journal article·2021-08

Examining the unloading behavior of dual-phase steels by means of microstructure simulations

Tobias Robl, Christian Krempaszky, Alexander Fillafer, Ewald Werner

Publisher page

Abstract

Abstract Ferritic–martensitic dual-phase (DP) steels exhibit a pronounced nonlinear unloading behavior, which is subjected to strong variations and depends on the complex interaction of parameters of the sheet metal material production process and the resulting heterogeneous microstructure. The knowledge of the unloading behavior in dependence of the governing parameters and their underlying mechanisms play a crucial role in sheet metal forming of high strength dual-phase steels. To analyze the influence of individual parameters on the unloading behavior of dual-phase steels, computational studies on the microstructure level were carried out based on the finite element method. The investigated parameters included microstructural parameters, unloading rate and thermo-mechanical deformation history caused by sheet production. In the course of the simulations, numerous different periodic volume elements were uniaxially loaded and unloaded. The computational results demonstrate that residual stresses of type II in the microstructure cannot fully explain the nonlinear unloading behavior of the steels. The reversible slip of dislocations in ferrite also plays an important role. Of all parameters examined, the martensite volume fraction and the phase strength contrast have the largest impact on the unloading behavior. Furthermore, the distribution of martensite in the microstructure significantly affects the unloading behavior, as well as residual stresses and a plastic pre-deformation both caused by the sheet production.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Kalpakjian · 2011
2. Maßgeschneiderte Dualphasenstähle für Front- und Seiten-Lastfälle
3. Springback analysis of high strength dual-phase steels10.1016/j.proeng.2014.10.127 ↗
4. Springback simulation of advanced high strength steels considering nonlinear elastic unloading-reloading behavior10.1016/j.matdes.2015.09.012 ↗
5. On the non-linear unloading behavior of a biaxially loaded dualphase steel sheet10.1016/j.ijmecsci.2018.02.015 ↗
6. Experimental and numerical investigation of springback effect for advanced high strength dual phase steel10.1016/j.matdes.2012.02.055 ↗
7. Abhängigkeit des E-Moduls verschiedener Stähle vom Umformgrad10.1007/s00501-019-0888-z ↗
8. A study of the unloading behaviour of dual phase steel10.1016/j.msea.2014.02.069 ↗
9. Springback prediction and reduction in deep drawing under influence of unloading modulus degradation10.1007/s12289-015-1248-5 ↗
10. Mechanical behavior of advanced high strength steel at high strain rates10.4028/www.scientific.net/AMM.82.178 ↗
11. The effect of microstructure and pre-strain on the change in apparent young’s modulus of a dual-phase steel10.1007/s11665-017-2754-z ↗
12. Effect of martensite content, its dispersion, and epitaxial ferrite content on bauschinger behaviour of dual phase steel10.1179/026708302225001679 ↗
13. Fillafer · 2017
14. On strain partitioning and micro-damage behavior of dual-phase steels10.1016/j.msea.2014.07.029 ↗
15. On phase transformation induced effects controlling the initial flow behavior of ferritic-martensitic dual-phase steels10.1016/j.msea.2017.10.005 ↗
16. Liedl · 2006
17. An unexpected feature of the stress–strain diagram of dual-phase steel10.1016/S0927-0256(02)00256-2 ↗
18. Initial flow behavior of dual-phase steels
19. A note on the diffusion of carbon atoms to dislocations10.1016/j.commatsci.2006.01.010 ↗
20. Inelastic effects on springback in metals10.1016/S0749-6419(01)00054-7 ↗
21. Bake hardening effect in components
22. Quantification of dislocation structures from anelastic deformation behaviour10.1016/j.actamat.2016.05.040 ↗
23. Levy · 2006
24. Microstructure-based modelling of multiphase materials and complex structures10.1007/s00161-015-0477-7 ↗
25. Properties of random polycrystalline two-phase materials10.1115/1.3122817 ↗
26. Exner · 1986
27. de Borst · 2014
28. Lippmann · 1981
29. Smith · 2014
30. Cowper · 1957
31. Iron and its dilute substitutional solid solutions10.1007/BF02680580 ↗
32. S. Münstermann, Einflussgrößen auf den Elastizitätsmodul von Stählen für den Fahrzeugbau (AVIF A 188), Frankfurt a. Main, 2004.10.3139/120.100663 ↗
33. Martensite crystallography and chemistry in dual phase and fully martensitic steels10.1016/j.matchar.2018.03.011 ↗
34. DAMASK - The Düsseldorf Advanced Material Simulation Kit for modelling multi-physics crystal plasticity, damage and thermal phenomena from the single crystal up to the component scale10.1016/j.commatsci.2018.04.030 ↗
35. The tensile fracture of ferritic-martensitic carbon steels10.1016/0025-5416(82)90131-8 ↗