journal article·2021-05Open access

Simulation and measurement of residual stress and warpage in a HgCdTe-based infrared detector at 100 K

Lucas Duperrex, Raphaël Pesci, Pascal Le Boterf, Olivier Mailliart

Abstract

Abstract A thermomechanical analysis on a 320 × 256, 30 μm pitch, middle wave infrared detector operating at 100 K is conducted. The stress induced in the HgCdTe single crystal layer needs to be minimized to avoid electro-optical perturbations and the planarity of the detector has to respect strict optical requirements. The work includes stress determination by X-ray-diffraction (XRD), warpage measurements with laser scanning, analytical calculation and finite-element modelling. The hybridized detector is studied both alone and after being glued to an AlN hosting substrate. The results show that the initial stress in HgCdTe at room temperature is biaxial for all samples, with either tensile or compressive values (±10 MPa), mainly due to the lattice mismatch during epitaxy from CdZnTe. A stress increase of +45 MPa is induced after cooling to 100 K, with a maximum value of 57 MPa. The warpage of the hybridized circuit is then about 2.5 μm and is reduced after being glued to the hosting substrate. Finally, the model is used to extrapolate the behavior of such a detector for larger formats until 2 K2; there is no significant impact on the stress in the HgCdTe layer, but warpage increases proportionally to the squared diagonal of the detector.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Semiconductor Detectors and Materials · Thermography and Photoacoustic Techniques · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Type-II superlattice photodetectors versus HgCdTe photodiodes10.1016/j.pquantelec.2019.100228 ↗
2. The future of infrared; III–Vs or HgCdTe ?10.1007/s11664-015-3717-5 ↗
3. Mechanical properties and material removal characteristics of soft-brittle HgCdTe single crystals10.1016/j.msea.2012.08.129 ↗
4. Cadmium zinc telluride and its use as a nuclear radiation detector material10.1016/S0927-796X(01)00027-4 ↗
5. Development and production of the H4RG-15 focal plane array
6. High-operating temperature HgCdTe: a vision for the near future10.1007/s11664-016-4566-6 ↗
7. Elastic and plastic deformation in low mismatched CdxHg1-xTe/Cd1-yZnyTe10.1016/S0022-0248(96)00986-4 ↗
8. Strain determination in quasi-lattice-matched LWIR HgCdTe/CdZnTe layers10.1007/s11664-013-2682-0 ↗
9. X-ray diffraction residual stress measurement at room temperature and 77 K in a microelectronic multi-layered single-crystal structure used for infrared detection10.1007/s11664-018-6560-7 ↗
10. Multilayer CdHgTe-based infrared detector: 2D/3D microtomography, synchrotron emission and finite element modelling with stress distribution at room temperature and 100 K10.1016/j.mtla.2019.100511 ↗
11. Modeling and deformation analyzing of InSb focal plane arrays detector under thermal shock10.1016/j.infrared.2013.12.004 ↗
12. Assessment of InSb infrared detector arrays assembly procedure employing ANSYS
13. The tension of metallic films deposited by electrolysis10.1098/rspa.1909.0021 ↗
14. Analysis of bi-metal thermostats10.1364/JOSA.11.000233 ↗
15. Erich-Schmid-Institut f. Festkörperphysik10.1154/S0376030800010181 ↗
16. Mercury Cadmium Telluride - Growth, Properties and Applications
17. Three-dimensional versus two-dimensional finite element modeling of flip-chip packages10.1115/1.2792684 ↗
18. Three-Dimensional thermomechanical simulation of fine-pitch high-count ball grid array flip-chip assemblies10.1007/s11664-013-2669-x ↗
19. Calculated elastic constants for stress problems associated with semiconductor devices10.1063/1.1661935 ↗
20. Young's modulus, shear modulus, and Poisson's ratio in silicon and germanium10.1063/1.1713863 ↗
21. Ueber die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper10.1002/andp.18892741206 ↗
22. Y. Touloukian, Thermophysical properties of matter - the TPRC data series - thermal expansion, 70s.
23. Size and surface orientation effects on thermal expansion coefficient of one-dimensional silicon nanostructures10.1063/1.3126499 ↗
24. Measurement of the temperature coefficient of Young's modulus of single crystal silicon and 3C silicon carbide below 273 K using micro-cantilevers10.1016/j.sna.2013.04.032 ↗
25. Temperature dependence of the force sensitivity of silicon cantilevers10.1103/PhysRevB.69.045403 ↗
26. Thermal expansion coefficient and bond strength in Hg1-xCdxTe and Hg1-xZnxTe10.1002/pssb.2221770205 ↗
27. Determination of HgCdTe elasto-plastic properties using nanoindentation10.1007/s11664-006-0241-7 ↗
28. The elastic constants and thermal expansion of single-crystal CdTe10.1088/0022-3727/6/5/315 ↗
29. Thermal expansion of some diamondlike crystals10.1063/1.321373 ↗
30. The temperature dependence of the Young's modulus of MgSiN2, AlN and Si3N410.1016/S0955-2219(00)00210-7 ↗
31. Influence of stress state and temperature on the strength of epoxy resins
32. Tensile strength and ductility of indium10.1016/0025-5416(88)90578-2 ↗
33. Unusual tensile behaviour of fibre-reinforced indium matrix composite and its in-situ TEM straining observation10.1016/j.actamat.2015.10.003 ↗
34. Impact of mold compound cure shrinkage on substrate block warpage simulation
35. Measurements of the mechanical stress induced in flip chip dies by the underfill and simulation of the underlying phenomena of thermal-mechanical and chemical reactions