Closed die forging of a Mg–Al–Ca–Mn–Zn lean alloy
Source abstract
Abstract
The intensifying search for light weighting possibilities in transportation have repeatedly brought attention on wrought Mg alloys. While various alloys have been investigated a trend in development towards heat treatable Mg alloys with low alloying content has been noticeable. Investigations on wrought alloys are done predominantly by extrusion or rolling, but not by forging. As forgings are an indispensable part in structural components used today, it is important to gain an in depth understanding of the interaction between material, forming process and heat treatments of forged parts. In this study, the forging process of a piston rod using an age-hardenable lean Mg alloy AXMZ1000 is investigated on a semi-industrial scale, comparing two different stock materials: cast and homogenized versus extruded forging material. The microstructural evolution and mechanical properties during the production process are analyzed and assessed. Comparable microstructures are obtained with both starting materials. The mechanical properties achieved are slightly better with extruded feedstock than with the cast counterpart, but are at a satisfactory level comparable to extruded or rolled components made of similar alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Polmear · 2017
2. Current trends in automotive lightweighting strategies and materials
3. Aluminum alloys for lightweight automotive structures
4. DuckerFrontier, Aluminium Content in European Passenger Cars, Technical Report, 2019.
5. M. Tauber, H. Fischer, M. Just, H. Fackler, Magnesium Parts in Serial Production: A Virtual Demonstrator, IMA Webinar, 2020.
6. Properties of magnesium die castings for structural applications
7. Magnesium casting technology for structural applications10.1016/j.jma.2013.02.002 ↗
8. Nunes · 1992
9. Magnesium process and alloy development for applications in the automotive industry
10. Magnesium extrusion alloys: a review of developments and prospects10.1080/09506608.2017.1421439 ↗
11. Mg-Alloys for forging applications—A review10.3390/ma13040985 ↗
12. Low-cycle fatigue characterization and texture induced ratcheting behaviour of forged AZ80 Mg alloys10.1016/j.ijfatigue.2018.06.028 ↗
13. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
14. Aluminium Alloys Market Outlook (2022–2032), Technical Report, 2022, URL:.
15. Strong and ductile age-hardening Mg-Al-Ca-Mn alloy that can be extruded as fast as aluminum alloys10.1016/j.actamat.2017.03.046 ↗
16. Rational design of a lean magnesium-based alloy with high age-hardening response10.1016/j.actamat.2018.07.054 ↗
17. A heat-treatable Mg–Al–Ca–Mn–Zn sheet alloy with good room temperature formability10.1016/j.scriptamat.2017.05.034 ↗
18. Lean wrought magnesium alloys10.3390/ma14154282 ↗
19. Bake-hardenable Mg–Al–Zn–Mn–Ca sheet alloy processed by twin-roll casting10.1016/j.actamat.2018.07.057 ↗
20. Effects of rolling conditions on the microstructure and mechanical properties in a Mg–Al–Ca–Mn–Zn alloy sheet10.1016/j.msea.2018.05.065 ↗
21. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
22. Controlling the ignition and flammability of magnesium for aerospace applications10.1016/j.corsci.2014.04.047 ↗
23. Improving ductility of a Mg alloy via non-basal¡ a¿ slip induced by Ca addition10.1016/j.ijplas.2019.04.020 ↗
24. Comparison of the mechanical properties and forming behavior of two texture-weakened mg-sheet alloys produced by twin roll casting
25. Effects of Ca on tensile properties and stretch formability at room temperature in Mg-Zn and Mg-Al alloys10.2320/matertrans.M2011048 ↗
26. Stacking-fault mediated plasticity and strengthening in lean, rare-earth free magnesium alloys
27. Particle effects on recrystallization in magnesium–manganese alloys: particle pinning10.1016/j.msea.2011.02.030 ↗
28. Execution and evaluation of cyclic tests at constant load amplitudes–DIN 50100: 201610.3139/120.111238 ↗
29. Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety10.1016/j.ijfatigue.2006.11.015 ↗
30. Trink · 2020
31. The recrystallized grain size piezometer for quartz: An EBSD-based calibration10.1002/2017GL073836 ↗
32. Information depth in backscattered electron microscopy of nanoparticles within a solid matrix10.1016/j.matchar.2018.01.049 ↗
33. Texture and mechanical properties of strip cast and hot rolled magnesium AZ3110.3139/146.110463 ↗
34. Texture evolution and dynamic mechanical behavior of cast AZ magnesium alloys under high strain rate compressive loading10.1016/j.matdes.2014.04.049 ↗
35. High-strength extruded Mg–Al–Ca–Mn alloy10.1016/j.scriptamat.2011.04.026 ↗
36. Investigations of high-strength Mg–Al–Ca–Mn alloys with a broad range of Ca+ Al contents
37. High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties10.1016/j.msea.2016.10.007 ↗
38. Dynamic recrystallization during high temperature deformation of magnesium10.1016/j.msea.2008.02.004 ↗
39. Processing and microstructure–property relations of high-strength low-alloy (HSLA) Mg–Zn–Ca alloys10.1016/j.actamat.2015.07.021 ↗
40. Modeling of strain hardening and dynamic recrystallization of ZK60 magnesium alloy during hot deformation10.1016/S1003-6326(11)61167-9 ↗
41. Processing of high strength EN AW 6082 forgings without a solution heat treatment10.1016/j.msea.2016.07.062 ↗
42. Activity of pyramidal I and II ¡c+ a¿ slip in Mg alloys as revealed by texture development10.1016/j.jmps.2017.11.004 ↗
43. Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals10.1016/j.actamat.2010.11.064 ↗
44. Sabroff · 1964
45. Tensile fracture behavior of aging hardened Mg–1Ca and Mg–1Ca–1Zn alloys10.1016/j.matlet.2008.05.021 ↗
46. On the notch ductility of a magnesium-rare earth alloy10.1016/j.msea.2015.08.077 ↗
47. The effect of stress state and strain partition mode on the damage behavior of a Mg-Ca alloy
48. Designing a magnesium alloy with high strength and high formability
49. Texture evolution during static recrystallization of cold-rolled magnesium alloys10.1016/j.actamat.2015.12.045 ↗
50. Effect of solute atoms on fracture toughness in dilute magnesium alloys10.1080/14786435.2013.838008 ↗
51. The role of Ca, Al and Zn on room temperature ductility and grain boundary cohesion of magnesium10.1016/j.jma.2021.03.005 ↗
52. High strength and excellent ductility of dilute Mg-0.68 Al-0.32 Ca-0.50 Mn (wt%) extrusion alloy obtained by T6 treatment10.1016/j.matchar.2020.110197 ↗
53. Enhanced strength-ductility synergy achieved through twin boundary pinning in a bake-hardened Mg–2Zn-0.5 Ca alloy
54. Ultrahigh strength Mg-Al-Ca-Mn extrusion alloys with various aluminum contents10.1016/j.jallcom.2019.03.319 ↗
55. Fatigue crack initiation of magnesium alloys under elastic stress amplitudes: A review10.1007/s11465-018-0482-1 ↗
56. Effect of stress ratio on high cycle fatigue properties in Mg-6Zn-1Mn alloy10.1016/j.msea.2017.10.082 ↗