Enhanced mechanical properties of alloyed copper matrix composites reinforced with partially-unzipped carbon nanotubes
Source abstract
Abstract
Abstract Sufficient interfacial contact and adhesion are important factors for ensuring effective load transfer in carbon nanotubes (CNTs)-reinforced copper matrix composites (CMCs). In this study, a chemical unzipping method and matrix-alloying (addition of Cr) were integrated to solve these two challenges in CMCs. The results showed that partially-unzipped CNTs (PUCNTs) improved the restricted interfacial contact areas of CNTs. Furthermore, the graphene layers of PUCNTs might improve the interfacial shear strength, and fully utilize the load transfer capacity of the inner walls. Trace amounts of interfacial carbides (Cr7C3 or Cr23C6) were formed in situ at the PUCNTs/CuCr interface, which further improved the interfacial bonding between PUCNTs and the CuCr matrix. The ultimate tensile strength (382.9 MPa) and elongation (37.02%) of the 2 vol% PUCNTs/CuCr composite were higher than similar reported materials. A balance between the strength and ductility of the PUCNTs/CuCr composites was obtained. This was ascribed to the combined effects of the interfacial carbides and interfacial contact area, which improved the load transfer ability and interfacial adhesion, and also promoted dislocation accumulation ability of the PUCNTs. The strengthening effect of PUCNTs was also investigated using the correctional shear-lag strengthening and dislocation strengthening models. This work shows that PUCNTs are better reinforcement fillers than CNTs for enhancing the mechanical properties of CMCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Tribological application of carbon nanotubes in a metal-based composite coating and composites10.1016/S0008-6223(02)00265-8 ↗
2. Effect of CNT decoration with silver nanoparticles on electrical conductivity of CNT-polymer composites10.1016/j.carbon.2008.06.048 ↗
3. Tensile strength and electrical conductivity of carbon nanotube reinforced aluminum matrix composites fabricated by powder metallurgy combined with friction stir processing10.1016/j.jmst.2014.04.016 ↗
4. A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites10.1016/j.jiec.2014.03.022 ↗
5. Effect of dispersion method on the deterioration, interfacial interactions and re-agglomeration of carbon nanotubes in titanium metal matrix composites10.1016/j.matdes.2015.08.112 ↗
6. Improving the mechanical properties of carbon nanotubes reinforced pure aluminum matrix composites by achieving non-equilibrium interface10.1016/j.matdes.2017.01.096 ↗
7. Interface and interfacial reactions in multi-walled carbon nanotube-reinforced aluminum matrix composites10.1016/j.carbon.2015.10.016 ↗
8. Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites10.1016/j.carbon.2016.12.013 ↗
9. Strengthening and toughening of carbon nanotube reinforced alumina nanocomposite fabricated by molecular level mixing process10.1016/j.scriptamat.2005.06.011 ↗
10. Effect of increasing the strength of aluminum matrix nanocomposites reinforced with microadditions of multiwalled carbon nanotubes coated with TiC nanoparticles10.3390/nano9111596 ↗
11. An electroless plating and planetary ball milling process for mechanical properties enhancement of bulk CNTs/Cu composites10.1016/j.jallcom.2017.05.208 ↗
12. A study on the CNTs-Ag composites prepared based on spark plasma sintering and improved electroless plating assisted by ultrasonic spray atomization10.1016/j.jallcom.2017.12.066 ↗
13. Improvement of interface and mechanical properties in carbon nanotube reinforced Cu–Cr matrix composites10.1016/j.matdes.2012.09.027 ↗
14. Kevlar®-functionalized graphene nanoribbon for polymer reinforcement10.1016/j.polymer.2014.03.059 ↗
15. Longitudinal unzipping of carbon nanotubes to form graphene nanoribbons10.1038/nature07872 ↗
16. Leaf-Like graphene oxide with a carbon nanotube midrib and its application in energy storage devices10.1002/adfm.201300130 ↗
17. Synthesis and electrochemical investigation of polyaniline/unzipped carbon nanotube composites as electrode material in supercapacitors10.1016/j.synthmet.2014.10.033 ↗
18. Graphene nanoribbons derived from the unzipping of carbon nanotubes: controlled synthesis and superior lithium storage performance10.1021/jp410812v ↗
19. Mechanical and electrical properties of carbon-nanotube-reinforced Cu-Ti alloy matrix composites10.1002/pssa.201228549 ↗
20. Interface optimization of CNT/Cu composite by forming TiC nanoprecipitation and low interface energy structure via spark plasma sintering10.1016/j.jallcom.2017.06.186 ↗
21. Well-dispersion of CNTs and enhanced mechanical properties in CNTs/Cu-Ti composites fabricated by Molecular Level Mixing10.1016/j.jallcom.2017.07.297 ↗
22. Interface structure and strengthening behavior of graphene/CuCr composites10.1016/j.carbon.2018.03.018 ↗
23. Epitaxial growth of chromium carbide nanostructures on multiwalled carbon nanotubes (MWCNTs) in MWCNT–copper composites10.1016/j.actamat.2012.10.022 ↗
24. Chemical-free graphene by unzipping carbon nanotubes using cryo-milling10.1016/j.carbon.2015.03.036 ↗
25. Interface interaction and synergistic strengthening behavior in pure copper matrix composites reinforced with functionalized carbon nanotube-graphene hybrids10.1016/j.carbon.2019.02.048 ↗
26. Effects of polarity and pH on the solubility of acid-treated carbon nanotubes in different media10.1016/j.carbon.2007.04.028 ↗
27. Balancing the strength and ductility of carbon nanotubes reinforced copper matrix composites with microlaminated structure and interdiffusion interface10.1016/j.msea.2017.12.044 ↗
28. Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons10.1016/j.carbon.2017.03.055 ↗
29. High strength and electrical conductivity of copper matrix composites reinforced by carbon nanotube-graphene oxide hybrids with hierarchical structure and nanoscale twins
30. Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network10.1039/C6NR07335B ↗
31. Strengthening effect of graphene derivatives in copper matrix composites10.1016/j.jallcom.2015.09.013 ↗
32. Creating defects on graphene basal-plane toward interface optimization of graphene/CuCr composites10.1016/j.carbon.2018.10.095 ↗
33. Strengthening behavior of carbon nanotube-graphene hybrids in copper matrix composites10.1016/j.msea.2018.02.006 ↗
34. Fabrication of CNT/Cu composites with enhanced strength and ductility by SP combined with optimized SPS method10.1016/j.jallcom.2018.03.029 ↗
35. Interface design of graphene/copper composites by matrix alloying with titanium10.1016/j.matdes.2018.02.038 ↗
36. In-situ space-confined synthesis of well-dispersed three-dimensional graphene/carbon nanotube hybrid reinforced copper nanocomposites with balanced strength and ductility10.1016/j.compositesa.2017.09.010 ↗
37. Leaf-like carbon nanotube-graphene nanoribbon hybrid reinforcements for enhanced load transfer in copper matrix composites10.1016/j.scriptamat.2017.05.024 ↗
38. Effect of heat treatment on interfacial bonding and strengthening efficiency of graphene in GNP/Al composites10.1016/j.compositesa.2019.04.010 ↗
39. Interface and mechanical/thermal properties of graphene/copper composite with Mo2C nanoparticles grown on graphene10.1016/j.compositesa.2018.03.014 ↗