Influence of the grain size on the strain variation on cooling and heating of Ni50.2Ti49.8 alloy under stress
Source abstract
Abstract
Abstract The aim of the paper is to study the combined effect of grain size and stress on the strain variation on cooling and heating of Ni50.2Ti49.8 alloy. To produce the samples with a 20–500 nm grain size, Ni50.2Ti49.8 alloy samples were subjected to high-pressure torsion (8 GPa, 3.5 turns) and subsequent heating. The strain variation in samples with different grain sizes was studied on cooling and heating under a tensile stress of 100–600 MPa. In the samples with 20 and 40 nm grain sizes, strain variation was found on cooling and heating if the stress was larger than some critical value, which depended on the grain size. In samples with 80–500 nm grain sizes, the strain variation on cooling under stress occurred in stages that were caused by different sequences of the martensitic transformation that depended on grain size and stress. Strain recovery always occurred in one stage and irrecoverable strain was found in all cases except for the sample with a 20 nm grain size. A reversible strain of 15% was found during cooling and heating under 400 MPa for the sample with a grain size of 130 nm. It was assumed that in this sample, the strain that appeared on cooling was caused by the forward transformation and deformation twinning that took place because plasticity was supressed in small grains. The strain that was induced by the deformation twinning was fully recoverable on subsequent heating and it gave the additional contribution to strain recovery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Martensitic phase transformations in nanocrystalline NiTi studied by TEM10.1016/j.actamat.2003.08.036 ↗
2. Effect of severe ausforming via equal channel angular extrusion on the shape memory response of a NiTi alloy10.1016/j.jnucmat.2006.12.007 ↗
3. Thermomechanical cyclic response of an ultrafine-grained NiTi shape memory alloy10.1016/j.actamat.2008.04.001 ↗
4. Grain size effect on the R-phase transformation of nanocrystalline NiTi shape memory alloys10.1007/s10853-014-8167-6 ↗
5. Variations in martensitic transformation parameters due to grains evolution during post-deformation heating of Ti-50.2 at.% Ni alloy amorphized by HPT10.1016/j.tca.2016.01.015 ↗
6. Transformation sequence in severely cold-rolled and annealed Ti50Ni50 alloy10.1016/j.msea.2006.02.124 ↗
7. Size effects on martensitic phase transformations in nanocrystalline NiTi shape memory alloys10.1179/174328408X302620 ↗
8. Size effects on the martensitic phase transformation of NiTi nanograins10.1016/j.jmps.2006.06.006 ↗
9. Competing accommodation mechanisms of the martensite in nanocrystalline NiTi shape memory alloys10.1016/j.msea.2007.03.122 ↗
10. An energy approach to determine the martensite morphology in nanocrystalline NiTi10.1002/adem.201600684 ↗
11. Structure and properties of Ti–Ni-based alloys after equal-channel angular pressing and high-pressure torsion10.1016/j.msea.2007.02.157 ↗
12. Effect of heat treatment on the structural and phase transformations and mechanical properties of TiNi alloy subjected to severe plastic deformation by torsion10.1134/S0031918X09120060 ↗
13. Phase transformations and functional properties of NiTi alloy with ultrafine-grained structure
14. Improvement of NiTi shape memory actuator performance through ultra-fine grained and nanocrystalline microstructures10.1002/adem.201000285 ↗
15. Functional properties of nanocrystalline, submicrocrystalline and polygonised Ti–Ni alloys processed by cold rolling and post-deformation annealing10.1016/j.jallcom.2010.10.142 ↗
16. Stress hysteresis and temperature dependence of phase transition stress in nanostructured NiTi - effects of grain size10.1063/1.4812643 ↗
17. Effects of grain size on the rate-dependent thermomechanical responses of nanostructured superelastic
18. Effects of grain size on phase transition behavior of nanocrystalline shape memory alloys10.1007/s11431-014-5505-5 ↗
19. Role of the structure and texture in the realization of the recovery strain resource of the nanostructured Ti-50.26 at % Ni alloy10.1134/S0031918X14090087 ↗
20. Shape memory effect in nanocrystalline NiTi alloy processed by high-pressure torsion10.1016/j.msea.2014.12.056 ↗
21. Dependence of the functional characteristics of thermomechanically processed titanium nickelide on the size of the structural elements of austenite10.1134/S0031918X16080123 ↗
22. Mechanical behavior of nanostructured TiNi shape memory alloy with different grain size10.1016/j.matpr.2017.04.081 ↗
23. Shape memory effects in Ti-50.2 at% Ni alloy with different grain size10.1016/j.msea.2017.08.113 ↗
24. Grain size effect on mechanical performance of nanostructured superelastic NiTi alloy10.1088/2053-1591/aa6074 ↗
25. Thermomechanical response of Titanium Nickelide on austenite grain/subgrain size10.1016/j.matpr.2017.04.080 ↗
26. Grain size effects on NiTi shape memory alloy fatigue crack growth10.1557/jmr.2017.395 ↗
27. Pseudoelasticity effect in amorphous – crystalline Ti40.7Hf9.5Ni44.8Cu5 shape memory alloy10.1088/0964-1726/24/4/045013 ↗
28. A new approach predicting the evolution of laminated nanostructures - martensite in NiTi as an example10.1088/1361-651X/aa5ab4 ↗
29. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
30. Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing
31. Crystal lattice of martensite and the reserve of recoverable strain of thermally and thermomechanically treated Ti–Ni shape memory alloys10.1134/S0031918X11020244 ↗
32. Shape memory effect and high-temperature superelasticity in high-strength single crystals10.1016/j.jallcom.2012.02.003 ↗