journal article·2021-01

Strong resistance to hydrogen embrittlement via surface shielding in multi-layered austenite/martensite steel sheets

Min Cheol Jo, Min Chul Jo, Jisung Yoo, Taejin Song, Sang-Heon Kim, Seok Su Sohn, Sunghak Lee

Publisher page

Abstract

Abstract Layered architectures have been applied to twinning-induced plasticity (TWIP) steel in terms of configuring multi-layered TWIP and martensitic steel (MLS) sheets to overcome the limitation of low yield strength. However, hydrogen embrittlement (HE) inevitably appears in materials used for high-strength purposes, with the interfacial layers presenting localization sites of hydrogen, thereby limiting the materials’ broad structural applications. Here, we present a novel design for MLS sheets that exhibit both strong resistance to HE and a good strength–ductility balance via surface shielding. Our hydrogen penetration data demonstrates that the proposed austenitic shielding structure effectively acts as a barrier to hydrogen due to the reduced hydrogen diffusivity, compared with existing MLS sheets. We propose the optimal surface thickness required to play the role of shielding layer based on the quantified diffusivity and the rule of mixtures of the layer fractions, which presents a plausible novel design for layered architectures that exhibit strong resistance to HE and possess tunable mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. The conflicts between strength and toughness10.1038/nmat3115 ↗
2. Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
3. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
4. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper10.1126/science.1200177 ↗
5. Bone-like crack resistance in hierarchical metastable nanolaminate steels10.1126/science.aal2766 ↗
6. Heterogeneous and architectured materials: a possible strategy for design of structural materials10.1002/adem.200700289 ↗
7. Designing architectured materials10.1016/j.scriptamat.2012.04.033 ↗
8. Designing hybrid materials10.1016/S1359-6454(03)00441-5 ↗
9. Fracture elongation of brittle/ductile multilayered steel composites with a strong interface10.1016/j.scriptamat.2008.07.020 ↗
10. Decoupling the contributions of constituent layers to the strength and ductility of a multi-layered steel10.1016/j.actamat.2016.09.007 ↗
11. Tensile properties of cold-rolled TWIP-cored three-layer steel sheets10.1016/j.msea.2017.01.046 ↗
12. Development of multilayer steels for improved combinations of high strength and high ductility10.2320/matertrans.M2013382 ↗
13. Synergetic strengthening of layered steel sheet investigated using an in situ neutron diffraction tensile test10.1038/s41598-019-43369-2 ↗
14. Quantifying the synergetic strengthening in gradient material10.1016/j.scriptamat.2018.02.039 ↗
15. Synergetic strengthening by gradient structure10.1080/21663831.2014.935821 ↗
16. Role of layered structure in ductility improvement of layered Ti-Al metal composite10.1016/j.actamat.2018.05.005 ↗
17. The effect of grain size and grain orientation on deformation twinning in a Fe-22 wt% Mn-0.6 wt% C TWIP steel10.1016/j.msea.2010.02.041 ↗
18. Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel10.1016/j.actamat.2011.12.004 ↗
19. Effect of initial grain size on the microstructure and mechanical properties of high-pressure torsion processed twinning-induced plasticity steels10.1016/j.msea.2016.11.050 ↗
20. High Mn TWIP steels for automotive applications
21. High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development—properties—application10.1016/S0749-6419(00)00015-2 ↗
22. Relationship between grain size and ductile-to-brittle transition at room temperature in Fe–18Mn–0.6C–1.5Si twinning-induced plasticity steel10.1016/j.jallcom.2014.11.232 ↗
23. On the strain hardening and texture evolution in high manganese steels: experiments and numerical investigation10.1016/j.jmps.2013.08.007 ↗
24. Understanding and avoiding intergranular fracture characteristics of hadfield/hot-press-forming multi-layer steel sheets10.1007/s11661-019-05346-2 ↗
25. Revealing extraordinary strength and toughness of multilayer TWIP/Maraging steels10.1016/j.msea.2018.04.097 ↗
