Effect of powder oxidation on the anisotropy in tensile mechanical properties of bulk Al samples fabricated by spark plasma sintering
Source abstract
Abstract
Abstract This paper is a follow-up work reported in reference (L. Cao et al., Mater. Sci. Eng. A. 742 (2019) 305–308.). In the current work, we focused on the effect of the oxidation of Al powder particles on the anisotropy in tensile mechanical properties of bulk Al samples fabricated by spark plasma sintering (SPS). The tensile loading directions were respectively aligned with the transverse and longitudinal directions of materials. The results demonstrate that the oxidation of Al powder particles increases the anisotropy factor (defined as the ratio of the measured mechanical property value in the transverse direction to that in the longitudinal direction) from 1.18 to 2.76 of the elongation to fracture of bulk Al samples. Based on the analysis of the results, it is proposed that if the dominating cracks can initiate and propagate along interparticle boundaries during tensile deformation of a bulk metallic sample fabricated by thermomechanical powder consolidation, the shape of powder particles in the sample would play a major role in controlling its tensile ductility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Flow stress anisotropy in aluminium10.1016/0956-7151(90)90105-P ↗
2. Effect of microstructure and texture on forming behaviour of AA-6061 aluminium alloy sheet10.1016/j.msea.2016.10.027 ↗
3. Effects of heat-treatment on the plastic anisotropy of extruded aluminium alloy AA606310.1016/j.msea.2017.09.133 ↗
4. Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum10.1016/j.actamat.2013.04.036 ↗
5. The texture and anisotropy of magnesium–zinc–rare earth alloy sheets10.1016/j.actamat.2006.11.013 ↗
6. Quantitative assessment of the impact of second phase particle arrangement on damage and fracture anisotropy10.1016/j.actamat.2018.02.003 ↗
7. The plastic anisotropy of two-phase aluminium alloys—I. Anisotropy in unidirectional deformation10.1016/0001-6160(81)90106-1 ↗
8. Anisotropy of intermetallic particle cracking damage evolution in an Al-Mg-Si base wrought aluminum alloy under uniaxial compression10.1007/s11661-002-0331-y ↗
9. Strengthening and toughening mechanisms in graphene-Al nanolaminated composite micro-pillars10.1016/j.actamat.2016.11.043 ↗
10. Microstructure and mechanical behavior of NS/UFG aluminum prepared by cryomilling and spark plasma sintering10.1016/j.jallcom.2016.04.073 ↗
11. Structure and strength of aluminum with sub-micrometer/micrometer grain size prepared by spark plasma sintering10.1016/j.matdes.2013.01.018 ↗
12. Comparison of SPS processing behavior between as atomized and cryomilled aluminum alloy 5083 powder10.1007/s11661-017-4286-4 ↗
13. Microstructure and mechanical properties of nanocrystalline high strength Al–Mg–Si (AA6061) alloy by high energy ball milling and spark plasma sintering10.1016/j.msea.2009.08.041 ↗
14. Mechanical properties of Al/ω-Al-Cu-Fe composites synthesized by the SPS technique10.1016/j.matchar.2018.09.025 ↗
15. Spark plasma sintered Al-based composites reinforced with BN nanosheets exfoliated under ball milling in ethylene glycol10.1016/j.msea.2018.12.040 ↗
16. Effect of powder oxidation on interparticle boundaries and mechanical properties of bulk Al prepared by spark plasma sintering of Al powder10.1016/j.msea.2018.11.024 ↗
17. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
18. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed10.1016/j.actamat.2009.05.017 ↗
19. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
20. Nanostructured aluminium alloys produced by severe plastic deformation: new horizons in development10.1016/j.msea.2012.09.020 ↗
21. The effect of grain size and strain on the tensile flow stress of aluminium at room temperature10.1016/0001-6160(77)90171-7 ↗
22. Intergranular crack-deflection toughening in silicon carbide10.1111/j.1151-2916.1983.tb10084.x ↗
23. Role of interfacial grain-bridging sliding friction in the crack-resistance and strength properties of nontransforming ceramics10.1016/0001-6160(89)90299-X ↗
24. Fatigue crack deflection and fracture surface contact: micromechanical models10.1007/BF02816051 ↗
25. Crack deflection processes—I. Theory10.1016/0001-6160(83)90046-9 ↗
26. Crack-interface grain bridging as a fracture resistance mechanism in ceramics: I, Experimental study on alumina10.1111/j.1151-2916.1987.tb04982.x ↗
27. Crack-interface grain bridging as a fracture resistance mechanism in ceramics: II, Theoretical fracture mechanics model10.1111/j.1151-2916.1987.tb04983.x ↗
28. Crack deflection and propagation in layered silicon nitride/boron nitride ceramics10.1111/j.1151-2916.1998.tb02438.x ↗