Numerical inverse engineering as a route to determine the dynamic mechanical properties of metallic cellular solids
Source abstract
Abstract
Abstract Metallic cellular solids are recognized for their high strength to weight ratio, being desirable for applications in the transportation industries to reduce fuel consumption and emissions. Although, there have been significant developments in the manufacturing of these materials and in the prediction of their static mechanical properties, their dynamic behavior (e.g. harmonic response and damping ratio) is still difficult to characterize by direct methods. This is due to the usual complex shape and low damping of metallic cellular solids and the inclusion of external damping by the instrumentation in vibration tests. This study presents an indirect method, based on a numerical inverse engineering approach, to determine the true apparent modulus and damping ratio of metallic cellular solids. For validation purposes, the proposed method was applied to Al-based non-stochastic cellular solids manufactured by investment casting with different architectures, being determined that their dynamic apparent modulus (1.4–217.2 MPa) is significantly different from the static structural results. The damping ratios of these samples were also successfully determined (0.002–0.011) and it is shown that these values are within the expected range for this aluminum based cellular solids.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Acoustic Wave Phenomena Research · Vibration and Dynamic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Architectural effect on 3D elastic properties and anisotropy of cubic lattice structures, Materials & Design
2. Cellular solids: structure and properties
3. Experimental study on the closed-cell aluminum foam shock absorption layer of a high-speed railway tunnel10.1016/j.soildyn.2019.01.012 ↗
4. Out of plane crushing and local stiffness determination of proposed foam filled sandwich panel for Korean Tilting Train eXpress – numerical study10.1016/j.matdes.2014.07.037 ↗
5. The impact performance of honeycomb-filled structures under eccentric loading for subway vehicles,10.1016/j.tws.2017.10.031 ↗
6. A review of multifunctional structure technology for aerospace applications,10.1016/j.actaastro.2015.11.024 ↗
7. Fracture mechanics of cellular solids
8. Chapter 1-composite materials in the Aeronautical industry
9. Compliant cellular structures: Application to a passive morphing airfoil10.1016/j.compstruct.2013.07.013 ↗
10. Light-metal foams—history of innovation and technological challenges10.1002/adem.201200217 ↗
11. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
12. Commercial Applications of metal foams: Their properties and production10.3390/ma9020085 ↗
13. Piezoelectric composite lattices with high sensitivity
14. Particle size and fraction required to stabilise aluminium alloy foams created by gas injection10.1016/j.scriptamat.2018.04.041 ↗
15. Compressive performance and deformation mechanism of the dynamic gas injection aluminum foams10.1016/j.matchar.2018.10.013 ↗
16. Fabrication and investigation of influence of CaCO3 as foaming agent on Al-SiCp foam10.1080/10426914.2018.1532093 ↗
17. Fabrication and properties of newly developed Ti35Zr28Nb scaffolds fabricated by powder metallurgy for bone-tissue engineering10.1016/j.jmrt.2019.06.021 ↗
18. Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique10.1016/j.biomaterials.2008.05.032 ↗
19. Fabrication of metallic biomedical scaffolds with the space holder method: A review,10.3390/ma7053588 ↗
20. Dynamic compression of aluminium foam derived from infiltration casting of salt dough10.1016/j.mechmat.2015.10.012 ↗
21. Acoustic thermoset open-cell foams produced by particulate leaching process10.1007/s10853-019-03790-4 ↗
22. Influence of particle diameter in mechanical performance of Al expanded clay syntactic foams10.1016/j.compstruct.2017.10.040 ↗
23. Positive, zero and negative Poisson's ratio non-stochastic metallic cellular solids: dependence between static and dynamic mechanical properties10.1016/j.compstruct.2019.111239 ↗
24. Wire and arc additive manufacturing of aluminum alloy lattice structure10.1016/j.jmapro.2019.12.049 ↗
25. Review on characterization and impacts of the lattice structure in additive manufacturing
26. Laser additive manufacturing of bio-inspired lattice structure: forming quality, microstructure and energy absorption behavior10.1016/j.msea.2019.138857 ↗
27. Axisymmetric auxetics10.1016/j.compstruct.2018.07.116 ↗
28. Additive manufacturing assisted investment casting: A low-cost method to fabricate periodic metallic cellular lattices,
