journal article·2019-09

Fracture strength of hot-pressed silicon carbide at the microscale

Daniel J. Magagnosc, Brian E. Schuster

Publisher page

Abstract

Abstract Tensile strength is a critical design parameter to ensure reliability of silicon carbide devices. However, SiC's tensile strength depends on the dominant flaw subjected to maximum tensile stress. Typically, processing related flaws (i.e. voids or inclusions) dominate the tensile response thereby masking role of the underlying microstructure. To probe the intrinsic microstructural flaws in a hot-pressed SiC microscale tensile bars were machined using a custom femtosecond laser micromachining apparatus from thin sections. When tested in tension, the fracture strength was dramatically higher compared to bulk tensile strengths. An analysis of strength-size scaling suggested a transition in the dominant strength-determining flaw at the microscale. Analysis of fracture surfaces and critical flaw sizes suggest failure is governed by isolated large grains. These observations have important implications for parameterizing ceramic failure models.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced ceramic materials synthesis · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Larsen · 1985
2. A review of ceramics for armor applications
3. Effect of microstructure and mechanical properties on the ballistic performance of SiC‐based ceramics
4. Grady · 1995
5. Predicting variability in the dynamic failure strength of brittle materials considering pre-existing flaws10.1016/j.jmps.2010.10.006 ↗
6. Direct observation of the dynamic compressive failure of a transparent polycrystalline ceramic (AlON)10.1111/j.1551-2916.2006.00965.x ↗
7. Some notes on the correlation between fracture and defect statistics: are Weibull statistics valid for very small specimens?10.1016/j.jeurceramsoc.2005.08.021 ↗
8. Aleatory uncertainty and scale effects in computational damage models for failure and fragmentation10.1002/nme.4699 ↗
9. Multi-scale defect interactions in high-rate brittle material failure. Part I: model formulation and application to ALON10.1016/j.jmps.2015.10.007 ↗
10. Multi-scale defect interactions in high-rate failure of brittle materials, Part II: application to design of protection materials10.1016/j.jmps.2015.10.006 ↗
11. Validating theories for brittle damage10.1007/s11661-007-9310-7 ↗
12. On the relationship between ceramic strength and the requirements for mechanical design10.1016/j.jeurceramsoc.2014.04.026 ↗
13. Microscale characterization of mechanical properties10.1146/annurev.matsci.36.062705.134551 ↗
14. Murray lecture tensile testing at the micrometer scale: opportunities in experimental mechanics10.1007/BF02410521 ↗
15. 25 year perspective Aspects of strain and strength measurement in miniaturised testing for engineering metals and ceramics10.1179/026708309X12584564052012 ↗
16. A critical review of microscale mechanical testing methods used in the design of microelectromechanical systems10.1007/BF02410522 ↗
17. A methodology to investigate size scale effects in crystalline plasticity using uniaxial compression testing10.1016/j.msea.2005.03.082 ↗
18. Ultrashort-pulse laser machining of dielectric materials10.1063/1.370197 ↗
19. Laser beam MicroMachining (LBMM) – a review10.1016/j.optlaseng.2015.03.017 ↗
20. The femtosecond pulse laser: a new tool for micromachining
21. Materials response to glancing incidence femtosecond laser ablation10.1016/j.actamat.2016.10.055 ↗
22. Dislocation injection in strontium titanate by femtosecond laser pulses10.1063/1.4928772 ↗
23. A. Ezis, Monolithic, Fully Dense Silicon Carbide Material, Method of Manufacturing and End Uses, U.S. Patent 5372978A, 1994.
24. Average grain size in polycrystalline ceramics10.1111/j.1151-2916.1969.tb11975.x ↗
25. Fracture strength of silicon carbide microspecimens10.1109/JMEMS.2005.851862 ↗
26. Tensile testing of ceramics10.1111/j.1151-2916.1987.tb04887.x ↗
27. Pilkey · 2008
28. Femtosecond laser machining of micro-tensile specimens for high throughput mechanical testing
29. ASTM C1239 · 2013
30. Strength and fracture toughness of in situ-toughened silicon carbide10.1023/A:1018635131661 ↗
31. Wright · 2014
32. Cho · 1997
33. Material properties of a sintered α-SiC10.1063/1.556000 ↗
34. Size-scaling of tensile failure stress in a hot-pressed silicon carbide10.1111/j.1744-7402.2010.02517.x ↗
35. Tensile rupture strength and fracture defects of sintered silicon carbide10.1111/j.1151-2916.1989.tb06198.x ↗
36. Fracture statistics of ceramics – Weibull statistics and deviations from Weibull statistics10.1016/j.engfracmech.2006.05.028 ↗
37. Fracture statistics of brittle materials: Weibull or normal distribution
38. Fractography of ceramics and glasses
39. Flexural strength, fracture toughness, and hardness of silicon carbide and boron carbide armor ceramics10.1111/j.1744-7402.2010.02501.x ↗
40. High-strength alkali-resistant sintered SiC fibre stable to 2,200 °C10.1038/35820 ↗
41. Advances in inorganic fibers10.1007/b104208 ↗
42. Landingham · 1972
43. Short-crack fracture toughness of silicon carbide10.1111/j.1551-2916.2008.02829.x ↗
44. Crack-growth resistance-curve behavior in silicon carbide: small versus long cracks10.1111/j.1151-2916.1997.tb03115.x ↗
45. Mechanical behavior of single crystalline and polycrystalline silicon carbides evaluated by vickers indentation10.2109/jcersj.109.1271_602 ↗
46. Fracture toughness of single-crystal silicon carbide10.1111/j.1151-2916.1977.tb15564.x ↗
47. Brannon · 2009
48. The use of sphere indentation experiments to characterize ceramic damage models10.1111/j.1744-7402.2010.02487.x ↗