journal article·2021-09

Analyzing the influence of a deep cryogenic treatment on the mechanical properties of blanking tools by using the short-time method PhyBaLCHT

B. Blinn, S. Winter, M. Weber, M. Demmler, V. Kräusel, T. Beck

Publisher page

Abstract

Abstract Deep cryogenic treatment (DCT) is a promising post-process for increasing the service lifetime of highly loaded tools. However, the process parameters as well as the position of DCT during thermal post-processing have to be adapted on the materials used, leading to high experimental effort, costs and time to optimize and validate this kind of thermal treatment. Therefore, efficient methods to analyze the mechanical properties of materials treated with DCT are of great industrial and scientific interest. In this context, the short-time method PhyBaLCHT, which is based on instrumented cyclic indentation tests, is a promising approach, as it enables a rapid determination of the cyclic deformation behavior and hardness of a material. Consequently, in the presented work different material conditions of the thermally treated tool steels 1.2379 (X155CrVMo12-1; AISI D2) and Vanadis 4E (140CrMoVMnSi19-35-37) were characterized by using cyclic indentation testing. The different conditions were realized by performing different sequences of thermal post-processing, containing quenching, tempering and DCT. The results obtained in cyclic indentation tests show for both materials slightly lower hardness but significantly higher cyclic plasticity of the material conditions treated with DCT antecedent to the tempering process compared to conventionally quenched and tempered material. In additionally performed blanking tests, this further results in an increased wear resistance of cryogenically treated conditions. Because of the higher cyclic plasticity, the reduction of local stress intensities at the cutting edges caused by plastic deformation is more pronounced for the cryogenically treated tools, which results in decreased wear rate as well as less pronounced breaking of the cutting edges. Consequently, the presented results demonstrate that the PhyBaLCHT method is a powerful means to characterize the mechanical properties of cryogenically treated materials and enables an estimation of the wear characteristics of highly loaded tools.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Enhancing the wear resistance of case carburized steel (En 353) by cryogenic treatment10.1016/j.cryogenics.2005.10.004 ↗
2. Evaluation of factors influencing deep cryogenic treatment that affect the properties of tool steels10.1016/j.jmatprotec.2010.07.007 ↗
3. Microstructure and tensile properties of 45WCrV7 tool steel after deep cryogenic treatment10.1016/j.msea.2013.07.057 ↗
4. Sub-zero treatments of AISI D2 steel: Part I. Microstructure and hardness10.1016/j.msea.2009.10.070 ↗
5. Sub-zero treatments of AISI D2 steel: Part II. Wear behavior10.1016/j.msea.2009.10.071 ↗
6. Increase of lifetime for fine blanking tools10.1016/j.proeng.2017.04.009 ↗
7. Effects of cryogenic treatment on the microstructure and mechanical properties of high-alloyed tool steels10.3139/105.110422 ↗
8. Vacuum heat treatment, deep cryogenic treatment and simultaneous pulse plasma nitriding and tempering of P/M S390MC steel10.1016/j.msea.2011.10.044 ↗
9. The influence of deep cryogenic treatment on the properties of high-vanadium alloy steel10.1016/j.msea.2016.03.039 ↗
10. Comparison of effects of cryogenic treatment on different types of steels: a review
11. Deep cryogenic treatment of cold work tool steel
12. Effect of deep cryogenic treatment on the mechanical properties of AISI D3 tool steel10.1504/IJMATEI.2019.099789 ↗
13. Low-temperature martensitic transformation and deep cryogenic treatment of a tool steel10.1016/j.msea.2010.07.056 ↗
14. Low-temperature martensitic transformation in tool steels in relation to their deep cryogenic treatment10.1016/j.actamat.2012.11.045 ↗
15. Optimization of the duration of cryogenic processing to maximize wear resistance of AISI D2 steel10.1016/j.cryogenics.2009.01.002 ↗
16. Effect of cryogenic treatment on tool steels10.21474/IJAR01/3602 ↗
17. Microstructure of cryogenic treated M2 tool steel10.1016/S0921-5093(02)00165-X ↗
18. Effects of deep cryogenic treatment on microstructural evolution and alloy phases precipitation of a new low carbon martensitic stainless bearing steel during aging10.1016/j.msea.2018.07.012 ↗
19. Cyclic hardness test PHYBALCHT – short-time procedure to evaluate fatigue properties of metallic materials10.1016/j.ijfatigue.2014.01.009 ↗
20. PhyBaLCHT – influence of indentation force on the results of cyclic hardness tests and investigations of comparability to uniaxial fatigue loading10.1016/j.ijfatigue.2018.09.025 ↗
21. Study on the indentation size effect in CaF2: dislocation structure and hardness10.1016/j.actamat.2008.11.015 ↗
22. Indentation size effect in metallic materials: correcting for the size of the plastic zone10.1016/j.scriptamat.2005.02.009 ↗
23. High cycle fatigue behavior of high-Mn TWIP steel with different surface morphologies10.1016/j.ijfatigue.2020.105499 ↗
24. Characterization of the precipitation behavior and resulting mechanical properties of copper-alloyed ferritic steel10.1016/j.msea.2019.138807 ↗
25. Influence of different precipitation states of Cu on the quasi-static and cyclic deformation behavior of Cu alloyed steels with different carbon contents10.1016/j.ijfatigue.2020.105587 ↗
26. Influence of Cu precipitates and C content on the defect tolerance of steels10.1016/j.ijfatigue.2020.106042 ↗