journal article·2021-11

Microstructural and mechanical characterization of tungsten containing lanthana based ferritic ODS steel

Ashwani Kumar, Jayabalan Bhagyaraj, Amit Prasad, Jayant Jain, Subrata Mukherjee, Krishanu Biswas, Sudhanshu S. Singh

Publisher page

Abstract

Abstract In the present study, tungsten (W) containing lanthana (La2O3) based ODS steels (Fe–14Cr–1Ti-xW-0.5L2O3 or 14LWT, x = 0, 0.5, 1, 1.5, 2) have been synthesized by mechanical alloying followed by spark plasma sintering (SPS). The effect of the tungsten content and sintering temperature (1050 °C and 1100 °C) on the densification and mechanical properties of the alloys have been evaluated and correlated with the microstructure. Increasing the sintering temperature leads to improvement of both the density and the hardness. The highest hardness and Young's modulus were obtained for Fe–14Cr–1Ti–1W–0.5L2O3 as 1061.4 ± 22.8 HV and 228.2 ± 2.9 GPa, respectively. Transmission Electron Microscopy (TEM) analysis suggested that the nano-sized precipitates are complex oxides of La, Ti and Cr (i.e., La–Ti–Cr–O) and are predominantly in the size range of 2–5 nm. Comparison of properties of 14LWT with Fe–14Cr–1Ti–1W–0.5Y2O3 (14YWT) ODS steel showed that the 14LWT exhibits higher hardness and compressive strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Ferritic steels and advanced ferritic-martensitic steels
2. Development of advanced radiation resistant ODS steel for fast reactor system Applications10.4236/wjet.2015.33C019 ↗
3. Microstructures and mechanical properties of 9Cr oxide dispersion strengthened steel produced by spark plasma sintering10.1016/j.fusengdes.2016.12.034 ↗
4. Microstructure and mechanical properties of nano-Y2O3 dispersed ferritic alloys synthesized by mechanical alloying and consolidated by hydrostatic extrusion10.1016/j.msea.2013.04.085 ↗
5. Tensile and creep properties of an oxide dispersion-strengthened ferritic steel10.1016/S0022-3115(02)01046-2 ↗
6. Microstructural characterization and strengthening mechanisms of a 15Cr-ODS steel produced by mechanical alloying and Spark Plasma Sintering10.1016/j.fusengdes.2018.08.020 ↗
7. Characterization of 14Cr ODS steel fabricated by spark plasma sintering
8. “Optimization of mechanical alloying and spark-plasma sintering regimes to obtain ferrite–martensitic ODS steel
9. Microstructure and mechanical properties of oxide dispersion strengthened ferritic steel prepared by a novel route10.1016/j.jnucmat.2011.12.020 ↗
10. Microstructure and mechanical properties of an ODS RAF steel fabricated by hot extrusion or hot isostatic pressing10.1016/j.fusengdes.2011.01.022 ↗
11. Fabrication and characterization of oxide dispersion strengthened (ODS) 14Cr steels consolidated by means of hot isostatic pressing, hot extrusion and spark plasma sintering10.1016/j.jnucmat.2015.09.036 ↗
12. Influence of HIP pressure on tensile properties of a 14Cr ODS ferritic steel10.1016/j.fusengdes.2014.01.052 ↗
13. Evaluation of microstructure and mechanical properties of nano-Y 2O3-dispersed ferritic alloy synthesized by mechanical alloying and consolidated by high-pressure sintering10.1007/s11661-013-1627-9 ↗
14. Microstructure and mechanical properties of nano-Y 2O 3 dispersed ferritic steel synthesized by mechanical alloying and consolidated by pulse plasma sintering10.1080/14786435.2011.619508 ↗
15. Development of ultra high strength nano-Y2O3 dispersed ferritic steel by mechanical alloying and hot isostatic pressing10.1016/j.msea.2011.06.039 ↗
16. Hot hardness behaviour of ultrafine grained ferritic oxide dispersion strengthened alloys prepared by mechanical alloying and spark plasma sintering10.1016/j.msea.2012.08.033 ↗
17. Processing and microstructure characterisation of oxide dispersion strengthened Fe-14Cr-0.4Ti-0.25Y2O3 ferritic steels fabricated by spark plasma sintering10.1016/j.jnucmat.2015.04.029 ↗
18. Effect of spark plasma sintering temperature on microstructure and mechanical properties of 14Cr-ODS ferritic steels10.1016/j.msea.2016.02.073 ↗
19. Microstructural stability of a self-ion irradiated lanthana-bearing nanostructured ferritic steel10.1016/j.jnucmat.2015.03.040 ↗
20. A preliminary study on the development of La2O 3-bearing nanostructured ferritic steels via high energy ball milling10.1016/j.jnucmat.2012.11.020 ↗
21. Mechanical alloying of lanthana-bearing nanostructured ferritic steels10.1016/j.actamat.2013.06.002 ↗
22. Effect of alloying elements on the microstructure and mechanical properties of nanostructured ferritic steels produced by spark plasma sintering10.1016/j.jallcom.2014.01.243 ↗
23. Lanthana-bearing nanostructured ferritic steels via spark plasma sintering10.1016/j.jnucmat.2015.12.035 ↗
24. Photodissociation of yttrium and lanthanum oxide cluster cations
25. Development of reduced-activation martensitic 9Cr steels for fusion reactor10.1080/18811248.1994.9735152 ↗
26. Elevated temperature ferritic and martensitic steels and their application to future nuclear reactors10.1179/174328005X41140 ↗
27. Effect of tungsten addition on microstructure and high temperature strength of 9CrODS ferritic steel10.1016/j.jnucmat.2011.01.060 ↗
28. Fabrication of novel cryomill for synthesis of high purity metallic nanoparticles10.1063/1.4929325 ↗
29. Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles
30. Spark plasma sintering of nanocrystalline Cu and Cu-10 Wt Pct Pb alloy10.1007/s11661-010-0589-4 ↗
31. Wear behavior of high entropy alloys containing soft dispersoids (Pb, Bi)10.1016/j.matchemphys.2017.06.020 ↗
32. Microstructural evolution and chemical redistribution in Fe-Cr-W-Ti-Y 2O3 nanostructured powders prepared by ball milling10.1016/j.jallcom.2013.05.201 ↗
33. Mechanism of chromium oxide formation in cobalt-chromium-molybdenum (F75) alloys prepared using spark plasma sintering10.1002/adem.201000367 ↗
34. Influence of processing route on the alloying behavior, microstructural evolution and thermal stability of CrMoNbTiW refractory high-entropy alloy
35. Sintering behavior of lanthana-bearing nanostructured ferritic steel consolidated via spark plasma sintering10.1002/adem.201500294 ↗
36. Humphereys · 1995
37. Microstructure evolution in nano-reinforced ferritic steel processed by mechanical alloying and spark plasma sintering10.1007/s11661-013-2107-y ↗
38. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
39. "Ferberite in the Handbook of Mineralogy" Mineral Data Publishing, version 1.
40. Materials science and engineering: an introduction10.1016/0261-3069(91)90101-9 ↗
41. Effects of doping molybdenum wire with rare-earth elements
42. Poerschike · 2009
43. Mueller · 2001 · vol. 1 · 485
44. Rapid synthesis of oxide dispersion strengthed ferritic alloys through spark plasma sintering10.1016/j.matpr.2019.11.094 ↗