journal article·2021-09

Lüders strain of the fine-grained material under the electric current

Xinfang Zhang, Shuai Zhou, Hexiong Zhang, Xuebing Liu, Huajie Yang

Publisher page

Abstract

Abstract The Hall-Petch-like relationship between the Luders strain and the average grain size of an Al-5.16Zn-2.2Mg-1.46Cu alloy under the pulsed electric current is investigated. It is found that the Luders strain increases as the average grain size decreases. In addition, when the average grain size is the same, the current parameter has a significant effect on the absolute value of the slope in the Hall-Petch-like relationship. Based on the characteristics of interaction between the solute atoms and dislocations during the Luders strain, the competition between pinning behavior of solute atoms and depinning behavior of dislocations under the electric current is explored, and a relevant mathematical model is established. According to the new mathematical model, the difference of the above competitive behavior under two different current densities is analyzed. When the current density is 5 A/mm2, the pinning behavior of solute atoms is dominant in the competition, and the length of the yield plateau of each grain size becomes shorter; however, when the current density is 55 A/mm2, the dislocation depinning behavior dominants the competition and the Luders strain of each grain size increases. It is found that the current density can affect the competition between the pinning of solute atoms and the depinning of dislocations, thus affecting the Luders strain.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic Effects on Materials · Microstructure and mechanical properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Effect of grain size on tensile and wire drawing behaviors in twinning-induced plasticity steel10.1016/j.msea.2019.138709 ↗
2. Role of grain size in tensile behavior in twinning-induced plasticity β Ti-20V-2Nb-2Zr alloy10.1016/j.matchar.2016.09.016 ↗
3. Experimental and crystal plasticity evaluation of grain size effect on formability of austenitic stainless steel sheets10.1016/j.jmapro.2019.09.035 ↗
4. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
5. The cleavage strength of polycrystals
6. A multiscale investigation into the effect of grain size on void evolution and ductile fracture: experiments and crystal plasticity modeling10.1016/j.ijplas.2019.09.009 ↗
7. Grain size-dependent crystal plasticity constitutive model for polycrystal materials10.1016/j.msea.2017.07.087 ↗
8. Softening behavior of Al-Zn-Mg alloys with different strengthening mechanisms in a coupled field10.1016/j.msea.2019.138582 ↗
9. Effect of grain size on the corrosion resistance of low carbon steel10.1088/2053-1591/ab62fa ↗
10. Effects of deformation texture and grain size on corrosion behavior of Mg-3A1-1Zn alloy sheets
11. Effect of grain refinement on tensile properties and electrochemical behavior of Fe-18.5%Cr ferritic stainless steel10.1016/j.matchemphys.2020.123089 ↗
12. Lüders deformation in polycrystalline iron10.1016/0001-6160(78)90012-3 ↗
13. The effect of grain size on the yield strength of Ni3Al10.1016/0001-6160(85)90152-X ↗
14. Macroscopic aspects of Lüders band deformation in mild steel10.1016/0956-7151(91)90049-7 ↗
15. Modeling of critical grain size for shifting plasticity enhancement to decrease by refining grain size10.1016/j.msea.2014.04.012 ↗
16. In situ multi-field investigation of grain size effects on the rate-dependent thermomechanical responses of polycrystalline superelastic NiTi10.1016/j.matlet.2019.126845 ↗
17. Transformation kinetics of retained austenite in the tensile Lüders strain range in medium Mn steel10.1016/j.scriptamat.2019.04.044 ↗
18. Influence of strain rate and strain at temperature on TRIP effect in a metastable austenitic stainless steel10.1016/j.msea.2020.139046 ↗
19. Experimental measurement of the variables of Lüders deformation in hot-rolled steel via digital image correlation10.1016/j.msea.2020.139756 ↗
20. Anisotropy of action of gamma-electronic emission and gamma rays on deformation of single zinc crystals in the brittle state
21. Electroplastic effect in indium (In)10.1007/BF00771842 ↗
22. Characteristics of the plastic deformation of a metal during passage of an electric current10.1007/BF01522653 ↗
23. Overview no. 49: on the mechanisms for the electroplastic effect in metals10.1016/0001-6160(86)90001-5 ↗
24. Electric current-assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension10.1016/j.ijplas.2016.09.010 ↗
25. Deformation mechanisms and recrystallization behavior of Mg-3Al-1Zn and Mg-1Gd alloys deformed by electroplastic-asymmetric rolling10.1016/j.msea.2018.09.041 ↗
26. Effect of pulsed electric current on TRIP-Aided Steel10.1007/s40684-019-00060-1 ↗
27. Electromigration in metals10.1088/0034-4885/52/3/002 ↗
28. Athermal recrystallization behavior of (Sn) solid-solution at an intermetallic-free Cu/Sn interface induced by room temperature electromigration10.1016/j.matlet.2018.11.034 ↗
29. Non-equilibrium supersaturation behavior in a Cu/Sn/Cu interconnect induced by room temperature electromigration10.1016/j.jallcom.2019.03.055 ↗
30. Accelerated Carbon Atoms Diffusion in bearing steel using electropulsing to reduce spheroidization processing time and improve microstructure uniformity10.1002/srin.202000041 ↗
31. Softening behavior of Al-Zn-Mg alloys with different strengthening mechanisms in a coupled field10.1016/j.msea.2019.138582 ↗
32. The mechanism of plastic deformation of crystals. Part I. Theoretical
33. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
34. Hall-Petch relationship in electrically pulsed Al-Zn-Mg alloys10.1002/adem.201900638 ↗
35. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