Evolution of nanosized Cu-rich clusters in a Fe–15Cu–15Ni alloy produced by laser powder bed fusion
Source abstract
Abstract
Designing a metastable microstructure with a coherent nano-sized precipitation phase in the matrix is an effective strategy in improving the strength of materials. Recently, the rapid fusion and solidification cycle associated with laser-based additive manufacturing (AM) has emerged as a promising strategy to design unique microstructures with lattice distortion, solute segregation, and nano-sized precipitations. In this study, the evolution of nano-sized Cu-rich clusters in an AM-processed Fe-15Cu-15Ni alloy (wt.%) was investigated by conducting multiscale microstructural characterization. The results reveal that nano-sized Cu-rich clusters were generated inside the matrix due to a phase decomposition induced by the intrinsic heat treatment during the AM process. The heat energy generated by the laser beam not only initiated Cu-rich cluster formation, but also induced precipitation growth. Therefore, the average Cu-rich cluster size increased with an increase in the volumetric energy density. The hardness of the AM-processed Fe-15Cu-15Ni alloy at first increased with an increase in the energy density until a medium energy density level (140 J/mm(3)), due to formation of Cu-rich clusters. The hardness decreased with further increase in energy density (185 J/mm(3)), due to the Cu-rich cluster growth and retained austenite. The results reveal that laser-based AM successfully induces nano-cluster without the need for post-treatment and that the mechanical properties of materials can be optimized by adjusting the processing parameters in a way to enable nano-sized cluster and phase formation. ; 1 ; 1 ; N ; scie ; scopus
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
2. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
3. Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloy10.1016/j.msea.2019.138726 ↗
4. Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel
5. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
6. Hierarchical structures of stainless steel 316L manufactured by electron beam melting
7. Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting10.1557/jmr.2014.204 ↗
8. Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition10.1016/j.actamat.2017.02.069 ↗
9. Precipitation reactions in age-hardenable alloys during laser additive manufacturing
10. Effects of selective laser melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties10.1016/j.msea.2018.08.037 ↗
11. Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting10.1016/j.actamat.2018.04.053 ↗
12. Superior tensile properties of 1%C-CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting10.1080/21663831.2019.1638844 ↗
13. Effects of annealing on the structure and mechanical properties of FeCoCrNi high-entropy alloy fabricated via selective laser melting
14. Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy10.1080/21663831.2019.1650131 ↗
15. Heterogeneous aspects of additive manufactured metallic parts: a review10.1007/s12540-020-00931-2 ↗
16. Selective laser melting of a high strength Al-Mn-Sc alloy: alloy design and strengthening mechanisms10.1016/j.actamat.2019.04.014 ↗
17. Enhanced tensile yield strength in laser additively manufactured Al0.3CoCrFeNi high entropy alloy10.1016/j.mtla.2019.100522 ↗
18. Intrinsic heat treatment within additive manufacturing of gamma titanium aluminide space hardware
19. Control of thermally stable core-shell nano-precipitates in additively manufactured Al-Sc-Zr alloys
20. Effects of laser-energy density and build orientation on the structure-property relationships in as-built Inconel 718 manufactured by laser powder bed fusion
21. High-strength Damascus steel by additive manufacturing10.1038/s41586-020-2409-3 ↗
22. Precipitation hardening in Fe-Cu binary and quaternary alloys10.2355/isijinternational.34.359 ↗
23. An atom-probe tomographic study of the temporal evolution of the nanostructure of Fe–Cu based high-strength low-carbon steels10.1016/j.scriptamat.2006.02.040 ↗
24. Precipitation kinetics in binary Fe–Cu and ternary Fe–Cu–Ni alloys via kMC method10.1016/j.pnsc.2017.06.005 ↗
25. Precipitation kinetics and strengthening of a Fe–0.8wt%Cu alloy10.2355/isijinternational.41.196 ↗
