journal article·2021-02

Evolution of nano-scaled lamellae and its effect on strength of Ti–Ta composite

Shenghang Xu, Jingwen Qiu, Huibin Zhang, Yong Liu

Publisher page

Abstract

Abstract Introduction of nanoscale lamellae is an efficient way to improve the mechanical performance of alloys/composites. Here, we present a convenient and available approach to introduce nanoscale metallic lamellae into Ti–Ta based composites via spark plasma sintering and subsequent hot rolling. The formed lamellae originate from ultra-fine Ta powder with the particle size of less than 2 μm. Ti–Ta nanoscale lamellae consist of alternating Ti- and Ta-enriched lamellae with a body-centered cubic interface resulting from the effect of partial diffusion, as revealed by transmission electron microscopy. The nanoscale lamellae can significantly impede the motion of dislocations and thus effectively improve the strength of the Ti–Ta composite. The strength enhanced by nanoscale lamellae reaches up to 136.18 MPa when the total deformation degree is 60%. The manufacturing route developed here is versatile, capable of making high performance composites with nanoscale lamellae.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Cemal Cem Tasan, Bone-like crack resistance in hierarchical metastable nanolaminate steels10.1126/science.aal2766 ↗
2. Creep of binary Fe-Al alloys with ultrafine lamellar microstructures10.1016/j.intermet.2017.07.016 ↗
3. Damage tolerance assessment by bend and shear tests of two multilayer composites: glass fibre reinforced metal laminate and aluminium roll-bonded laminate10.1016/j.compscitech.2008.10.010 ↗
4. Designing highly toughened hybrid composites through nature-inspired hierarchical complexity10.1016/j.actamat.2009.03.003 ↗
5. Zhang · 2019
6. Nano-lamellar/nano-tubular hierarchical porous structure produced by selective dissolution and anodization of lamellar Ti-40at.% Al alloy10.1016/j.matlet.2014.11.059 ↗
7. A state-of-the-art review on passivation and biofouling of Ti and its alloys in marine environments10.1016/j.jmst.2017.11.021 ↗
8. Microstructure and mechanical properties of Ti-15Mo-xTiC composites fabricated by in-situ reactive sintering and hot swaging10.1016/j.jallcom.2017.12.124 ↗
9. Mechanical properties of copper/bronze laminates: role of interfaces10.1016/j.actamat.2016.06.023 ↗
10. Plastic deformation mechanism of Ti-Nb-Ta-Zr-O alloy at cryogenic temperatures10.1016/j.msea.2019.138293 ↗
11. Development of high-strength, good-conductivity Cu/Ti bulk nano-layered composites by a combined roll-bonding process10.1016/j.jallcom.2017.01.048 ↗
12. High-temperature oxidation mechanisms of nano-/submicro-scale lamellar structures in an intermetallic alloy10.1016/j.scriptamat.2019.06.028 ↗
13. Heavily cold drawn iron wires: role of nano-lamellae in enhancing the tensile strength10.1016/j.msea.2020.140017 ↗
14. Deformation and failure of shocked bulk Cu-Nb nanolaminates10.1016/j.actamat.2013.10.019 ↗
15. Structural characteristics of Cu/Ti bimetal composite produced by accumulative roll-bonding (ARB)10.1016/j.matdes.2016.09.094 ↗
16. Texture evolution of the Mg/Al laminated composite by accumulative roll bonding at ambient temperature10.1016/S1875-5372(13)60044-2 ↗
17. Entrance analysis of 7075 Al/Mg-Gd-Y-Zr/7075 Al laminated composite prepared by hot rolling and its mechanical properties10.1016/j.matdes.2010.10.030 ↗
18. Effect of thermal treatment on adhesion strength of Cu/Ni-Cr/polyimide flexible copper clad laminate fabricated by roll-to-roll process10.1016/j.mee.2010.06.044 ↗
19. Influence of the thermomechanical processing on the fracture mechanisms of high strength aluminium/pure aluminium multilayer laminate materials10.1016/j.msea.2008.01.034 ↗
20. Research progress in metal-metal laminated structural composites
21. Bio-mimic Ti-Ta composite with hierarchical “Brick-and-Mortar” microstructure10.1016/j.mtla.2019.100463 ↗
22. A nano lamella NbTi-NiTi composite with high strength10.1016/j.msea.2015.03.010 ↗
23. Recent development of vacancy formation energy10.4028/www.scientific.net/AMM.456.429 ↗
24. Plastic anisotropy and associated deformation mechanisms in nanotwinned metals10.1016/j.actamat.2012.09.052 ↗
25. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
26. Coupled annealing temperature and layer thickness effect on strengthening mechanisms of Ti/Ni multilayer thin films10.1016/j.jmps.2015.12.005 ↗
27. Compositionally gradient Ti-Ta metal-metal composite with ultra-high strength10.1016/j.msea.2017.11.089 ↗
28. Shear band formation and ductility in nanotwinned Cu10.1016/j.scriptamat.2011.09.002 ↗