journal article·2023-07

Micropillar compression investigation on the mechanical behavior of Ni manufactured using laser powder bed fusion

Shi-Hao Li, Yakai Zhao, Kwang Boon Lau, Pei Wang, Ramamurty Upadrasta

Publisher page

Abstract

Micropillar compression tests were performed on unalloyed Ni that was manufactured using the additive manufacturing (AM) technique of laser powder bed fusion (LPBF) with micropillar diameters ranging from 1 to 3.5 μm. In all cases, the single crystalline micropillars with the <110> crystallographic orientation, aligned along the build direction of LPBF and the uniaxial compression axis, are tested. In contrast to other LPBF alloys, in which submicron-scale cellular structures decorated with dense dislocation networks are often reported, only dislocation networks with relatively sparse dislocations along the network boundaries are observed in the LPBF Ni. Results of the micropillar compression tests show that the stress-strain responses of the LPBF Ni in the plastic regime are dominated by pronounced serrations and both the yield strength and work hardening behavior are highly dependent on the pillar diameter. Microscopic observations on the deformed pillars show that that the relatively low-density of dislocations in the microstructure of the LPBF Ni do not offer a substantial resistance to the dislocation motion. This is further verified by comparing the mechanical performance of the micropillars of the LPBF Ni with those of the pre-strained Ni, nanocrystalline Ni and 316L stainless steel manufactured via the directed energy deposition AM technique.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Directed energy deposition of metals: processing, microstructures, and mechanical properties10.1080/09506608.2022.2097411 ↗
2. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
3. About metastable cellular structure in additively manufactured austenitic stainless steels
4. Fracture and fatigue in additively manufactured metals10.1016/j.actamat.2021.117240 ↗
5. Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V10.1016/j.actamat.2018.05.044 ↗
6. Role of the solidification cells on the yield strength of the Al-Si-Mg alloy manufactured using laser powder bed fusion: a micropillar compression study10.1016/j.scriptamat.2023.115566 ↗
7. Mesostructure engineering in additive manufacturing of alloys10.1016/j.scriptamat.2023.115429 ↗
8. Selective laser melting of Fe–Al alloys with simultaneous gradients in composition and microstructure10.1016/j.msea.2021.141608 ↗
9. Resolving the porosity-unmelted inclusion dilemma during in-situ alloying of Ti34Nb via laser powder bed fusion10.1016/j.actamat.2020.116522 ↗
10. 3D printing of ductile equiatomic Fe-Co alloy for soft magnetic applications
11. Compositionally graded AlxCoCrFeNi high-entropy alloy manufactured by laser powder bed fusion10.1016/j.mtla.2021.101308 ↗
12. Compositionally graded CoCrFeNiTix high-entropy alloys manufactured by laser powder bed fusion: a combinatorial assessment10.1016/j.jallcom.2021.160825 ↗
13. Multi-scale microstructural investigation of a laser 3D printed Ni-based superalloy
14. Additive manufacturing of tungsten, tungsten-based alloys, and tungsten matrix composites10.1007/s42864-022-00153-6 ↗
15. Effect of heat treatment on the microstructure and mechanical properties of 2.4 GPa grade maraging steel fabricated by laser powder bed fusion
16. Effect of initial dislocation density on the plastic deformation response of 316L stainless steel manufactured by directed energy deposition10.1016/j.msea.2022.143591 ↗
17. A micropillar compression investigation into the plastic flow properties of additively manufactured alloys10.1016/j.actamat.2022.118290 ↗
18. Dislocation network in additive manufactured steel breaks strength–ductility trade-off10.1016/j.mattod.2017.11.004 ↗
19. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
20. Cascading of the as-built microstructure through heat treatment and its role on the tensile properties of laser powder bed fused Inconel 71810.1016/j.mtla.2021.101272 ↗
21. The role of cell boundary orientation on mechanical behavior: a site-specific micro-pillar characterization study
22. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L10.1016/j.actamat.2020.07.063 ↗
23. The origin of high-density dislocations in additively manufactured metals10.1080/21663831.2020.1751739 ↗
24. Enhanced strengthening and hardening via self-stabilized dislocation network in additively manufactured metals10.1016/j.mattod.2021.06.002 ↗
25. High temperature high strength austenitic steel fabricated by laser powder-bed fusion10.1016/j.actamat.2022.117876 ↗
