journal article·2020-04

TEM observation of twins in surface grains of superelastic NiTi wire after cyclic loading

Jan Racek, Jan Duchoň, Marek Vronka, Miroslav Cieslar

Publisher page

Abstract

Abstract Since the surface dominates fatigue of medical grade NiTi wire by yet unexplained causes, for comparison, we carried out a TEM observation of surface grains, both after one thousand superelastic cycles and on the unloaded wire. Crystallographic defects consisting of aggregates of austenite twins stacked in the bands were observed after cycling deformation. The nuclei of aggregates are already present in an unloaded wire that originates from cold drawing or heat treatment. Severe plastic deformation induced by a stress increasing in the surface during a cyclic phase transformation enables an accumulation of these aggregates into bands at inclined angle of 55° to the wire axis corresponding to the spreading of diffused martensite band front paths during their propagation. An unrecovered strain, suppression of transformation and acceleration of crack propagation can be expected while the aggregates grow. Based on investigation of the grain orientation and boundaries in the twin lamellae using nano beam diffraction mapping, it can be proposed that, with exceeding martensite twin variant stress, twinning plane {1 1 4}B2 is a result of non-transforming pathway.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Force Microscopy Techniques and Applications · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Critical overview of Nitinol surfaces and their modifications for medical applications10.1016/j.actbio.2008.01.013 ↗
2. Effects of Lüders-like bands on NiTi fatigue behaviors10.1016/j.ijsolstr.2015.12.021 ↗
3. Effects of tube processing on the fatigue life of nitinol10.1007/s40830-018-0153-4 ↗
4. Instability of cyclic superelastic deformation of NiTi investigated by synchrotron X-ray diffraction10.1016/j.actamat.2015.04.039 ↗
5. Grain-resolved analysis of localized deformation in nickel-titanium wire under tensile load10.1126/science.aad6700 ↗
6. Monitoring tensile fatigue of superelastic NiTi wire in liquids by electrochemical potential10.1007/s40830-015-0020-5 ↗
7. Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy10.1016/j.actamat.2010.04.046 ↗
8. Quantitative studies of microstructural phase transformation in nickel–titanium10.1016/j.matlet.2012.12.063 ↗
9. Plastic deformation of B2-NiTi – is it slip or twinning?10.1080/09500839.2017.1316019 ↗
10. Grain orientation dependence of phase transformation in the shape memory alloy Nickel–Titanium10.1016/j.actamat.2015.04.026 ↗
11. Microstructure of NiTi shape memory alloy due to tension–compression cyclic deformation10.1016/S1359-6454(97)00379-0 ↗
12. Beyond the strain recoverability of martensitic transformation in NiTi10.1016/j.ijplas.2019.01.007 ↗
13. An origin of functional fatigue of shape memory alloys10.1016/j.actamat.2017.01.001 ↗
14. Transmission electron microscopy investigation of dislocation slip during superelastic cycling of Ni–Ti wires10.1016/j.ijplas.2010.05.005 ↗
15. Nanocrystallization and amorphization of NiTi shape memory alloy under severe plastic deformation based on local canning compression10.1016/j.jnoncrysol.2013.01.051 ↗
16. Transformation twinning and deformation twinning of NiTi shape memory alloy Materials10.1016/j.msea.2016.02.066 ↗
17. Austenite grain refinement during load-biased thermal cycling of a Ni49. 9Ti50. 1 shape memory alloy10.1016/j.actamat.2015.03.017 ↗
18. A thermodynamic theory for dislocation cell formation and misorientation in metals10.1016/j.actamat.2012.05.003 ↗