journal article·2022-01

Optimizing the local microstructure and mechanical properties of variable section particulate reinforced titanium matrix composites component based on numerical simulation and isothermal forming

Shaopeng Li, Yuanfei Han, Haitao Zhou, Guangfa Huang, Jianwen Le, Xiaoyan Wang, Weijie Lu

Publisher page

Abstract

Abstract To solve the precision forming problem of titanium matrix composites (TMCs) precision components with variable cross-sections, isothermal compression model of (TiB + La2O3)/IMI834 composite was established to investigate the deformation behaviors, determine forming strategy, predict and optimize the local microstructure. The subsequent isothermal precision forming experiment proved the precision forgings can be successfully fulfilled with good surface quality in one step using a cylindrical billet following the simulation strategy. Referring to simulation results, the local microstructure and performance were successfully optimized by controlling the deformation degree in different section regions to meet the service requirements. Fine-grained regions and reinforcement-rich regions were formed in the small cross-section (large deformation) regions due to the rotation and directional arrangement of the reinforcements and the dynamic recrystallization stimulated by the reinforcements, where the engineering strength and elongation were both improved from 1137 MPa and 2.55% to 1176.5 MPa and 4.0%, respectively, compared with the large cross-section (small deformation) regions. This research provided an important guidance for improving the fabrication efficiency and optimizing the local microstructure and performance of TMCs precision components by isothermal forming.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Ti--B--Based composite materials properties, basic fabrication methods, and fields of application (review)10.1016/j.compositesa.2018.02.027 ↗
2. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
3. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review10.1016/j.jallcom.2016.06.212 ↗
4. The effect of rolling temperature on the microstructure and mechanical properties of 5 vol.% (TiBw + TiCp)/Ti composites
5. Synergistic strengthening behavior and microstructural optimization of hybrid reinforced titanium matrix composites during thermomechanical processing10.1016/j.matchar.2020.110527 ↗
6. Effects of extrusion on microstructure and tensile properties of 3D network structured TiBw/Ti60 composites fabricated by reaction hot pressing10.1016/j.jallcom.2013.08.095 ↗
7. Isothermal deformation and spheroidization mechanism of (TiB + La2O3)/Ti composites with different initial structures10.1016/j.matchar.2018.09.040 ↗
8. Study of isothermal split-die precision forging process of high-strength aluminum alloy complex-shape forgings10.4028/www.scientific.net/AMR.941-944.1761 ↗
9. Selective laser melting of hybrid ex-situ/in-situ reinforced titanium matrix composites: laser/powder interaction, reinforcement formation mechanism, and non-equilibrium microstructural evolutions10.1016/j.matdes.2019.108185 ↗
10. Simulation and experimental research on isothermal forging with semi-closed die and multi-stage-change speed of large AZ80 magnesium alloy support beam10.1016/j.jmatprotec.2017.03.015 ↗
11. Preform and process design of Ti-6Al-4V compressor blade using equipotential lines and 3D FE simulation
12. Design for isothermal forging of Ti-46.5Al-2.5V-1.0Cr-0.3Ni alloy10.1016/S1006-706X(10)60131-8 ↗
13. Friction factor evaluation by FEM and experiment for TA15 titanium alloy in isothermal forming process
14. Preform design for large-sized frame forging of Ti-alloy based on 3-D electrostatic field simulation and geometric transformation10.1007/s11665-010-9811-1 ↗
15. Precision forging process analysis and preform optimization of small compressor blade of titanium alloy10.4028/www.scientific.net/AMM.364.493 ↗
16. Batch processing in preassembled die sets—a new process design for isothermal forging of titanium aluminides
17. Compressive response and microstructural evolution of bimodal sized particulates reinforced (TiB+La2O3)/Ti composites10.1016/j.jallcom.2017.10.245 ↗
18. Effects of process parameters on the temperature field in Ti-6Al-4V alloy blade precision forging process
19. Microstructure characteristics of ECAP-processed (TiB+La2O3)/Ti-6Al-4V composites10.1016/j.jallcom.2017.07.294 ↗
20. Enhanced Hall-Petch strengthening in graphene/Cu nanocomposites10.1016/j.jmst.2021.02.013 ↗
21. Effects of degree of deformation on the microstructure, mechanical properties and texture of hybrid-reinforced titanium matrix composites10.1016/j.actamat.2012.01.032 ↗
22. An analytical study on strengthening of particulate reinforced metal matrix composites10.1016/1359-6454(95)00150-9 ↗