NbC precipitation during two-pass hot deformation of a nickel-based model alloy at 700 °C: Experiments and modelling
Source abstract
Abstract
Abstract Precipitation behavior during two-pass hot-deformation has been investigated in a 70Ni–30Fe–Nb–C model alloy. Samples were deformed at 700 °C and annealed for different times after each deformation pass. The deformed microstructure consisted of cell-like dislocation structures as well as ill-defined microbands and dislocation tangles. Annealing resulted in recovery, with no evidence of recrystallization. Precipitates nucleated heterogeneously on dislocations only after the first deformation pass. A physics-based nucleation, growth and coarsening model was used to rationalize the precipitation behavior. The analysis suggests that precipitation does not take place after the second pass due to the depletion of the thermodynamic driving force. Even when precipitate nucleation is possible after the second pass, the newly formed precipitates quickly become subcritical and dissolve due to the presence of large precipitates that formed after the first deformation pass.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Interaction between recovery, recrystallization, and NbC strain-induced precipitation in high-Mn steels10.1007/s11661-015-3066-2 ↗
2. Recrystallization, precipitation behaviors, and refinement of austenite grains in high Mn, high Nb steel10.1007/s11661-011-0895-5 ↗
3. Microalloyed steels10.1179/1743281215Y.0000000063 ↗
4. Effect of austenite deformation temperature on Nb clustering and precipitation in microalloyed steel10.1016/j.scriptamat.2013.11.026 ↗
5. Effect of niobium clustering and precipitation on strength of an NbTi-microalloyed ferritic steel10.1016/j.msea.2014.03.140 ↗
6. Microstructural and precipitation characterization in Nb-Mo microalloyed steels: estimation of the contributions to the strength10.1007/s12540-014-5002-1 ↗
7. Strain induced precipitation of complex carbonitrides in Nb–V and Ti–V microalloyed steels10.1016/j.scriptamat.2005.07.003 ↗
8. Suppression of strain-induced precipitation of NbC by epitaxial growth of NbC on pre-existing TiN in Nb-Ti microalloyed steel10.1016/j.matdes.2017.07.006 ↗
9. Quantitative modeling and experimental verification of carbide precipitation in a martensitic Fe-0.16 wt%C-4.0 wt%Cr alloy
10. Dissolution and precipitation behaviour in steels microalloyed with niobium during thermomechanical processing10.1016/j.actamat.2015.06.057 ↗
11. A stress-relaxation method for following carbonitride precipitation in austenite at hot-working temperatures10.1007/BF02674014 ↗
12. Abnormal and post-abnormal austenite grain growth kinetics in Nb-Ti microalloyed steels10.1179/1879139511Y.0000000002 ↗
13. High resolution moire imaging of small precipitates10.1557/PROC-62-229 ↗
14. On the Zener drag10.1016/0001-6160(85)90214-7 ↗
15. Humphreys · 1996
16. Courtney · 1990
17. Gladman · 1997
18. Nagarajan · 2011
19. New approach for modelling strain induced precipitation of Nb(C,N) in HSLA steels during multipass hot deformation in austenite10.1179/174328409X455242 ↗
20. Hot deformation characteristics of Alloy 617B nickel-based superalloy: a study using processing map10.1016/j.jallcom.2015.05.192 ↗
21. Orientation dependence of the substructure characteristics in a Ni-30%Fe austenitic alloy deformed in hot torsion10.4028/www.scientific.net/MSF.753.54 ↗
22. NbC precipitation during multi-pass deformation of a nickel-based model alloy: experiments and modelling10.1016/j.msea.2019.138748 ↗
23. Influence of predeformation and ageing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress10.1016/S1359-6454(98)00296-1 ↗
24. Modelling the kinetics of strain induced precipitation in Nb microalloyed steels10.1016/S1359-6454(00)00389-X ↗
25. Microband formation in shock-loaded and quasi-statically deformed metals10.1016/0001-6160(89)90206-X ↗
26. Theory of plastic deformation: - properties of low energy dislocation structures10.1016/0921-5093(89)90290-6 ↗
27. The effect of carbon and nickel upon the stacking-fault energy of iron10.1179/msc.1967.1.1.123 ↗
28. Dynamic precipitation and solute hardening in a titanium microalloyed steel containing 3 levels of manganese10.1016/0001-6160(84)90070-1 ↗
29. Gibbs-Thomson effects in phase transformations10.1016/j.scriptamat.2004.12.026 ↗
30. Modeling recrystallization of microalloyed austenite: effect of coupling recovery, precipitation and recrystallization10.1016/S1359-6454(02)00097-6 ↗
31. Precipitation hardening10.1016/0079-6425(63)90010-0 ↗
32. Stress strain behavior of ferrite and bainite with nano-precipitation in low carbon steels10.1016/j.actamat.2014.10.010 ↗
33. Recovery revisited10.1016/0956-7151(94)00409-9 ↗
34. Frost · 1982
35. Data set for diffusion coefficients and relative creep rate ratios of 26 dilute Ni-X alloy systems from first-principles calculations10.1016/j.dib.2018.08.144 ↗
36. Zurob · 2003
37. Lateral growth in solid‐solid phase transformations10.1063/1.1659770 ↗
38. Multimodal size distributions of gamma ' precipitates during continuous cooling of UDIMET 720 Li10.1016/j.actamat.2009.08.002 ↗
39. Formation of multimodal size distributions of gamma ' in a nickel-base superalloy during interrupted continuous cooling10.1016/j.scriptamat.2007.06.014 ↗
40. Heat treatment of UDIMET 720Li: the effect of microstructure on properties10.1016/S0921-5093(98)00867-3 ↗