Boosted mechanical properties of sintered MoLa alloys with ultrafine-grains by the nanostructuring of secondary phase
Source abstract
Abstract
Abstract The secondary phase particles of La2O3 play a crucial role in the determination of the yield strength over MoLa alloys, but few work focuses on their intrinsic modulation of shape and size. Herein, a nanostructuring strategy of the secondary phase particles is proposed to enhance the mechanical performances of MoLa alloys, in which the shape and size effects of secondary phase particles have been discussed. Moreover, the strengthening mechanism is also analyzed. It is found that the La2O3 nanospheres with a small size of 84 nm exhibit the best strengthening ability, leading to a high yield strength of 765 MPa in the sintered state. Smaller particles are easily involved into the Mo matrix interior to be intragranular, which are beneficial for the further strengthening. The strengthening contributions are quantitatively calculated, providing a predicted yield strength value, which is in good agreement with the measured one.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. The hotter the engine, the better10.1126/science.1179327 ↗
2. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility10.1038/nmat3544 ↗
3. Influences of annealing temperature on microstructure and mechanical properties of Mo–La2O310.1016/j.ijrmhm.2011.03.003 ↗
4. Ductilizing Mo–La2O3 alloys with ZrB2 addition10.1016/j.msea.2014.09.086 ↗
5. Effects of La2O3 content and rolling on microstructure and mechanical properties of ODS molybdenum alloys10.1007/s11665-017-2959-1 ↗
6. Secondary phases formation in lanthanum-doped titanium-zirconium- molybdenum alloy, J Alloy10.1016/j.jallcom.2018.05.103 ↗
7. Synthesis of high-performance Mo-La2O3 powder by hydrogen reduction of MoO2 originated from a self-reduction strategy10.1088/2053-1591/ab5a09 ↗
8. Strengthening mechanisms of Mo-La2O3 alloys processed by solid-solid doping and vacuum hot-pressing sintering10.1016/j.vacuum.2018.03.012 ↗
9. Effects of the lanthanum content on the microstructure and properties of the molybdenum alloy10.1016/j.ijrmhm.2016.09.012 ↗
10. Nanostructured oxide dispersion strengthened Mo alloys from Mo nanopowder doping with oxide nanoparticles10.1016/j.jmrt.2019.09.044 ↗
11. Coupling effect of intergranular and intragranular particles on ductile fracture of Mo–La2O3 alloys10.1016/j.msea.2015.05.032 ↗
12. Atomistic modelling of zirconium and silicon segregation at twist and tilt grain boundaries in molybdenum10.1007/s10853-015-9494-y ↗
13. Consolidation of stellite and its bonding to stainless steel by spark plasma sintering10.2497/jjspm.45.675 ↗
14. Consolidation of MA amorphous NiTi powders by spark plasma sintering10.1016/S0921-5093(97)00505-4 ↗
15. Effect of spark plasma sintering on densification, mechanical properties and micro-structure of alumina ceramics10.2497/jjspm.46.816 ↗
16. The mechanical properties and fracture mechanisms of wrought low carbon arc cast (LCAC), molybdenum–0.5 pct titanium–0.1 pct zirconium (TZM), and oxide dispersion strengthened (ODS) molybdenum flat products10.1016/j.msea.2005.11.030 ↗
17. Grain boundary segregation and intergranular fracture in molybdenum
18. An industrially feasible pathway for preparation of Mo nanopowder and its sintering behavior10.1016/j.ijrmhm.2019.105039 ↗
19. Master sintering curve concepts as applied to the sintering of molybdenum10.1007/s11661-006-0043-9 ↗
20. Computer simulation of final‐stage sintering: I, model kinetics, and microstructure10.1111/j.1151-2916.1990.tb06686.x ↗
21. German · 2010 · 3
22. Coarsening, densification, and grain growth during sintering of nano-sized powders—a perspective10.1016/j.ijrmhm.2016.09.004 ↗
23. Fracture toughness of sintered Mo–La2O3 alloy and the toughening mechanism10.1016/S0263-4368(99)00030-X ↗
24. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
25. Simultaneously increasing the ductility and strength of nanostructured alloys10.1002/adma.200600310 ↗
26. Mechanical behavior of nanocrystalline metals and alloys10.1016/j.actamat.2003.08.032 ↗
27. Microstructure and mechanical properties of multi-components rare earth oxide-doped molybdenum alloys10.1016/j.msea.2006.08.143 ↗
28. Experiment and multiscale modeling of the coupled influence of constituents and precipitates on the ductile fracture of heat-treatable aluminum alloys10.1016/j.actamat.2005.04.002 ↗
29. Heat treatment-modulated coupling effect of multi-scale second-phase particles on the ductile fracture of aged aluminum alloys10.1016/j.actamat.2006.08.026 ↗
30. Strengthening mechanisms in particulate metal matrix composites10.1016/0956-716X(91)90349-6 ↗
31. Ramesh · 2009
32. On the strength of discontinuous silicon carbide reinforced aluminum composites10.1016/0036-9748(86)90210-3 ↗
33. Shear lag models for discontinuous composites: fibre end stresses and weak interface layers10.1016/S0921-5093(99)00277-4 ↗