journal article·2022-01

Mechanical properties of unidirectional laminated hybrid SiC–Nextel™ 720 fiber-reinforced oxide matrix composites fabricated by a novel precursor infiltration and pyrolysis method

Lixia Yang, Bofeng Zhong, Jiahao Liao, Peixuan Ouyang, Zhaofeng Chen, Fei Wang, Lirong Luo, Zongde Kou

Publisher page

Abstract

Abstract Unidirectional laminated hybrid SiC–Nextel™ 720 fiber-reinforced yttria-stabilized zirconia–mullite composites were fabricated by a novel precursor infiltration and pyrolysis method. The effect of annealing atmosphere (Ar and air) at 1200 °C on the mechanical properties and failure mechanism of the composites was investigated. The Ar-annealed composite had a superior flexural strength of 337.1 ± 5.7 MPa and a good fracture toughness of 13.3 ± 0.1 MPa m1/2, and exhibited non-brittle failure behavior. However, the Air-annealed composite had a poor flexural strength of 102.8 ± 0.8 MPa and a low fracture toughness of 5.3 ± 0.3 MPa m1/2, and it exhibited brittle failure behavior. Further analysis indicated that the presence of a considerable amount of residual carbon in the Ar-annealed composite effectively weakened the fiber/matrix interface by reducing the residual radial compressive stress and the interfacial coefficient of friction. The weak interface could trigger toughening mechanisms in the composite, such as fiber pullout and debonding, and crack deflection. The mechanical degradation of the Air-annealed composite was also associated with the slight damage of Nextel™ 720 and the oxidation of SiC fibers after exposure in a high-temperature air environment. The findings of this study provide guidance for designing new composites exhibiting high performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Ceramics for future power generation technology: fiber reinforced oxide composites10.1016/S1359-0286(01)00017-1 ↗
2. High toughness ceramics and ceramic composites10.1016/0079-6425(89)90005-4 ↗
3. Chawla · 2013
4. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview10.1016/S0266-3538(03)00230-6 ↗
5. KD-S SiC f/SiC composites with BN interface fabricated by polymer infiltration and pyrolysis process10.1007/s40145-018-0268-2 ↗
6. Mechanical properties of porous-matrix ceramic composites10.1002/1527-2648(200101)3:1/2<15::AID-ADEM15>3.0.CO;2-A ↗
7. Improved mechanical and microwave absorption properties of SiC fiber/mullite matrix composite using hybrid SiC/Ti3SiC2 fillers10.1016/j.jallcom.2019.03.280 ↗
8. Effects of ZrO2 coating on the strength improvement of 2.5 D SiCf/SiO2 composites10.1016/j.ceramint.2016.09.164 ↗
9. Influence of different matrices on the mechanical and microwave absorption properties of SiC fiber-reinforced oxide matrix composites10.1016/j.ceramint.2017.12.193 ↗
10. Effect of preparation conditions on mechanical, dielectric and microwave absorption properties of SiC fiber/mullite matrix composite10.1016/j.ceramint.2019.03.034 ↗
11. Micro-mechanical properties and interfacial engineering of SiC fiber reinforced sol-gel fabricated mullite matrix composites10.1016/j.matdes.2017.06.031 ↗
12. Compressive creep of SiC whisker-reinforced alumina10.1016/0955-2219(92)90087-T ↗
13. Enhanced high-temperature dielectric and microwave absorption properties of SiC fiber-reinforced oxide matrix composites10.1002/app.47097 ↗
14. Somiya · 1990
15. Bunsell · 2005 · 3
16. Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs-a review10.1080/09506608.2019.1652006 ↗
17. Mechanical properties of high-temperature-degraded yttria-stabilized zirconia10.1016/j.actamat.2014.01.017 ↗
18. Transformation toughening in zirconia-containing ceramics10.1111/j.1151-2916.2000.tb01221.x ↗
19. Perspective on the development of high-toughness ceramics10.1111/j.1151-2916.1990.tb06493.x ↗
20. Stabilized zirconia as a structural ceramic: an overview10.1016/j.dental.2007.05.005 ↗
21. Preparation and characterization of an all oxide ceramic matrix composite by A novel method10.1088/1757-899X/678/1/012030 ↗
22. Strength degradation of SiC fibers with a porous ZrB2-SiC coating: role of the coating porous structure10.1016/j.jeurceramsoc.2019.12.017 ↗
23. Load transfer from broken fibers in continuous fiber Al2O3-Al composites and dependence on local volume fraction10.1016/S0022-5096(98)00053-2 ↗
24. Continuous alumina fiber-reinforced yttria-stabilized zirconia composites with high density and toughness10.1016/j.jeurceramsoc.2019.12.041 ↗
25. New aspects of Raman scattering in carbon-based amorphous materials10.1016/j.diamond.2008.01.110 ↗
