 1110.1016/S0921-5093(97)00759-4 ↗
20. Stewart · Wear · 1999 · 225–229 · 78910.1016/S0043-1648(99)00032-0 ↗
21. Bansal · Acta Mater. · 2003 · 51 · 295910.1016/S1359-6454(03)00109-5 ↗
22. Richard · Surf. Coat. Technol. · 1996 · 78 · 28410.1016/0257-8972(95)02416-6 ↗
23. Stokes · Surf. Coat. Technol. · 2003 · 177–178 · 18
24. Clyne · J. Therm. Spray Technol. · 1996 · 5 · 40110.1007/BF02645271 ↗
25. Wenzelburger · Surf. Coat. Technol. · 2004 · 180–181 · 42910.1016/j.surfcoat.2003.10.125 ↗
26. Pina · Mater. Sci. Eng. · 2003 · A347 · 2110.1016/S0921-5093(02)00580-4 ↗
27. Pawlowski · 1995
28. Wood · 1972