29. Micro laser metal wire deposition for additive manufacturing of thin-walled structures10.1016/j.optlaseng.2017.07.003 ↗
30. Acoustic resonance testing of additive manufactured lattice structures10.1016/j.addma.2018.10.034 ↗
31. Automated metrology and geometric analysis of additively manufactured lattice structures10.1016/j.addma.2019.05.026 ↗
32. Models for the elastic deformation of honeycombs10.1016/S0263-8223(96)00054-2 ↗
33. Effective elastic properties of periodic hexagonal honeycombs10.1016/j.mechmat.2015.07.008 ↗
34. On the elastic properties of three-dimensional honeycomb lattices10.1016/j.coco.2019.11.005 ↗
35. Transfer function method for investigating the complex modulus of acoustic materials: spring-like specimen10.1016/0022-460X(80)90380-6 ↗
36. Transfer function method for investigating the complex modulus of acoustic materials: rod-like specimen10.1016/0022-460X(82)90245-0 ↗
37. On the viscoelasticity of the polyurethane foam10.1121/1.412987 ↗
38. Mechanical testing of polymeric foams at low frequency10.1016/S0142-9418(00)00006-4 ↗
39. Dauchez · 2002
40. Frequency dependence of elastic properties of acoustic foams10.1121/1.1857527 ↗
41. Inverse estimation of the elastic and anelastic properties of the porous frame of anisotropic open-cell foams10.1121/1.4731222 ↗
42. A general methodology for inverse estimation of the elastic and anelastic properties of anisotropic open-cell porous materials—with application to a melamine foam10.1063/1.4865789 ↗
43. Practical non-linear vibration absorber design10.1016/S0022-460X(87)81383-4 ↗
44. The measurement of nonlinear damping in single-degree-of-freedom systems,10.1115/1.2930147 ↗
45. Dynamic wave dispersion and loss properties of conventional and negative Poisson's ratio polymeric cellular materials10.1177/026248938900800501 ↗
46. Micromechanical Analysis of dynamic behavior of conventional and negative Poisson's ratio foams10.1115/1.2806807 ↗
47. Hysteresis behaviour and specific damping capacity of negative Poisson's ratio foams10.1177/0262489319961505004 ↗
48. Mechanical performance of Auxetic polyurethane foam for antivibration glove Applications10.1177/026248930502400501 ↗
49. Vibration transmissibility and damping behaviour for auxetic and conventional foams under linear and nonlinear regimes, Smart Materials and Structures
50. Dynamic mechanical analysis applied to the characterisation of closed cell polyolefin foams10.1016/S0142-9418(99)00054-9 ↗
51. Carbon nano-ink coated open cell polyurethane foam with micro-architectured multilayer skeleton for damping applications10.1039/C6RA15868D ↗
52. Temperature variability of Poisson's ratio and its influence on the complex modulus determined by dynamic mechanical Analysis10.3390/technologies6030081 ↗
53. Damping properties of aluminium foams, materials science and engineering: A
54. Carneiro · Heat treatment as a route to tailor the yield-damping properties in A356 alloys, Materials Science and Engineering: A. · 2018 · 729 · 1
55. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
56. Description of damping and Applications
57. Radiation damping IN plates, induced BY porous media10.1006/jsvi.1998.1987 ↗
58. The effect of porosity on the microstructural damping response of 6061 aluminium alloy10.1007/BF00363342 ↗
59. Internal friction due to precipitation10.1002/pssb.19690320216 ↗
60. Internal friction in Al Ag Alloys10.1002/pssb.19690320104 ↗
61. Solution Treatment enhances both static and damping properties of Al–Si–Mg alloys10.1007/s11661-018-4961-0 ↗
62. Precipitation behavior and hardening effects of Si-containing dispersoids in Al–7Si–Mg alloy during solution treatment10.1016/j.matdes.2015.11.069 ↗
63. Analysis of the metastable precipitates in peak-hardness aged Al-Mg-Si(-Cu) alloys with differing Si contents10.1016/j.actamat.2017.04.037 ↗
64. Theory of mechanical damping due to dislocations10.1063/1.1722436 ↗
65. Direct determination of dynamic elastic modulus and Poisson's ratio of timoshenko rods
66. Dynamic vs. static Young's moduli: a case study10.1016/0921-5093(93)90634-Q ↗
67. Effect of stress on the dynamic modulus of concrete
68. Relations between static and dynamic moduli of sedimentary rocks10.1111/1365-2478.12711 ↗
69. Dynamic and static moduli of elasticity of resin-based materials10.1016/S0109-5641(01)00021-5 ↗
70. Inverse engineering approach to determine the elastic properties of lightweight expanded clay10.1016/j.conbuildmat.2019.04.264 ↗
71. Ashby · 2000
72. Anisotropic damping behavior of closed-cell aluminum foam10.1016/j.matdes.2009.06.038 ↗
73. Deformation and damping behaviors of foamed Al–Si–SiCp composite10.1016/S0921-5093(00)00789-9 ↗
74. Damping and sound absorption properties of particle reinforced Al matrix composite foams10.1016/S0266-3538(02)00215-4 ↗