26. Packing density of composite powder mixtures10.1111/j.1151-2916.1991.tb07803.x ↗
27. Effect of inclusions on densification: I, microstructural development in an Al2O3 matrix containing a high volume fraction of ZrO2 inclusions10.1111/j.1151-2916.1992.tb07836.x ↗
28. Thermal expansion coefficient of yttria stabilized zirconia for various yttria contents10.1016/j.ssi.2004.08.021 ↗
29. Structure and properties of mullite—a review10.1016/j.jeurceramsoc.2007.03.017 ↗
30. High-temperature behavior and degradation mechanism of SiC fibers annealed in Ar and N 2 atmospheres10.1007/s10853-016-9780-3 ↗
31. Effect of heat treatment on the microstructure and tensile strength of KD-II SiC fibers10.1016/j.msea.2016.07.066 ↗
32. Formation mechanism of large SiC grains on SiC fiber surfaces during heat treatment10.1039/C6CE00427J ↗
33. Oxidation behavior of Hi-Nicalon SiC monofilament fibres in air and O2–H2O–Ar atmospheres10.1016/j.corsci.2011.12.019 ↗
34. Effectiveness of monazite coatings in oxide/oxide composites after long-term exposure at high temperature10.1111/j.1151-2916.2003.tb00018.x ↗
35. Creep behavior in interlaminar shear of Nextel™ 720/alumina ceramic composite at elevated temperature in air and in steam10.1016/j.compscitech.2008.04.009 ↗
36. Creep behavior of Nextel™720/alumina ceramic composite with ±45° fiber orientation at 1200°C10.1016/j.compscitech.2007.07.012 ↗
37. Fracture behaviour of mullite fibre reinforced–mullite matrix composites under quasi-static and ballistic impact loading10.1016/j.compscitech.2004.08.002 ↗
38. Assessment of three oxide/oxide ceramic matrix composites: mechanical performance and effects of heat treatments10.1016/j.compositesa.2014.09.013 ↗
39. In-plane mechanical properties of an all-oxide ceramic composite10.1111/j.1151-2916.1999.tb02148.x ↗
40. Processing and properties of an all-oxide composite with a porous matrix10.1016/S0955-2219(99)00259-9 ↗
41. Effects of matrix porosity on the mechanical properties of a porous-matrix, all-oxide ceramic composite10.1111/j.1151-2916.2001.tb01059.x ↗
42. Processing and properties of a porous oxide matrix composite reinforced with continuous oxide fibers10.1111/j.1151-2916.2003.tb03548.x ↗
43. The role of interfaces in fiber-reinforced brittle matrix composites10.1016/0266-3538(91)90010-M ↗
44. Effect of filler shape, volume fraction and loading rate on dynamic fracture behavior of glass-filled epoxy10.1016/j.compositesb.2014.04.016 ↗
45. Effect of aspect ratio on dynamic fracture toughness of particulate polymer composite using artificial neural network10.1016/j.engfracmech.2020.106907 ↗
46. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites10.1016/j.compositesb.2008.01.002 ↗
47. Predicted effects of interfacial roughness on the behavior of selected ceramic composites10.1111/j.1151-2916.1997.tb03088.x ↗
48. Polarization dependence of the Cr3+ R-line fluorescence from sapphire and its application to crystal orientation and piezospectroscopic measurement10.1111/j.1151-2916.1997.tb02792.x ↗
49. Confocal fluorescence microscopy in alumina-based ceramics: where does the signal come from?10.1016/j.jeurceramsoc.2009.08.020 ↗
50. Determination of the piezospectroscopic coefficients for chromium-doped sapphire10.1111/j.1151-2916.1995.tb08493.x ↗
51. Shear-lag analysis of fiber push‐out (indentation) tests for estimating interfacial friction stress in ceramic‐matrix composites10.1111/j.1151-2916.1988.tb05843.x ↗
52. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
53. Nanoindentation examination of yttria-stabilized zirconia (YSZ) crystal10.1016/j.jallcom.2006.05.058 ↗
54. Elastic properties of mullite10.1111/j.1151-2916.1998.tb02441.x ↗
55. Thermal‐expansion behavior of two-phase solids10.1063/1.1658619 ↗
56. Nonlinear free vibration of functionally graded carbon nanotube-reinforced composite beams10.1016/j.compstruct.2009.09.024 ↗
57. Effect of SiC and TiC addition on microstructural and mechanical characteristics of microwave sintered ZrB2 based hybrid composites10.1016/j.ceramint.2021.06.058 ↗
58. Effect of interfacial residual thermal stress on the fracture behavior of Cf/B4C composites prepared by spark plasma sintering10.1016/j.ceramint.2019.10.188 ↗
59. Thermal expansion coefficient of hydrogenated amorphous carbon10.1063/1.1619557 ↗
60. Mechanical properties for reliability analysis of structures in glassy carbon
61. Glassy carbon: a promising material for micro-and nanomanufacturing10.3390/ma11101857 ↗
62. Solid lubricants: a review10.1007/s10853-012-7038-2 ↗