26. A novel strong and ductile TWIP/martensite steel composite10.1002/adem.201500113 ↗
27. Ultra-high strength and excellent ductility in multi-layer steel sheet of austenitic hadfield and martensitic hot-press-forming steels10.1016/j.msea.2019.05.046 ↗
28. Fabrication of hadfield-cored multi-layer steel sheet by roll-bonding with 1.8-GPa-strength-grade hot-press-forming steel10.1007/s12540-018-0081-z ↗
29. Hydrogen embrittlement in different materials: a review10.1016/j.ijhydene.2018.09.201 ↗
30. Hydrogen in trapping states innocuous to environmental degradation of high-strength steels10.2355/isijinternational.43.520 ↗
31. A new model for hydrogen-assisted cracking (hydrogen “embrittlement”)10.1007/BF02642048 ↗
32. Effect of hydrogen and stress concentration on the notch tensile strength of AISI 4135 steel10.1016/j.msea.2005.03.008 ↗
33. Effect of prestrain on hydrogen embrittlement susceptibility of EH 36 steels using in situ slow-strain-rate testing10.1007/s12540-018-00221-y ↗
34. Interphase strain gradients in multilayered steel composite from microdiffraction10.1007/s11661-013-2100-5 ↗
35. Suppressed deformation instability in the twinning-induced plasticity steel-cored three-layer steel sheet10.1016/j.actamat.2018.01.042 ↗
36. Improving ductility by increasing fraction of interfacial zone in low C steel/304 SS laminates10.1016/j.msea.2018.04.102 ↗
37. Back-stress effect on the mechanical strength of TWIP-IF steels layered sheet10.1007/s12540-019-00258-7 ↗
38. Interaction of aluminum with hydrogen in twinning-induced plasticity steel10.1016/j.scriptamat.2014.06.007 ↗
39. Effect of aluminum on hydrogen permeation of high-manganese twinning-induced plasticity steel10.1016/j.scriptamat.2014.11.023 ↗
40. The effect of vanadium micro-alloying on the microstructure and the tensile behavior of TWIP steel10.1016/j.msea.2017.04.083 ↗
41. 1991 · 261
42. 2004
43. The adsorption and diffusion of electrolytic hydrogen in palladium
44. The mechanism of dynamic strain aging for type A serrations in tensile flow curves of Fe-18Mn-0.55C (wt.%) twinning-induced plasticity steel10.1016/j.actamat.2020.02.020 ↗
45. Enhancing the resistance to hydrogen embrittlement of Al-containing medium-Mn steel through heavy warm rolling10.1016/j.scriptamat.2019.02.009 ↗
46. Comparative study on the effects of Cr, V, and Mo carbides for hydrogen-embrittlement resistance of tempered martensitic steel10.1038/s41598-019-41436-2 ↗
47. Microstructural influences on hydrogen delayed fracture of high strength steels10.1016/j.msea.2008.11.040 ↗
48. Important factors on the failure of pipeline steels with focus on hydrogen induced cracks and improvement of their resistance: review paper10.1007/s12540-019-00266-7 ↗
49. Evaluation of hydrogen content trapped by vanadium precipitates in a steel10.2355/isijinternational.43.534 ↗
50. Hydrogen absorption and embrittlement of ultra-high strength aluminized press hardening steel10.1016/j.msea.2018.08.003 ↗
51. Influence of vanadium on the hydrogen embrittlement of aluminized ultra-high strength press hardening steel10.1016/j.msea.2018.08.027 ↗
52. Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging10.1016/j.actamat.2013.04.030 ↗
53. Effect of grain size on the hydrogen diffusion process in steel using cellular automaton approach
54. Grain boundary effect on diffusion of hydrogen in pure aluminum10.2320/matertrans1989.32.1109 ↗
55. Grain boundary engineering approach to improve hydrogen embrittlement resistance in FeMnC TWIP steel10.1016/j.ijhydene.2018.04.048 ↗
56. Thermal desorption analysis of hydrogen in high strength martensitic steels10.1007/s11661-011-0909-3 ↗
57. The advantage of grain refinement in the hydrogen embrittlement of Fe–18Mn–0.6C twinning-induced plasticity steel10.1016/j.corsci.2015.01.012 ↗
58. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
59. An analysis of the tensile elongation to failure of laminated metal composites in the presence of strain-rate hardening10.1016/j.actamat.2011.12.041 ↗
60. Enhancement of bending formability of brittle sheet metal in multilayer metallic sheets10.1016/j.cirp.2010.03.109 ↗