journal article·2021-01

Microstructure evolution and mechanical properties for rapidly solidified Cu–3Ag-0.5Zr alloy during isothermal compression

Guoliang Lv, Yan Feng, Richu Wang, Chaoqun Peng, Xiang Wu

Publisher page

Abstract

Abstract Rapidly solidified (RS) Cu–3Ag-0.5Zr alloy was prepared by hot isostatic pressing (HIP) and hot forging with rapid solidified alloy powder. Hot isothermal compressive deformation was conducted at room and elevated temperatures (400–900 °C) with a stable strain rate of 0.001/s. The mechanical properties and microstructure of alloy before compression and compression at different temperatures (400–900 °C) were investigated. The results show that the original Cu–3Ag-0.5Zr alloy has a 520 MPa compressive strength at room temperature, which is related to the small grain size (about 2 μm) of RS alloy and the interaction between second phases (Cu4AgZr, Ag particles) and dislocations. Compression at elevated temperatures (400–900 °C) will rise strength decreasing continuously and the compressive strength is just 23 MPa, specially Portevin Le-Chateliers (PLC) effect is observed after 700 °C, both of which results from the microstructure evolution of alloy at elevated temperatures. That the Ag particles will aggregate and grow up and dynamic recrystallization (DRX) is found at elevated temperatures. The two processes were both accelerated at higher temperature, which make the interaction between secondary phases and dislocations decreasing and finally the strength decreases. Portevin Le-Chateliers (PLC) effect is a result of intense interaction between DRX and plastic deformation. In addition, the discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX) occur simultaneously during compression at elevated temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Mechanical and electrical properties of mechanically alloyed nanocrystalline Cu–Nb alloys10.1016/j.actamat.2006.03.021 ↗
2. Size effects influence on conducting properties of Cu-Nb alloy microcomposites at cryogenic temperature10.1016/j.cryogenics.2018.01.010 ↗
3. Effect of silicon on microstructure and mechanical properties of Cu-Fe alloys10.1016/j.jallcom.2016.12.352 ↗
4. Mechanical and electrical responses of nanostructured Cu–3wt%Ag alloy fabricated by ECAP and cold rolling10.1016/j.jallcom.2010.02.198 ↗
5. Ductility degradation of vacuum-plasma-sprayed NARloy-Z at elevated temperatures10.1016/0921-5093(94)09710-0 ↗
6. Laser glazing of vacuum plasma spray coated10.1016/0257-8972(95)02441-7 ↗
7. Effect of Zr additions on the microstructure, and the mechanical and electrical properties of Cu–7 wt.%Ag alloys10.1016/j.msea.2006.07.121 ↗
8. Dynamic recrystallisation and precipitation behaviour of high strength and highly conducting Cu–Ag–Zr-alloys10.1016/j.msea.2013.12.051 ↗
9. Mechanical properties and microstructural stability of wrought, laser, and electron beam glazed NARloy-Z alloy at elevated temperatures10.1023/A:1018604513547 ↗
10. Effects of different preparation techniques on mechanical property and electrical conductivity of Cu-8wt% Ag alloy by continuous casting10.1016/S1875-5372(16)30161-8 ↗
11. Effect of heat treatments on microstructures and tensile properties of Cu–3 wt%Ag–0.5 wt%Zr alloy10.1007/s12540-018-0025-7 ↗
12. Microstructure and mechanical properties of rapidly solidified/powder metallurgy Mg–6Zn and Mg–6Zn–5Ca at room and elevated temperatures10.1016/j.jallcom.2013.01.066 ↗
13. Effect of aging temperature on precipitation behavior and mechanical properties of extruded AZ80-Ag alloy10.1016/j.jallcom.2015.06.126 ↗
14. Microstructure evolution and dynamic softening mechanisms during high-temperature deformation of a precipitate hardening Ni-based superalloy10.1016/j.vacuum.2018.06.068 ↗
15. Hot-workability of super-304H exhibiting continuous to discontinuous dynamic recrystallization transition10.1016/j.msea.2018.07.104 ↗
16. Mechanisms of DRX nucleation with grain boundary bulging and subgrain rotation during the hot working of nickel-based superalloys with columnar grains10.1016/j.jallcom.2019.01.334 ↗
17. A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel10.1007/s11661-010-0517-7 ↗
18. Hot working behavior of near-α alloy IMI83410.1016/j.msea.2004.12.005 ↗
19. Hot workability and constitutive model of the Cu-Zr-Nd alloy10.1016/j.vacuum.2017.09.017 ↗
20. Mechanical properties of a high strength Cu–Ta composite at elevated temperature10.1016/j.msea.2015.04.069 ↗
21. The serrated flow and recrystallization in dispersion hardened Cu–Cr–Nb alloy during hot deformation10.1016/j.msea.2016.07.014 ↗
22. Effects of annealing on microstructure and mechanical properties of rapidly solidified Cu-3 wt% Ag-1 wt% Zr10.1016/j.msea.2018.10.062 ↗
23. Precipitation location of secondary phase and microstructural evolution during static recrystallization of as-cast Ti-25V-15Cr-0.3Si titanium alloy10.1016/S1003-6326(18)64793-4 ↗
24. Effect of aging treatment on microstructure and mechanical properties of Cu–Ag alloys10.1016/j.jallcom.2006.12.073 ↗
25. Dynamic recrystallisation and precipitation behaviour of high strength and highly conducting Cu–Ag–Zr-alloys10.1016/j.msea.2013.12.051 ↗
26. Microstructures and elevated temperature properties of rapidly solidified Cu-3Ag-0.5Zr and Cu-3Ag-0.5Zr-0.4Cr-0.35Nb alloys10.1016/j.jallcom.2019.06.344 ↗
27. The deformation behavior and processing maps in the isothermal compression of 7A09 aluminum alloy10.1016/j.msea.2011.10.120 ↗
28. Microstructural inhomogeneities in Cu–Ag–Zr alloys due to heavy plastic deformation10.1016/j.msea.2009.08.036 ↗