The tensile behaviors of vanadium-containing 25Cr-20Ni austenitic stainless steel at temperature between 200 °C and 900 °C
Source abstract
Abstract
Abstract The high-temperature tensile behaviors of two 25Cr-20Ni austenitic stainless steels with different V concentration (0 wt% V and 0.3 wt% V, respectively), have been studied at temperature between 200 ℃ and 900 ℃ . The ultimate tensile strength of both steels is strong temperature dependent, which decreases slowly first at 200–300 ℃ , keeps platform then at 300–500 ℃ and decreases rapidly afterwards from 600 ℃ to 900 ℃ . It is caused by the decreasing strain hardening ability, dynamic strain aging and dynamic recovery together with dynamic recrystallization at different temperatures. At higher than 800 ℃ , the elongation of both steels increases markedly due to the dynamic recovery and dynamic recrystallization. However, because of the deteriorated effects of M23C6 precipitates at grain boundary, the elongation of both steels at 700 ℃ does not increase despite decreasing strength. Additionally, the addition of 0.3 wt% V decreases the ductility of the material in the temperature range of 800 ℃ to 900 ℃ , which is induced by the impeding effects of solute vanadium on dynamic recovery and recrystallization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Creep strength of austenitic stainless steels for boiler applications
2. The development of HR3C steel with high elevated temperature strength and high corrosion resistance for boiler tubes
3. Microstructure evolution in HR3C austenitic steel during long-term creep at 650°C10.1016/j.msea.2016.10.077 ↗
4. Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels10.1016/j.actamat.2004.05.003 ↗
5. Tensile behaviour of 316LN stainless steel at elevated temperatures10.1179/1878641314Y.0000000014 ↗
6. Substructure of type 316 stainless steel deformed in slow tension at temperatures between 21°C and 816°C10.1016/0001-6160(73)90168-5 ↗
7. Stage-II tensile work hardening behaviour of type 316L(N) austenitic stainless steel10.1016/j.msea.2015.11.001 ↗
8. Grain-size effects on tensile behavior of nickel and AISI 316L stainless steel10.1007/s11661-003-0296-5 ↗
9. The influence of grain size on the strain-induced martensite formation in tensile straining of an austenitic 15Cr-9Mn-Ni-Cu stainless steel10.1016/j.msea.2013.04.107 ↗
10. Influence of temperature and grain size on the tensile ductility of AISI 316 stainless steel10.1016/0025-5416(85)90403-3 ↗
11. Hall-Petch behaviour of 316L austenitic stainless steel at elevated temperatures10.1179/026708302225005927 ↗
12. Effect of grain size on creep rate in type 316 stainless steel at 873 and 973K10.1179/030634583790427595 ↗
13. Influence of grain size on the mechanical behaviour of some high strength materials10.1007/BF00547918 ↗
14. Grain boundary sliding as a deformation mechanism during creep10.1080/14786437008220939 ↗
15. Grain boundary sliding in type 316 austenitic steel part III. The temperature dependence10.1016/0025-5416(77)90164-1 ↗
16. An investigation of grain-boundary sliding during creep10.1007/BF00572414 ↗
17. The grain size dependence of flow and fracture in a Cr-Mn-N austenitic steel from 300 to 1300K10.1007/BF02673673 ↗
18. Materials with complex behaviour
19. The effects of temperature and strain rate on the plastic flow and ductility of ultrafine-grained type 316 austenitic stainless steel10.1016/0025-5416(87)90325-9 ↗
20. The effect of M23C6 on the high-temperature tensile strength of two austenitic heat-resistant steels: 22Cr-25Ni-Mo-Nb-N and 25Cr-20Ni-Nb-N10.1016/j.msea.2011.01.079 ↗
21. Precipitation of M23C6 and its effect on tensile properties of 0.3C–20Cr-11Mn-1Mo-0.35N steel10.1016/j.matdes.2015.04.016 ↗
22. Effect of aging on the impact toughness of 25Cr-20Ni-Nb-N steel10.1016/j.msea.2009.12.039 ↗
23. High-temperature ductility of AISI 310 austenitic stainless steels10.1179/mst.1986.2.6.595 ↗
24. Precipitation of NbC in a model austenitic steel10.1016/S1359-6454(01)00389-5 ↗
25. Austenitic stainless steel bearing Nb compositional and plastic deformation effects10.1016/j.msea.2008.04.027 ↗
26. Precipitation strengthening of Nb-stabilized TP347 austenitic steel by a dispersion of secondary Nb(C,N) formed upon a short-term hardening heat treatment10.1016/j.msea.2015.09.028 ↗
27. Effect of Nb on recrystallization after hot deformation in austenitic Fe-Ni-C10.2355/isijinternational.43.1213 ↗
28. Effect of vanadium addition on the creep resistance of 18Cr9Ni3CuNbN austenitic stainless heat resistant steel10.1016/j.jallcom.2013.05.106 ↗
29. The nucleation of M23C6 carbide particles in the grain boundaries of an austenitic stainless steel10.1016/0001-6160(71)90033-2 ↗
30. Effect of vanadium and molybdenum addition on high temperature recovery, recrystallization and precipitation behavior of niobium-based microalloyed steels10.1016/0001-6160(83)90076-7 ↗
31. Influence of temperature on stacking fault energy and creep mechanism of a single crystal nickel-based superalloy10.1016/j.jmst.2016.01.020 ↗
32. Effect of dynamic strain aging on high temperature properties of austenitic stainless steel10.1016/j.msea.2004.03.004 ↗
33. Decomposition of austenite in austenitic stainless steels10.2355/isijinternational.42.325 ↗
34. Resistance to sensitization of austenitic chromium-nickel steels of 0.03-percent max carbon content
35. Combined matrix/boundary precipitation strengthening in creep of Fe-15Cr-25Ni alloys10.1016/0956-7151(91)90039-4 ↗
36. Effect of stacking fault energy on the dynamic recrystallization during hot working of FCC metals: a study using processing maps10.1007/BF02744618 ↗
37. Dynamic recovery and dynamic recrystallization competition on a Nb- and N-bearing austenitic stainless steel biomaterial: influence of strain rate and temperature10.1016/j.msea.2013.06.037 ↗
38. The tensile and low-cycle fatigue behavior of cold worked 316L stainless steel: influence of dynamic strain aging10.1016/j.ijfatigue.2003.12.002 ↗
39. Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni-Cr-W based superalloy10.1016/j.msea.2012.03.092 ↗