Fabrication and in situ compression testing of Mg micropillars with a nontrivial cross section: Influence of micropillar geometry on mechanical properties
Source abstract
Abstract
Abstract Micropillars with a nontrivial cross-sectional shape but constant cross-sectional area were fabricated from a pure magnesium single crystal with (0001) orientation by a focused gallium ion beam using a modified annular milling method. The basic mechanical properties (compressive modulus, strength at different plastic strain levels and hardening exponent) of those structures were determined under compression by means of in situ nanoindentation in scanning electron microscope and correlated by the micropillar cross-sectional circumference. It was observed that the modulus and strength increased with increasing circumference. The values of the modulus for the complex cross sectional shapes are on average higher by 5%, and the yield strength, ranging between 274 MPa and 342 MPa, is on average higher by 20% relative to micropillars with a simple circular or polygonal cross section. Surprisingly, the hardening exponent remains nearly constant regardless of the micropillar cross section.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · MXene and MAX Phase Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. The effect of size, orientation and alloying on the deformation of AZ31 nanopillars10.1016/j.jmps.2014.11.014 ↗
2. Evaluating focused ion beam induced damage in soft materials10.1016/j.micron.2013.04.005 ↗
3. Effects of the initial dislocation density on size effects in single-crystal magnesium10.1016/j.actamat.2013.03.019 ↗
4. Nanomechanical analysis of AZ31 magnesium alloy and pure magnesium correlated with crystallographic orientation10.1016/j.msea.2015.07.055 ↗
5. Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals10.1016/j.actamat.2010.11.064 ↗
6. Numerical study on microcompression tests of anisotropic single crystals10.1016/j.scriptamat.2007.06.057 ↗
7. Colbourne · 1987
8. Thermodynamic reassessment of the magnesium–gallium system10.1016/j.jallcom.2009.07.010 ↗
9. L.A. Giannuzzi, F.A. Stevie (Eds.), Introduction to Focused Ion Beams: Instrumentation, Theory, Techniques and Practice, SpringerScience+Business Media, Inc., 2005, ISBN 9780387231167.10.1007/b101190 ↗
10. Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients10.1016/j.actamat.2004.12.031 ↗
11. Nanoscale gold pillars strengthened through dislocation starvation10.1103/PhysRevB.73.245410 ↗
12. Gupta · 2011
13. Computational modeling of intrinsically induced strain gradients during compression of c-axis-oriented magnesium single crystal10.1016/j.actamat.2014.02.017 ↗
14. Review: developments in micro/nanoscale fabrication by focused ion beams10.1016/j.vacuum.2011.11.004 ↗
15. Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (EN ISO 14577-1:2015 E), CEN-CENELEC, Brussels.
16. FIB damage of Cu and possible consequences for miniaturized mechanical tests10.1016/j.msea.2007.01.046 ↗
17. Micro-compression testing: a critical discussion of experimental constraints10.1016/j.msea.2009.01.005 ↗
18. Kim · 2011
19. Nanopillar fabrication with focused ion beam cutting10.1017/S1431927614001032 ↗
20. Microcompression study of Mg (0001) single crystal10.1016/j.scriptamat.2009.12.048 ↗
21. Deformation modes in magnesium (0001) and (01-11) single crystals: simulations versus experiments10.1088/0965-0393/21/4/045010 ↗
22. Nalwa · 2004
23. Comparison of different experimental techniques for determination of elastic properties of solids10.1016/j.msea.2003.09.080 ↗
24. A high-intensity scanning ion probe with submicrometer spot size10.1063/1.90786 ↗
25. J.F. Ziegler, SRIM – TheStopping and Range of Ions in Matter. Website: 〈http://www.srim.org/〉, 2013.
26. Selvarajou · Acta Mater. · 2014 · 81 · 35810.1016/j.actamat.2014.08.042 ↗
27. The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile10.1016/0020-7225(65)90019-4 ↗
28. Focused ion beam milling, scanning electron microscopy, and focused droplet deposition in a single microcircuit surgery tool10.1116/1.584012 ↗
29. Formation and slip of pyramidal dislocations in hexagonal close-packed magnesium single crystals10.1016/j.actamat.2014.03.022 ↗
30. Elastic anisotropy of hcp metal crystals and polycrystals
31. M.D. Uchic, D.M. Dimiduk, J.N. Florando, W.D. Nix, Exploring specimen size effects in plastic deformation of Ni3(Al,Ta), MRS Proceedings 753 BB1.4. DOI: 10.1557/PROC-753-BB1.4, 2002.10.1557/PROC-753-BB1.4 ↗
32. A methodology to investigate size scale effects in crystalline plasticity using uniaxial compression testing10.1016/j.msea.2005.03.082 ↗
33. Plasticity of Micrometer-Scale Single Crystals in Compression10.1146/annurev-matsci-082908-145422 ↗
34. Texture evolution during large-strain hot rolling of the Mg AZ61 alloy10.1016/S0921-5093(03)00043-1 ↗
35. The design of accurate micro-compression experiments10.1016/j.scriptamat.2005.06.043 ↗
36. Molecular Dynamics Simulations of the Orientation Effect on the Initial Plastic Deformation of Magnesium Single Crystals10.1007/s40195-015-0353-2 ↗