26. Interfacial segregation at Cu-rich precipitates in a high-strength low-carbon steel studied on a sub-nanometer scale10.1016/j.actamat.2005.10.023 ↗
27. Novel ultra-high-strength Cu-containing medium-Mn duplex lightweight steels10.1016/j.actamat.2017.06.035 ↗
28. Cu addition effects on TRIP to TWIP transition and tensile property improvement of ultra-high-strength austenitic high-Mn steels10.1016/j.actamat.2018.12.044 ↗
29. A nanoscale co-precipitation approach for property enhancement of Fe-base alloys10.1038/srep01327 ↗
30. Microstructure characterization of Cu-rich nanoprecipitates in a Fe–2.5Cu–1.5 Mn–4.0 Ni–1.0 Al multicomponent ferritic alloy10.1016/j.actamat.2012.12.034 ↗
31. SANS study of phase decomposition in Fe-Cu alloy with Ni and Mn addition10.2355/isijinternational.34.346 ↗
32. Seko · Mater. Trans. · 2004 · 45 · 197810.2320/matertrans.45.1978 ↗
33. Synergistic alloying effect on microstructural evolution and mechanical properties of Cu precipitation-strengthened ferritic alloys10.1016/j.actamat.2013.09.011 ↗
34. Precipitation mechanism and mechanical properties of an ultra-high strength steel hardened by nanoscale NiAl and Cu particles10.1016/j.actamat.2015.06.063 ↗
35. Aging characteristics and mechanical properties of 1600 MPa body-centered cubic Cu and B2-NiAl precipitation-strengthened ferritic steel10.1016/j.actamat.2014.03.051 ↗
36. Computer simulation of phase decomposition in Fe–Cu–Mn–Ni quaternary alloy based on the phase-field method10.2320/matertrans.46.1187 ↗
37. The influence of oxygen on the chemical composition and mechanical properties of Ti-6Al-4V during laser powder bed fusion (L-PBF)
38. Recyclability of stainless steel (316 L) powder within the additive manufacturing process10.1016/j.mtla.2019.100489 ↗
39. The origin and formation of oxygen inclusions in austenitic stainless steels manufactured by laser powder bed fusion
40. Effect of laser focus shift on surface quality and density of Inconel 718 parts produced via selective laser melting
41. Combining structural and chemical information at the nanometer scale by correlative transmission electron microscopy and atom probe tomography10.1016/j.ultramic.2015.02.003 ↗
42. Additive manufacturing of metallic components by selective electron beam melting—a review10.1080/09506608.2016.1176289 ↗
43. Selective laser melting of pure Cu with a 1 kW single mode fiber laser10.1016/j.procir.2018.08.030 ↗
44. Additive manufacturing of NiTi shape memory alloys using pre-mixed powders10.1016/j.jmatprotec.2019.03.025 ↗
45. Corrosion properties of 304L stainless steel made by directed energy deposition additive manufacturing10.1016/j.corsci.2019.02.029 ↗
46. Additive manufacturing of high-entropy alloys: a review10.3390/e20120937 ↗
47. Cracking behavior and control of β-solidifying Ti-40Al-9V-0.5Y alloy produced by selective laser melting10.1016/j.jmst.2019.08.026 ↗
48. Comparison of maraging steel micro- and nanostructure produced conventionally and by laser additive manufacturing
49. Predictive process parameter selection for selective laser melting manufacturing: applications to high thermal conductivity alloys10.1016/j.addma.2018.12.003 ↗
50. Development of maraging steel with retained austenite in martensite matrix
51. Selective laser melting of stainless steel 316L with low porosity and high build rates10.1016/j.matdes.2016.05.035 ↗
52. Metastable δ-ferrite and twinning-induced plasticity on the strain hardening behavior of directed energy deposition-processed 304L austenitic stainless steel10.1016/j.addma.2021.102363 ↗
53. Design and formation mechanism of self-organized core/shell structure composite powder in immiscible liquid system10.1063/1.2794415 ↗
54. Reducibility of oxides and sulphides in metallurgical processes
55. Effect of cooling rates on γ→α transformation and metastable states in Fe–Cu alloys with addition of Ni10.1007/s12540-018-0080-0 ↗
56. On-line temperature monitoring in selective laser sintering/melting10.1016/j.phpro.2010.08.079 ↗
57. Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immiscible alloys10.1016/j.actamat.2012.10.033 ↗
58. Some comments on the misfit and coherency loss of Al3Sc particles in Al–Sc alloys10.1016/j.scriptamat.2005.02.023 ↗
59. Comparison of additively manufacturing samples fabricated from pre-alloyed and mechanically mixed powders10.1016/j.jallcom.2020.154603 ↗