26. Strengthening mechanisms in directed energy deposited austenitic stainless steel10.1016/j.actamat.2018.11.021 ↗
27. New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion10.1016/j.actamat.2020.11.018 ↗
28. Influence of bulk pre-straining on the size effect in nickel compression pillars10.1016/j.msea.2012.08.055 ↗
29. Pre-straining effects on the power-law scaling of size-dependent strengthening in Ni single crystals10.1016/j.scriptamat.2012.10.035 ↗
30. Size-induced weakening and grain boundary-assisted deformation in 60 nm grained Ni nanopillars10.1016/j.scriptamat.2010.09.010 ↗
31. Helium bubbles enhance strength and ductility in small-volume Al-4Cu alloys10.1016/j.scriptamat.2019.02.025 ↗
32. Focused Ion Beam (FIB): a novel technology for advanced application of micro- and nanoanalysis in geosciences and applied mineralogy10.1127/0935-1221/2004/0016-0863 ↗
33. Unnotched fatigue of Inconel 718 produced by laser beam-powder bed fusion at 25 and 600°C10.1016/j.actamat.2021.117565 ↗
34. Hydrogen uptake and its influence in selective laser melted austenitic stainless steel: a nanoindentation study10.1016/j.scriptamat.2020.113718 ↗
35. Influence of solidification conditions on chemical heterogeneities and dislocations patterning in additively manufactured 316L stainless steel10.1016/j.mtla.2022.101472 ↗
36. Sample size effects on the large strain bursts in submicron aluminum pillars
37. Deformation mechanism maps for sub-micron sized aluminum10.1016/j.actamat.2020.02.013 ↗
38. Plasticity of micrometer-scale single crystals in compression10.1146/annurev-matsci-082908-145422 ↗
39. Size effect on strength and strain hardening of small-scale [111] nickel compression pillars10.1016/j.msea.2007.12.038 ↗
40. Size-affected single-slip behavior of pure nickel microcrystals10.1016/j.actamat.2005.05.023 ↗
41. Plasticity in small-sized metallic systems: intrinsic versus extrinsic size effect10.1016/j.pmatsci.2011.01.005 ↗
42. Estimating the strength of single-ended dislocation sources in micron-sized single crystals10.1080/14786430701591513 ↗
43. Theoretical and numerical investigations of single arm dislocation source controlled plastic flow in FCC micropillars10.1016/j.ijplas.2013.11.011 ↗
44. Rate-dependent mechanical behavior of single-, bi-, twinned-, and poly-crystals of CoCrFeNi high-entropy alloy10.1016/j.jmst.2021.12.025 ↗
45. Diffraction contrast STEM of dislocations: imaging and simulations10.1016/j.ultramic.2011.07.001 ↗
46. In situ observation of dislocation nucleation and escape in a submicrometre aluminium single crystal10.1038/nmat2370 ↗
47. Deformation of small-volume Al-4Cu alloy under electron beam irradiation10.1016/j.actamat.2017.09.015 ↗
48. Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients10.1016/j.actamat.2004.12.031 ↗
49. Mechanical annealing and source-limited deformation in submicrometre-diameter Ni crystals10.1038/nmat2085 ↗
50. Micro-pillar plasticity controlled by dislocation nucleation at surfaces10.1080/14786435.2010.502141 ↗
51. Contribution to size effect of yield strength from the stochastics of dislocation source lengths in finite samples10.1016/j.scriptamat.2006.09.016 ↗
52. Atomistic simulations of dislocation pinning points in pure face-centered-cubic nanopillars10.1088/0965-0393/20/7/075001 ↗
53. Small-volume aluminum alloys with native oxide shell deliver unprecedented strength and toughness10.1016/j.actamat.2016.12.055 ↗
54. Size effect on the deformation behavior of duralumin micropillars10.1016/j.scriptamat.2013.02.012 ↗
55. Strength effects in micropillars of a dispersion strengthened superalloy10.1002/adem.201000089 ↗
56. In situ nanocompression testing of irradiated copper10.1038/nmat3055 ↗
57. Mechanism of high yield strength and yield ratio of 316 L stainless steel by additive manufacturing10.1016/j.msea.2018.12.092 ↗
58. Dislocation structures and their relationship to strength in deformed nickel microcrystals10.1016/j.actamat.2008.02.046 ↗
59. Athermal mechanisms of size-dependent crystal flow gleaned from three-dimensional discrete dislocation simulations10.1016/j.actamat.2008.03.011 ↗
60. In-situ characterization of the dislocation-structure evolution in Ni micro-pillars10.1016/j.actamat.2011.11.007 ↗
61. Source-controlled yield and hardening of Cu (100) studied by in situ transmission electron microscopy10.1016/j.actamat.2010.10.065 ↗
62. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
63. Dislocation mean free paths and strain hardening of crystals10.1126/science.1156101 ↗
64. Strain hardening and dislocation avalanches in micrometer-sized dimensions10.1016/j.actamat.2015.02.027 ↗